Daily Offshore Platform Clearance — Shift Readiness Check

1. Platform, Date and Shift Identification

Complete this clearance at the start of each duty period. It records the information needed to confirm that the platform, the crew and the planned work are ready to proceed. It is a record-keeping aid only and does not replace any site-specific permit, risk assessment or instruction that may be required at your facility.


Platform, installation or facility name

Field, block or licence area

Clearance or record reference number

Date of this clearance

Shift start time


Shift end time

Which duty period does this clearance cover?


Person completing this clearance form

Role or job title of the person completing this form

Company or contractor

2. Environmental and Sea Conditions

Record the conditions observed at the time of clearance. Conditions offshore can change quickly, so re-check before starting any sensitive activity.


General weather outlook for this duty period


Wind speed observed (in knots)

Sea state at the time of clearance

Air temperature (in degrees)

Visibility

Are there any active weather-related restrictions in place on the platform?



3. Crew, Competence and Fitness for Duty

List the people involved in today's scope and confirm that their competence records and fitness status are current. Use the table to keep the manifest in one place.


Total personnel currently on the platform

Number of personnel directly involved in today's work scope

Crew manifest and readiness check

Full name

Company or contractor

Role or trade

Competence record current?

Fit for duty today?

Site induction valid?

A. Okafor
Marine Services Co.
Scaffold supervisor
R. Halim
Platform Operations
Mechanical technician
S. Neves
Inspection Services
Rope access inspector
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Has every person in the work crew received a task briefing for today's scope?


Are interpreters or additional communication aids needed for the briefing?


Is any crew member currently working under a temporary medical or fitness limitation?


4. Work Scope, Location and Hazard Identification

Brief description of the work to be carried out during this duty period

Exact work location (deck, module, level or equipment tag)

Which activities are included in today's scope?



Which hazard categories were identified for this scope?


Summary of the main controls agreed for these hazards

5. Isolation, Gas Testing and Equipment Readiness

Have all energy sources relevant to this scope been identified and isolated?


Has a gas test been carried out at the work location before starting?


Is continuous gas monitoring required during the work?


Which personal protective equipment is required for this scope?


Is specialist rescue equipment positioned at or near the work site?



6. Permits, Interfaces and Simultaneous Operations

Record the permits or work authorisations referenced for today's scope, and note any nearby activity that could affect the work front.


Permits and work authorisations referenced

Permit or authorisation reference

Activity covered

Area or equipment

Issued and in force?

Valid through date

Issuing authority name

HW-0417-02
Welding on pump base
Module B, P-2201
4/17/2026
M. Duarte
CSE-0417-01
Drain pit inspection
Module B, drain pit
4/17/2026
M. Duarte
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Are other work fronts or operations active nearby that could affect this scope?


Which interface activities are expected during this duty period?

Primary radio channel or call sign for this work front

Has a shared communication check been completed with the other active work fronts?


7. Emergency Preparedness and Control of the Work Area

Which emergency arrangements have been confirmed for this duty period?

Muster station assigned to the work crew

Has the emergency alarm been tested during this duty period?


Number of personnel accounted for at the most recent headcount

Is the work area tidy, with clear access and egress routes?


Are barriers, signage and exclusion zones in place around the work site?


8. Readiness Review and Declaration

Please review each statement below and record your assessment. If any item is not yet in place, note the outstanding action before work begins.


Rate the readiness of each area for this duty period

Not ready

Partly ready

Ready with minor actions

Fully ready

Not applicable

The work scope is clearly understood by the crew

All isolations and energy controls are in place

Gas testing and monitoring arrangements are complete

Barriers, signage and housekeeping are satisfactory

Interfaces with other work fronts are agreed

Emergency arrangements are understood and ready

Outstanding actions or conditions attached to this clearance

I confirm that the information recorded in this form is accurate to the best of my knowledge.

I understand that work will not begin until the controls listed in this form are in place and any outstanding actions are closed.

I understand that this form is a record-keeping aid and does not replace any site-specific permit, risk assessment, procedure or instruction that may be required at this facility.

Do you want a follow-up review before the next duty period?


Name of the person authorising this clearance

Role or position of the authorising person

Date and time of authorisation

Signature of the authorising person

Name of the person receiving the handover

Overall confidence that the work front is ready to proceed

Ready to design a form template that asks only the questions you need answered? Let's personalize it for efficiency! Edit this Daily Offshore Oil & Gas Platform Clearance Form
Not feeling this one? No sweat—Zapof lets you rock out with your own custom forms! 🎸 Auto-calculating tables? Check. Spreadsheet solos? Oh yeah. Encore!
This form is protected by Google reCAPTCHA. Privacy - Terms.
 
Powered by Zapof