This check helps you record the condition of every window and exterior door opening so that comfort, draught and screen issues can be compared and prioritised. Please answer as accurately as you can. Approximate answers are perfectly acceptable where exact information is not available.
Full name of person completing this form
Email address
Telephone number
Property address or site location
Which description best matches the property?
Detached house
Semi-detached house
Terraced or row house
Townhouse
Apartment or flat
Mobile or manufactured home
Other
Approximate year the property was built
How many storeys does the property have?
Single storey
Two storeys
Three storeys
Four or more storeys
Not sure
Approximate total number of windows and exterior doors to be checked
Are you completing this check on behalf of someone else?
Understanding which season bothers you most helps frame the findings. Comfort problems often come from small, repeatable air paths around openings rather than from the whole building.
Which season causes the most discomfort in this home?
Hot season (cooling is the priority)
Cold season (warmth is the priority)
Both seasons equally
Shoulder seasons (spring and autumn)
Not sure
Which comfort problems have you noticed? Select all that apply.
Cold draughts near openings
Warm air coming in on hot days
Rooms that heat or cool unevenly
Condensation on glass
Outside noise heard through openings
Dust or pollen settling quickly
Insects entering the home
Water seepage during wind-driven rain
Windows or doors that stick or are hard to operate
None of the above
Other
Overall, how satisfied are you with the comfort around your windows and exterior doors?
Very dissatisfied
Dissatisfied
Neutral
Satisfied
Very satisfied
Indoor temperature you usually aim for during the season that concerns you most (in degrees)
Has anyone previously inspected or measured these openings?
List every window and exterior door you inspected. Use the agreed wording shown in the column hints so the results can be compared easily: for Opening Type use Left Window, Right Window or Sliding Door; for Screen Status use Clean & Intact, Dusty/Needs Wash or Torn/Holes; for Air Draft Presence use Sealed Tight, Minor Draft or Noticeable Breeze. Add as many rows as you need.
Room-by-room opening condition record
Room Name | Opening Type | Screen Status | Air Draft Presence | |
|---|---|---|---|---|
Living Room | Left Window | Clean & Intact | Minor Draft | |
Living Room | Sliding Door | Dusty/Needs Wash | Noticeable Breeze | |
Main Bedroom | Right Window | Torn/Holes | Sealed Tight | |
Kitchen | Left Window | Clean & Intact | Sealed Tight | |
How many openings in total showed a Noticeable Breeze?
How many openings in total showed a Torn/Holes screen status?
Air movement around openings is often intermittent, changing with wind direction, temperature difference and whether other doors or vents are open. Recording the pattern makes later comparisons far more useful.
How would you rate the worst draught you found?
Barely noticeable
Noticeable when sitting close
Noticeable across the room
Strong enough to move curtains or papers
Not sure
Where does the air seem to enter or escape? Select all that apply.
Around the window frame perimeter
Between the sash or sliding panel and the frame
Through the glazing bead or glass edge
At the sill or bottom rail
Around the door frame
Under the door at the threshold
Through keyholes, letter slots or vents
Through damaged or missing sealant
Not sure
Are the draughts still noticeable when the opening is fully closed and locked?
When are the draughts most noticeable? Select all that apply.
Windy days
Cold nights
After rain
When the heating or cooling is running
When interior doors are closed
When a fan or exhaust is running
All the time
Not sure
Overall airtightness of the openings you checked, from 1 (very leaky) to 5 (very tight)
Have you tried a simple smoke or flame test to trace air movement?
Screens keep insects out while allowing air through. Dirty or damaged mesh reduces airflow, encourages people to leave openings closed, and can let pests enter.
What is the general condition of the screens across the property?
All screens are clean and intact
Mostly clean, a few need washing
Several are dusty or need washing
Several have tears or holes
Some openings have no screen at all
Not applicable, no screens fitted
What screen or mesh problems did you observe? Select all that apply.
Surface dust or film
Pollen or kitchen grease build-up
Tears or holes in the mesh
Mesh pulled away from the frame
Bent or damaged frame
Missing retaining clips or spline
Sagging or bulging mesh
Discolouration or brittle material
None observed
Other
Have pets or animals damaged any screens?
Number of openings needing screen cleaning only
Number of openings needing screen repair or replacement
Every operable window and door that can be opened for ventilation has a screen fitted
Which mesh material do the screens appear to use?
Fibreglass mesh
Coated aluminium or metal mesh
Stainless steel mesh
Polyester or plastic mesh
Pleated or retractable mesh
Mixed materials
Not sure
Glass, frames and moving parts work together. A sound seal depends on straight frames, intact glazing and flexible seals that have not hardened or shrunk.
What type of glazing is fitted at most openings?
Single glazing
Double glazing
Triple glazing
Mixed types across the property
Not sure
What materials are the window and door frames made from? Select all that apply.
Wood
Aluminium
uPVC or vinyl
Composite
Steel
Mixed materials
Not sure
Which frame or sash problems did you notice? Select all that apply.
Peeling or flaking paint
Soft, cracked or rotting wood
Warping or bowing of sash or panel
Rust or corrosion
Gaps between frame and wall
Cracked or chipped glass
Scratched or cloudy glass
Loose glazing beads
None observed
Other
Is there any visible moisture or fogging between the panes of sealed units?
Do all windows open, close and lock smoothly?
Optional photo of the window or frame in the poorest condition
Exterior doors are large moving panels and are often the biggest single source of uncontrolled air movement. Small alignment or seal issues can have a noticeable effect.
Which exterior door types are present? Select all that apply.
Single hinged door
Double hinged doors
Sliding patio door
Folding or bi-fold door
Recessed or storm door
Side door or service door
Garage access door
Other
How would you describe the condition of the door threshold and bottom edge?
Sound and level with a good seal
Slight gap, light visible in places
Clear gap or visible daylight
Threshold damaged, worn or uneven
Not sure
Which door hardware or fitting issues did you notice? Select all that apply.
Loose handle or lever
Lock is stiff or misaligned
Hinges are loose or sagging
Door sticks or drags on the floor
Worn or missing weatherstripping
Door sweep not reaching the floor
Light visible around the edges
Rattling in the wind
None observed
Other
Does each exterior door close fully and latch without being pushed?
Roughly how large is the largest visible gap around an exterior door?
No visible gap
Less than about 2 mm
About 2 to 5 mm
About 5 to 10 mm
More than 10 mm
Not sure
Optional photo of the exterior door with the largest gap
Moisture around openings can point to air leakage, temperature differences or limited ventilation. Noting where and when it appears helps separate the possible causes.
Which moisture signs have you seen near windows or doors? Select all that apply.
Condensation on the glass surface
Condensation on the frame
Damp or musty smell
Mould or mildew spots
Peeling paint or bubbling finish
Water stains on the sill or floor
Soft or swollen timber
None observed
Other
Have you noticed water entering during rain?
How is the room usually ventilated during the colder months?
Windows opened briefly each day
Windows mostly kept closed
Mechanical ventilation or extractor fans used
Trickle vents or similar openings left open
Mixed habits across the home
Not sure
Are insulated curtains, cellular shades or similar window coverings in use?
Please rate the following statements about the openings you checked
Strongly disagree | Disagree | Neutral | Agree | Strongly agree | |
|---|---|---|---|---|---|
Glass surfaces stay clear of condensation on most mornings | |||||
Frames and sills feel dry to the touch | |||||
Rooms near openings feel comfortable at night | |||||
Air near openings feels fresh rather than stuffy |
Seals and draught-control products age at different rates. Recording what is already in place prevents duplicated work and highlights what may simply need refreshing.
Which draught-control or weatherproofing measures are already installed? Select all that apply.
Compression or foam weatherstripping
Caulk or sealant around frames
Door sweeps or brush strips
Threshold seals or drop seals
Storm windows or secondary glazing
Window film
Thermal curtains or cellular shades
Draught stoppers or snakes
None installed
Not sure
Approximate date when sealant or weatherstripping was last replaced
Have any windows or doors been replaced or upgraded in the last ten years?
Are you planning any window or door improvements in the next twelve months?
A little planning makes the inspection smoother and safer, especially for upper-storey openings or areas that need a ladder.
Preferred date for a follow-up visit or detailed check
Preferred start time
Preferred end time
How will access to the openings be arranged?
Occupant present throughout
Occupant present for part of the visit
Key or access code provided in advance
A representative will attend
Not decided yet
Will pets or animals be present during a visit?
Are there any access or safety considerations to note? Select all that apply.
Upper-floor openings needing a ladder
Restricted parking or narrow access
Occupants with limited mobility
Young children in the home
Work-from-home quiet hours to respect
Shared or communal areas requiring notice
None noted
Other
Number of openings located on upper floors or in hard-to-reach positions
Rough planning figures help compare options. The estimates below are your own planning numbers only and are not quotations or price guarantees.
Please rank these outcomes in order of importance to you, from most to least important.
Reducing draughts around openings | |
Keeping insects out | |
Reducing outside noise | |
Lowering heating or cooling demand | |
Preventing condensation and moisture | |
Improving ease of opening and closing | |
Refreshing the appearance of frames |
How urgent do you consider the work?
Immediately, before the next season
Within one to three months
Within six months
Within the next year
Simply monitoring for now
Rough budget you have in mind for improvements
Would you prefer to carry out simple tasks yourself?
Remedial action cost estimate
Action Description | Quantity | Estimated Unit Cost | Estimated Total | |
|---|---|---|---|---|
Clean and re-tension existing screens | 4 | $0.00 | $0.00 | |
Replace torn screen panels | 2 | $25.00 | $50.00 | |
Refresh sealant around a window frame | 3 | $15.00 | $45.00 | |
Fit a door sweep to an exterior door | 1 | $20.00 | $20.00 | |
$0.00 | ||||
$0.00 | ||||
$0.00 | ||||
$0.00 | ||||
$0.00 | ||||
$0.00 |
The information gathered here reflects your own observations at a particular moment and in particular weather conditions. It is intended as a practical starting point for planning comfort improvements and does not replace a detailed assessment by a qualified professional where one is needed.
Anything else you would like to add about your windows, doors or comfort
Best way to reach you about this check
I confirm that the information I have provided reflects my own observations to the best of my knowledge
I am happy to be contacted about the findings or about arranging a follow-up check
Signature of the person completing this form
Date the form was completed
Analysis for Home Window and Exterior Door Integrity Check Form
Important Note:
This analysis provides strategic insights to help you get the most from your form's submission data for powerful follow-up actions and better outcomes.
AI-Generated Content: This template and its accompanying guidance are AI-generated to provide a practical starting point for your form-building needs. Please review and customise the content to ensure it is accurate, appropriate and suitable for your intended use.
This guide is provided for general informational and planning purposes only. It does not constitute professional, legal, financial, medical, employment, privacy, regulatory, or advice of any other kind, nor does it certify that this template is suitable or compliant for any particular jurisdiction or purpose.
Laws, regulations, industry practices and business requirements vary. You are responsible for reviewing and customising the template to suit your intended use and obtaining advice from appropriately qualified professionals where necessary.
Please delete this section before publishing your form. See our Terms of Service for further information.
This Home Window and Exterior Door Integrity Check Form is a well-structured, room-by-room assessment tool designed to help homeowners identify draughts, screen damage and air leakage around windows and exterior doors, with the practical goal of improving seasonal comfort. The form is organised into ten logical sections that move from property identification through condition assessment, detailed inspection, remedial planning and scheduling. The overall design is thorough without being overwhelming, and it balances structured data collection with open-ended commentary so that both quantitative comparisons and qualitative context are captured.
This opening section establishes who is completing the form and where the assessment is taking place. Full name of person completing this form provides a clear point of contact and accountability for the observations recorded. Email address offers a reliable channel for follow-up communication and result sharing. Telephone number is kept optional, which is a sensible choice that reduces friction while still allowing the respondent to offer an alternative contact route. Property address or site location anchors the findings to a specific site, which is essential when comparing results over time or coordinating any follow-up work. Which description best matches the property? uses a single-choice format with a useful follow-up for the 'Other' option, ensuring no property type is excluded. Approximate year the property was built and How many storeys does the property have? provide helpful building context that may inform expectations about typical construction and opening types. Approximate total number of windows and exterior doors to be checked sets a scope expectation and helps verify completeness of the room-by-room table later. The yes/no question Are you completing this check on behalf of someone else? with its conditional follow-up is a thoughtful touch that accommodates agents, family members or property managers.
This section frames the assessment around the respondent's lived experience. Which season causes the most discomfort in this home? is a mandatory single-choice question with well-designed follow-ups for each season, allowing the respondent to describe specific patterns. Which comfort problems have you noticed? Select all that apply. is a comprehensive multiple-choice list covering draughts, temperature imbalance, condensation, noise, dust, insects and water seepage, with targeted follow-ups for several options. This approach efficiently gathers broad symptom data while drilling into specifics only where relevant. Overall, how satisfied are you with the comfort around your windows and exterior doors? provides a useful baseline satisfaction rating. Indoor temperature you usually aim for during the season that concerns you most (in degrees) captures a practical reference point. The question Has anyone previously inspected or measured these openings? with its follow-up helps avoid duplicating work and provides historical context.
The room-by-room table is the centrepiece of the form and directly addresses the key data collection requirement. The table includes columns for Room Name, Opening Type (Left Window, Right Window, Sliding Door), Screen Status (Clean & Intact, Dusty/Needs Wash, Torn/Holes) and Air Draft Presence (Sealed Tight, Minor Draft, Noticeable Breeze). The introductory paragraph clearly explains the agreed terminology, which promotes consistency across entries. Pre-populated example rows demonstrate the expected format. The two follow-up numeric questions — How many openings in total showed a Noticeable Breeze? and How many openings in total showed a Torn/Holes screen status? — serve as useful summary counts that can be cross-checked against the table rows.
This section deepens the analysis of air movement. How would you rate the worst draught you found? is a mandatory single-choice question that captures the severity of the most significant issue. Where does the air seem to enter or escape? Select all that apply. provides a detailed list of common air paths. Are the draughts still noticeable when the opening is fully closed and locked? is a mandatory yes/no question with thoughtful follow-ups for both 'yes' and 'no' responses, helping distinguish between seal failures and operational issues. When are the draughts most noticeable? Select all that apply. captures timing patterns. The digit rating question for overall airtightness provides a quick summary metric. The optional smoke or flame test question with its safety-conscious paragraph is a practical and responsible addition.
This section focuses on screen integrity. What is the general condition of the screens across the property? is a mandatory single-choice overview question. What screen or mesh problems did you observe? Select all that apply. provides a thorough checklist with an 'Other' follow-up. The pet damage question, screen cleaning and repair count questions, the coverage checkbox and the mesh material question together build a complete picture of screen condition and maintenance needs.
This section examines the structural and glazing elements. What type of glazing is fitted at most openings? is a mandatory single-choice question that establishes a key building characteristic. Frame material and condition questions capture construction details and visible defects. Is there any visible moisture or fogging between the panes of sealed units? addresses a common issue with insulated glazing. Do all windows open, close and lock smoothly? is a mandatory yes/no question that assesses operational functionality. The optional photo upload for the poorest-condition window adds valuable visual documentation.
This section addresses doors specifically, recognising their outsized role in air leakage. Door type, threshold condition, hardware issues, closing action and gap size are all covered. How would you describe the condition of the door threshold and bottom edge? is a mandatory single-choice question targeting a common draught source. Does each exterior door close fully and latch without being pushed? is a mandatory yes/no question with useful follow-ups. The optional photo upload for the largest gap provides visual evidence.
This section connects moisture observations to potential air leakage and ventilation patterns. Moisture signs, rain ingress, ventilation habits and window coverings are all captured. Have you noticed water entering during rain? is a mandatory yes/no question with a detailed follow-up. The matrix rating question covering condensation, dryness, comfort and air freshness provides a structured perceptual assessment across four dimensions.
This section records what is already in place, which is valuable for avoiding duplicated recommendations. Installed draught-control measures, last replacement dates, past upgrades and planned improvements are all captured with appropriate follow-ups. The date field for Approximate date when sealant or weatherstripping was last replaced helps assess the remaining service life of existing measures.
This practical section covers visit logistics including preferred date and times, access arrangements, pet presence, safety considerations and hard-to-reach openings. These fields support efficient scheduling and safe working conditions for any follow-up visit.
This section helps translate findings into action. The ranking question captures the respondent's priorities across seven outcomes. Urgency, budget and DIY preference questions help tailor recommendations. The Remedial action cost estimate table with its formula column (Estimated Total = Quantity × Estimated Unit Cost) is a practical planning tool, and the introductory paragraph appropriately frames these as the respondent's own planning figures rather than quotations.
The closing section includes a disclaimer paragraph, an open notes field, contact preference, a confirmation checkbox, a consent-to-contact checkbox, a signature field and a completion date. This provides a clear and responsible closing to the form.
This form demonstrates strong design across several dimensions. Its logical flow from identification through assessment to planning mirrors a natural inspection workflow. The room-by-room table with standardised terminology directly supports the stated data collection goal and enables meaningful comparison across openings. The extensive use of conditional follow-ups (options follow-up, yes/no follow-up) keeps the form relevant to each respondent's situation without burdening them with irrelevant questions. The balance of structured and open-ended questions allows for both quantitative analysis and rich contextual detail. The form also includes practical touches such as safety notes, photo uploads and scheduling fields that reflect real-world usage. One area worth noting is the length of the form — with ten sections and many questions, completion may require a significant time investment. However, the clear section headings, helpful introductory paragraphs and well-chosen placeholders help guide the respondent through the process. The inclusion of summary count questions alongside the detailed table also helps cross-validate the data. Overall, this is a comprehensive and thoughtfully designed form that should collect high-quality, actionable data for improving home comfort around windows and exterior doors.
Mandatory Question Analysis for Home Window and Exterior Door Integrity Check Form
Important Note:
This section explains why certain fields in this form are marked as required and provides general guidance on how these requirements may support the collection of complete, accurate and relevant information.
Required fields and information-collection obligations may vary depending on your industry, jurisdiction, business operations and intended use of the form. A field marked as required in this template does not necessarily mean that collecting the information is legally mandatory.
Please review each required field to determine whether it is necessary, appropriate and lawful for your particular purpose. Consider applicable privacy, data protection, consent and industry-specific requirements, and consult an appropriately qualified legal, privacy or compliance professional where necessary.
Please delete this section before publishing your form. See our Terms of Service for further information.
Full name of person completing this form
Recommendation: Requiring this field ensures that each submission can be clearly attributed to an individual, supporting accurate record-keeping and enabling appropriate follow-up communication. In the context of this form, knowing who performed the observations helps establish accountability and allows any clarifications to be directed to the right person. Form administrators may wish to consider whether a display name or a full legal name better suits their processing needs.
Email address
Recommendation: Marking the email address as mandatory supports reliable communication about findings, follow-up scheduling and any remedial recommendations. It serves as a primary digital channel for sharing results and coordinating next steps. Depending on how the collected data is managed, consider providing a clear notice about how contact details will be used and stored.
Property address or site location
Recommendation: Requiring the property location anchors the observations to a specific site, which is operationally important for any follow-up visit, for comparing results over time and for organising records across multiple properties. Without a location reference, the room-by-room findings would lack the context needed for practical action.
Which description best matches the property?
Recommendation: Requiring a property type helps frame expectations about typical construction, opening types and likely draught patterns. It provides useful context for interpreting the room-by-room condition data and for tailoring any recommendations. The conditional follow-up for 'Other' ensures flexibility while still capturing this baseline classification.
Approximate total number of windows and exterior doors to be checked
Recommendation: Requiring a total opening count supports completeness checking against the room-by-room table. It helps verify that all relevant openings have been recorded and flags any discrepancies between the stated scope and the actual inventory entries. This is a practical data-quality safeguard for the form's core data collection goal.
Which season causes the most discomfort in this home?
Recommendation: Requiring a seasonal focus helps frame the findings around the respondent's primary concern and guides prioritisation of remedial actions. It establishes whether cooling, warming or year-round comfort is the main objective, which directly influences how the draught and screen findings should be interpreted and acted upon.
How would you rate the worst draught you found?
Recommendation: Requiring a severity rating for the worst draught captures a key summary metric that supports prioritisation. It provides a quick reference point for comparing the overall impact of air leakage across different properties or across time. This mandatory rating complements the detailed room-by-room data with a single, easily comparable figure.
Are the draughts still noticeable when the opening is fully closed and locked?
Recommendation: Requiring this yes/no response helps distinguish between seal or frame issues (where draughts persist even when secured) and operational issues (where locking resolves the problem). This distinction is operationally useful for directing the right type of remedial action. The conditional follow-ups for both responses capture the specific details needed to understand the pattern.
What is the general condition of the screens across the property?
Recommendation: Requiring an overall screen condition assessment provides a property-level summary that complements the individual screen entries in the room-by-room table. It helps establish a baseline for screen maintenance needs and supports quick comparison across properties. The mandatory status ensures this summary is always available alongside the detailed data.
What type of glazing is fitted at most openings?
Recommendation: Requiring a glazing type classification is operationally useful because it influences expectations about thermal performance, condensation likelihood and typical draught patterns. It provides essential context for interpreting the moisture and comfort findings. The 'Not sure' option keeps the field accessible to respondents who may not know the technical details.
Do all windows open, close and lock smoothly?
Recommendation: Requiring this operational check captures whether the moving parts and seals are functioning as intended. Smooth operation is a practical indicator of overall opening health, and difficulties here can indicate alignment issues that contribute to draughts. The conditional follow-ups for both 'yes' and 'no' responses gather the relevant detail without overburdening the respondent.
How would you describe the condition of the door threshold and bottom edge?
Recommendation: Requiring this assessment targets one of the most common sources of uncontrolled air movement around exterior doors. Threshold and bottom-edge condition directly affects sealing performance, and capturing this mandatory detail supports targeted recommendations for door sweeps, threshold seals or related measures.
Does each exterior door close fully and latch without being pushed?
Recommendation: Requiring this operational check for exterior doors helps identify alignment, hinge or hardware issues that may cause persistent air leakage. Doors that do not latch cleanly often leave gaps that allow draughts even when nominally closed. The conditional follow-ups gather specifics about affected doors and suspected causes.
Have you noticed water entering during rain?
Recommendation: Requiring this yes/no response captures a significant indicator of seal or frame integrity issues. Water ingress during rain can point to gaps, failed seals or drainage problems around openings. The detailed follow-up for 'yes' responses helps pinpoint affected locations and the pattern of water entry, supporting more targeted remedial planning.
I confirm that the information I have provided reflects my own observations to the best of my knowledge
Recommendation: Requiring this confirmation checkbox establishes that the respondent acknowledges the observational nature of the data provided. It supports the integrity of the record and clarifies the basis on which the information was gathered. This is a practical accountability measure for a form that relies on self-reported observations.
Signature of the person completing this form
Recommendation: Requiring a signature formalises the submission and links it to the named individual at the start of the form. It provides a clear record of who completed the assessment and when, which supports record-keeping and any subsequent discussions about the findings.
Date the form was completed
Recommendation: Requiring a completion date is important because window and door conditions can change with weather, seasons and wear. Knowing when the observations were made helps interpret the findings accurately and supports meaningful comparison if the form is completed again at a later date.
The form currently marks 17 fields as mandatory across its ten sections, covering identity and contact details, property classification, core condition assessments, operational checks and closing confirmations. This distribution is reasonably well balanced: mandatory fields are spread across the form rather than concentrated in a single section, which helps maintain respondent engagement throughout the lengthy questionnaire.
Key observations and recommendations: