Use this form to record the identification and verification of a metal alloy sample, including its expected grade, the elements analysed, the measured composition, the technique used, the specification reference and the final approval decision. Complete every field that applies to your work and leave the rest blank or mark them as not applicable.
Please note: this is a general-purpose recording template. It does not replace any contractual, statutory, laboratory accreditation or quality-system requirements that may apply to your organisation, customer or project. Where a specific requirement exists, follow that requirement and cite it in the specification fields below.
Sample ID/laboratory reference number
Batch, heat, cast or lot number
Parent item, component or project reference
Submitted by/requesting party
Contact email or telephone
Date sample received
Date and time analysis started
Primary reason for this analysis
Incoming material verification
Grade confirmation against a certificate
Failure or damage investigation
Rework or repair assessment
Research and development
Customer complaint or return
Unknown material identification
Other
Is this sample linked to a formal claim, dispute or escalated complaint?
Sample condition on receipt
Undamaged and complete
Surface contamination present
Deformed, cracked or broken
Incomplete or too small for repeat testing
Labelling unclear or missing
Other
Primary metal family
Iron or carbon steel
Stainless steel
Tool or high-speed steel
Cast iron
Aluminium
Copper or brass
Nickel or nickel-iron alloy
Titanium
Magnesium
Zinc or zinc alloy
Cobalt-based alloy
Precious or noble metal
Unknown/to be determined
Other
Product form of the sample
Bar, rod or billet
Plate, sheet or strip
Tube or pipe
Extrusion
Casting
Forging
Wire
Fastener or machined part
Weld deposit or weld sample
Powder or additive
Scrap or unclassified fragment
Other
Component or part description
Manufacturer, supplier or source (if known)
Declared region or country of origin (if stated on documentation)
Number of items or pieces submitted
Was the sample extracted from a larger item?
Surface condition or coatings observed (select all that apply)
Mill or as-cast finish
Machined or ground surface
Painted, lacquered or powder coated
Plated or cladded
Oxidised, scaled or corroded
Grease, oil or residue present
Surface treatment unknown
Other
Any visible markings, stamps, cast codes or colour codes on the sample
Record the grade that the material is expected to be, together with the document that defines its composition limits. If no grade was nominated, the section below can be used for open identification.
Expected grade or designation
Source of the expected grade
Purchase order or enquiry
Supplier material certificate
Engineering drawing
Customer or end-user request
Internal material library
Marking on the item itself
No expected grade supplied
Specification or standard reference used for limits
Specified composition limits or other acceptance criteria to be applied
Is a single grade nominated for confirmation?
Are there additional customer or project requirements beyond composition?
Properties normally associated with the expected grade that may need separate verification
None - composition only
Hardness
Tensile strength
Impact toughness
Corrosion resistance
Microstructure or grain size
Dimensional or geometric tolerance
Not applicable/not required
Surface preparation applied before analysis (select all that apply)
Analysed as received, no preparation
Solvent degrease or wipe
Abrasive cleaning or wire brushing
Grinding or face machining
Chemical etch or pickling
Ultrasonic cleaning
Coating removal before testing
Other
Preparation consumables used
Sample geometry presented to the instrument
Approximate mass of the test portion (g)
Was the sample melted, homogenised or dissolved before measurement?
Was the sample consumed or altered in a way that prevents re-testing?
Could any residual contamination from preparation affect the result?
Primary analytical technique used
X-ray fluorescence, bench spectrometer
X-ray fluorescence, handheld or portable
Optical emission spectrometry, spark or arc
Inductively coupled plasma optical emission
Inductively coupled plasma mass spectrometry
Atomic absorption spectrometry
Combustion analysis for carbon and sulfur
Inert gas fusion for oxygen, nitrogen or hydrogen
Wet chemical or gravimetric analysis
Density or specific gravity comparison
Other
Was a second, independent technique used for confirmation?
Instrument make and model
Instrument serial or asset number
Analytical method or procedure reference
Calibration standard or programme applied
Date of last calibration or verification
Next calibration or verification due date
Was a certified reference material or control sample analysed alongside the sample?
Number of replicate readings taken
Analyst name and identifier
Supervising analyst or technical checker (if applicable)
Enter one row per element or analyte. Where specification limits are known, enter the minimum and maximum so the conformity column can be evaluated automatically. Report all values in the same unit basis and state that basis in the second column.
Elemental composition results
Element or analyte | Basis or unit (e.g. percent by mass) | Specified minimum | Specified maximum | Measured value | Uncertainty plus or minus | Within limits | |
|---|---|---|---|---|---|---|---|
Cr | percent by mass | 16 | 18 | 17.42 | 0.15 | ||
Ni | percent by mass | 10 | 14 | 10.86 | 0.12 | ||
Mo | percent by mass | 2 | 3 | 2.31 | 0.09 | ||
Mn | percent by mass | 0 | 2 | 1.44 | 0.06 | ||
C | percent by mass | 0 | 0.03 | 0.021 | 0.004 | ||
Fe | percent by mass | 60 | 72 | 66.8 | 0.4 | ||
Use the table below to record replicate readings for key elements. The mean and spread are calculated automatically and can be used when judging how close a value sits to a specification limit.
Replicate readings and spread
Element | Reading 1 | Reading 2 | Reading 3 | Mean reading | Spread (max minus min) | |
|---|---|---|---|---|---|---|
Cr | 17.38 | 17.45 | 17.43 | 17.42 | 0.07 | |
Ni | 10.81 | 10.9 | 10.87 | 10.86 | 0.09 | |
Elements or analytes that were requested but not determined
None - all requested elements determined
Below the detection limit
Outside the calibrated range of the method
Not within the scope of the technique used
Insufficient sample remaining
Other
Notes on the results (for example unusual ratios, segregation, evidence of mixed material or values close to limits)
Overall grade match result
Confirmed match to the expected grade
Probable match, with reservations
Inconclusive
No match - a different grade is indicated
No match - composition outside the specified limits
Not assessed
Do all analysed elements fall within the specified limits?
Was the possibility of surface coating or plating effects excluded?
Are the measured values consistent with the sample's declared heat, batch or lot?
Confidence in the identification result
Additional characterisation performed or recommended
None required
Microstructure examination
Hardness testing
Tensile or mechanical testing
Corrosion testing
Repeat chemical analysis by another technique
Review of supplier documentation
Positive material identification review
Other
Please rank the following follow-up priorities, from highest to lowest priority
Re-test using an alternative technique | |
Request additional documentation from the supplier | |
Retain the sample for reference or arbitration | |
Report the deviation to the requesting party | |
Escalate for engineering or metallurgical review | |
No follow-up action required |
Were quality control checks performed during the work?
Measurement uncertainty considerations (for example sources of uncertainty, how the quoted uncertainty was estimated, or how it affects the conclusion)
Known limitations of the method applied (select all that apply)
Light elements below magnesium not reliably determined
Surface-sensitive measurement only
Coating or plating may influence results
Values near or below the detection limit
Matrix effects for unusual alloy combinations
Limited sampling of a heterogeneous item
No significant limitations identified
Other
Overall assessment of the data quality for the intended purpose
Poor
Fair
Good
Very good
Excellent
I confirm that the results recorded relate only to the sample as received and to the method stated in this report
I confirm that any areas of doubt or limitation have been recorded in this form
Is a non-conformance or deviation raised as a result of this analysis?
Immediate actions taken (select all that apply)
Sample quarantined or secured
Related material placed on hold
Supplier or vendor notified
Repeat or confirmatory analysis ordered
Additional samples requested
Requesting party informed
No action required
Other
Containment, corrective action and follow-up notes
Target date for resolution
Will the affected material be returned, reworked or scrapped?
Documents attached or available on file (select all that apply)
Calibration or verification record
Reference or control material certificate
Raw instrument output or spectra
Photographs of the sample and markings
Purchase order or enquiry documentation
Supplier material certificate
Sample transfer or chain of custody record
Previous analysis reports on the same item
Other
Upload supporting documents (certificates, raw data files, reports)
Upload a photograph of the sample as received
Record retention location and any retention period agreed for the sample and the report
Report or record identifier issued to the requester
This section records how the result was reviewed and released. Approval should reflect the evidence captured in the earlier sections and any limitations that were noted.
Reviewed by (name and role)
Review date
Approval status
Approved as reported
Approved with comments
Rejected - re-analysis required
On hold pending further information
In your judgement, are these results suitable for the purpose stated at the start of the form?
Additional comments, caveats or remarks
I confirm that the information recorded in this form is accurate to the best of my knowledge and reflects the work performed
Authorised signature
Analysis for Metal Alloy Identification and Composition Verification Form
Important Note:
This analysis provides strategic insights to help you get the most from your form's submission data for powerful follow-up actions and better outcomes.
AI-Generated Content: This template and its accompanying guidance are AI-generated to provide a practical starting point for your form-building needs. Please review and customise the content to ensure it is accurate, appropriate and suitable for your intended use.
This guide is provided for general informational and planning purposes only. It does not constitute professional, legal, financial, medical, employment, privacy, regulatory, or advice of any other kind, nor does it certify that this template is suitable or compliant for any particular jurisdiction or purpose.
Laws, regulations, industry practices and business requirements vary. You are responsible for reviewing and customising the template to suit your intended use and obtaining advice from appropriately qualified professionals where necessary.
Please delete this section before publishing your form. See our Terms of Service for further information.
This form presents a comprehensive and well-structured approach to recording the identification and verification of metal alloy samples. It covers the entire analytical workflow—from sample receipt and identification, through material description, expected grade and specification references, sampling and preparation, analytical method and instrumentation, measured elemental composition, grade conformity assessment, quality control and limitations, non-conformance handling, record retention, through to final review and approval. The form is logically organised into clearly labelled sections that follow a natural sequence of laboratory work, making it straightforward for an experienced analyst to complete systematically. Its strengths include an extensive set of conditional follow-up questions that capture relevant detail only when triggered, several automated calculation fields in the composition tables, and a thoughtful closing section addressing review, approval and sign-off. A few areas for potential refinement include the considerable overall length, which may deter time-pressed users, and the depth of detail in some optional sub-sections that could benefit from conditional visibility or collapsible groupings in a digital implementation.
The opening paragraphs set clear expectations by describing the form's purpose, scope and limitations. This is a strong design choice that helps users understand what is and is not covered by the recording template, reducing the risk of misinterpretation.
This section establishes the identity and traceability context for the analysis. Questions such as Sample ID/laboratory reference number and Submitted by/requesting party ensure every record can be linked to a specific sample and responsible party. Batch, heat, cast or lot number and Parent item, component or project reference support traceability to production lots and end-use components. Date sample received and Date and time analysis started capture the timeline of sample handling. Primary reason for this analysis uses a well-designed single-choice list with conditional follow-ups for each option, ensuring that context-specific references (such as purchase orders, certificates or complaint references) are captured only when relevant. Is this sample linked to a formal claim, dispute or escalated complaint? and its conditional branches distinguish formal disputes from routine internal work. Sample condition on receipt provides important context for interpreting results and includes follow-ups for contamination, labelling issues and other conditions.
This section captures descriptive and contextual information about the material. Primary metal family is well-designed with a broad option list and targeted follow-ups for stainless steel groupings and aluminium alloy series. Product form of the sample covers a wide range of product types relevant to alloy identification. Component or part description and Manufacturer, supplier or source (if known) support traceability and contextual understanding. Was the sample extracted from a larger item? is an important question that triggers follow-ups about sampling location—particularly valuable for weld and heat-affected zone analysis. Surface condition or coatings observed (select all that apply) addresses a common source of analytical interference. Any visible markings, stamps, cast codes or colour codes on the sample is a practical field that can corroborate or contradict other findings.
This section is critical for establishing the benchmark against which results are judged. Expected grade or designation anchors the analysis. Source of the expected grade provides important context—whether the expectation derives from a certificate, drawing, purchase order or no formal source at all. Specification or standard reference used for limits and Specified composition limits or other acceptance criteria to be applied capture the criteria explicitly. Is a single grade nominated for confirmation? elegantly branches between confirmation and open identification workflows. Properties normally associated with the expected grade that may need separate verification help set expectations about what is and is not covered by the analysis.
This section records how the sample was prepared before analysis—a critical factor affecting result validity. Surface preparation applied before analysis (select all that apply) covers a practical range of options. Sample geometry presented to the instrument and Approximate mass of the test portion (g) provide context for the measurement conditions. Was the sample melted, homogenised or dissolved before measurement? and Was the sample consumed or altered in a way that prevents re-testing? address important operational considerations. Could any residual contamination from preparation affect the result? prompts the analyst to reflect on preparation-related risks.
This section provides the analytical provenance for the results. Primary analytical technique used lists a comprehensive range of common techniques with conditional follow-ups. Was a second, independent technique used for confirmation? encourages cross-checking. Instrument make and model and Instrument serial or asset number identify the equipment. Calibration-related fields—including Calibration standard or programme applied, Date of last calibration or verification and Next calibration or verification due date—support the measurement credibility. Was a certified reference material or control sample analysed alongside the sample? is a strong quality-conscious question. Analyst name and identifier and Supervising analyst or technical checker (if applicable) identify who performed the work.
This section is the analytical core of the form. The Elemental composition results table is thoughtfully designed with columns for element, basis, specified limits, measured value, uncertainty and an automatic within-limits check via a formula. The Replicate readings and spread table automatically calculates mean and spread, providing useful context for judging how close values sit to specification limits. Elements or analytes that were requested but not determined with its conditional follow-ups addresses gaps transparently. Notes on the results allows free-text observations on unusual findings.
This section draws conclusions from the analytical data. Overall grade match result offers a well-structured range of outcomes with detailed follow-ups for each—including reservations, inconclusive results, alternative grade indications and out-of-limit elements. Do all analysed elements fall within the specified limits? with its yes/no branching captures both conforming and non-conforming scenarios. Was the possibility of surface coating or plating effects excluded? and Are the measured values consistent with the sample's declared heat, batch or lot? address important validity checks. Confidence in the identification result (a 1–5 digit rating) and the follow-up ranking question add useful qualitative dimensions.
This section demonstrates a mature approach to documenting analytical confidence. Were quality control checks performed during the work? and its follow-ups capture QC outcomes. Measurement uncertainty considerations and Known limitations of the method applied (select all that apply) provide transparency about the boundaries of the results. The confirmation checkboxes at the end reinforce accountability.
This section addresses what happens when results deviate from expectations. Is a non-conformance or deviation raised as a result of this analysis? with detailed categorisation follow-ups covers common scenarios such as material substitution, traceability gaps and preparation errors. Immediate actions taken (select all that apply) captures containment measures. Disposition options—such as return, rework, scrap or concession—complete the response workflow.
This section covers supporting documentation and record management. The list of Documents attached or available on file provides a useful checklist, and the file and image upload fields support comprehensive record-keeping. Record retention location and any retention period and Report or record identifier issued to the requester close the documentation loop.
The final section provides a structured sign-off process. Reviewed by (name and role) and Approval status (with detailed follow-ups for comments, rejection reasons and hold conditions) support quality review. In your judgement, are these results suitable for the purpose stated at the start of the form? is an excellent closing question that ties the analysis back to the original request. The confirmation checkbox and signature field provide accountability.
The form's greatest strengths are its logical workflow, extensive use of conditional follow-up logic that keeps the interface relevant to each scenario, automated calculations in the composition and replicate tables, and a thorough closing section addressing review, limitations and accountability. The multi-layered categorisation of analysis reasons, material families, grade match outcomes and non-conformances demonstrates deep domain awareness. Data quality is strongly supported through the inclusion of uncertainty fields, replicate calculations, QC tracking and limitation documentation. From a user experience perspective, the form is well organised with clear section headings and contextual help text. However, the overall length and number of fields may present a significant completion burden, especially for routine or simple analyses. Some of the deeper optional sub-sections—such as detailed non-conformance follow-ups or extended preparation records—could benefit from progressive disclosure in a digital implementation to reduce visual clutter. The form would benefit from a brief completion guide indicating which sections are always required versus conditionally relevant. Overall, this is a thorough, professional-grade recording template that balances analytical rigour with practical workflow considerations effectively.
Mandatory Question Analysis for Metal Alloy Identification and Composition Verification Form
Important Note:
This section explains why certain fields in this form are marked as required and provides general guidance on how these requirements may support the collection of complete, accurate and relevant information.
Required fields and information-collection obligations may vary depending on your industry, jurisdiction, business operations and intended use of the form. A field marked as required in this template does not necessarily mean that collecting the information is legally mandatory.
Please review each required field to determine whether it is necessary, appropriate and lawful for your particular purpose. Consider applicable privacy, data protection, consent and industry-specific requirements, and consult an appropriately qualified legal, privacy or compliance professional where necessary.
Please delete this section before publishing your form. See our Terms of Service for further information.
Question: Sample ID/laboratory reference number
Recommendation: Requiring this field supports accurate record-keeping by ensuring every analysis record has a unique, traceable identifier. This reduces the risk of duplicate or orphaned records and enables reliable cross-referencing with laboratory management systems and downstream documentation. Whether the identifier follows a specific format or naming convention may depend on the organisation's existing record-management practices.
Question: Submitted by/requesting party
Recommendation: Requiring this field ensures each analysis record can be associated with the person or organisation that initiated the request. This supports clear communication about results, follow-up queries and any escalations. For external submissions, this field also helps establish accountability and a point of contact.
Question: Primary reason for this analysis
Recommendation: Requiring this field establishes the operational context for the analysis at the outset. Knowing whether the analysis is for incoming verification, failure investigation, open identification or another purpose helps frame how results are interpreted and reported. It also drives conditional follow-up questions that collect scenario-specific references. The exact list of options may be tailored to reflect the typical range of activities within a given organisation or project.
Question: Primary metal family
Recommendation: Requiring this field supports appropriate method selection, calibration programme application and interpretation of results. Knowing the expected or suspected metal family at the start of the analysis guides many downstream decisions. In cases where the material is entirely unknown, the 'Unknown/to be determined' option ensures the form can still be completed without blocking submission.
Question: Expected grade or designation
Recommendation: Requiring this field provides a clear benchmark against which measured results can be compared. It anchors the conformity assessment and drives the specification reference and limit fields further along the form. In open-identification workflows where no grade was nominated, the form's broader design allows for this to be recorded as such, so the mandatory status should be reviewed in light of whether all expected workflows involve a nominated grade.
Question: Primary analytical technique used
Recommendation: Requiring this field is central to understanding the provenance and limitations of the results. The analytical technique determines detection capabilities, surface sensitivity, element coverage and measurement uncertainty—factors that directly influence how the reported composition is interpreted. Recording this information ensures the results can be properly contextualised by reviewers and end-users.
Question: Instrument make and model
Recommendation: Requiring this field supports equipment traceability and enables anyone reviewing the record to understand the capabilities and characteristics of the instrument used. Combined with calibration information captured elsewhere in the form, this contributes to the overall credibility and reproducibility of the recorded results.
Question: Analyst name and identifier
Recommendation: Requiring this field identifies the individual who performed the analysis, supporting clear accountability and enabling follow-up queries about the work. In contexts where analysis results may be reviewed, audited or queried at a later date, knowing who conducted the work is a practical operational necessity for record-keeping.
Question: Overall grade match result
Recommendation: Requiring this field captures the key outcome of the entire analysis. The grade match result—whether confirmed, probable, inconclusive, no match or not assessed—represents the analytical conclusion and drives downstream decisions such as material disposition, non-conformance handling and reporting. Making this field mandatory ensures a defined conclusion is always recorded rather than left implicit.
Question: Reviewed by (name and role)
Recommendation: Requiring this field documents who performed the review of the analysis record before release. This supports quality assurance processes by ensuring an independent check is recorded, and it provides traceability for the review step. The specific reviewer role or seniority requirements may vary depending on the organisation's internal quality processes.
Question: Approval status
Recommendation: Requiring this field ensures every analysis record reaches a defined conclusion state—approved, approved with comments, rejected or on hold. This prevents records from being left in an ambiguous state and supports clear downstream workflow decisions. The approval categories with conditional follow-ups ensure the rationale for the decision is captured where needed.
The mandatory field selection in this form focuses on core identification, analytical provenance, key outcome and review/approval touchpoints—a proportionate and sensible approach. The eleven mandatory fields span the beginning (sample ID, submitter, analysis reason), the analytical core (metal family, expected grade, technique, instrument, analyst) and the conclusion (grade match result, reviewer, approval status) of the workflow.