Melt Flow Index Testing Form: Record Test Conditions, Extrudate Data & Melt Flow Rate Results

1. Purpose of this form and how to complete it

This worksheet is designed to document a melt flow index (MFI) test on a thermoplastic material. It records the information typically needed to describe how a polymer flows under heat and a defined load, which can help when comparing batches, checking consistency and discussing processing behaviour. Please complete each field with the values actually observed during your test. This form is a general-purpose record template; it does not replace any specific standard, customer requirement or internal procedure that your organisation may follow.

Fields marked as required should be completed before the record is saved. Where a value is calculated by the form, check it against your own working before relying on it. If a question does not apply to your test, leave it blank or select the 'Not applicable' option where one is provided.


Date this record was started

Laboratory, department or site name

Record or worksheet reference number

2. Sample identification and material details

Accurate sample identification is essential for traceability. Record the identifier exactly as it appears on the sample label or submission form, together with the polymer family and any grade or trade designation supplied with the material.


Sample ID/sample number

Batch, lot or production number

Material grade, product code or trade designation

Supplier or material source

Polymer family (base resin type)





Sample form as received


Is the material filled or reinforced (for example with glass fibre, mineral filler or carbon)?


Which additives or modifiers are declared for this material? (select all that apply)

Optional photograph of the sample and its label

Choose a file or drop it here

Optional attachment: material datasheet, certificate of analysis or submission form

Choose a file or drop it here
 

3. Material specification and acceptance expectations

Record the specification, customer document or internal target used to judge the material. If no formal specification applies, you may leave these fields blank and simply report the measured value.


Is there a material specification, datasheet value or customer requirement for the melt flow rate of this sample?


Specified melt flow rate value or nominal target

Specified tolerance or acceptance limits

Conditions stated in the specification (temperature and load)

Does the specification require a particular conditioning or drying step before testing?


Reference method or procedure used for this test


4. Test equipment and instrument details

Note which instrument was used and confirm that it was in a serviceable condition. Keep the identification consistent with your equipment register so the test can be traced back to the instrument used.


Type of melt flow test apparatus used



Instrument make and model

Instrument asset/serial number

Balance or scale identification and readability

Was the balance checked with a reference weight on the day of testing?


Was the temperature indication of the apparatus verified before the test?


Most recent calibration or service date of the melt flow apparatus

Any known limitations, faults or notes about the equipment on the day

5. Die, cylinder and piston configuration

The die and cylinder geometry strongly influence the reported flow value. Record the actual dimensions of the components fitted to the instrument, together with their condition.


Die identification or reference number

Die bore diameter (mm)

Die land length (mm)


Cylinder (barrel) bore diameter (mm)

Piston diameter (mm)


Distance from die surface to the reference piston position used for timing (mm)

Condition of the die bore and land


Was the die cleaned before this test?


Was any release agent or lubricant used on the die, cylinder or piston?


6. Test conditions: temperature, load and timing

Enter the set-point and, where available, the actual temperature observed during the test. The applied load is the combined mass acting on the piston, including the piston weight itself where this forms part of the applied load on your instrument.


Set test temperature (°C)

Actual temperature observed during the test (°C)

Allowed temperature variation from set-point (± °C)

Temperature units and scale used for reporting

Was the barrel allowed to stabilise at the set temperature before charging the sample?


Nominal applied load (kg)

Applied load expressed in newtons (N), if used by your procedure

Load composition on the piston


Piston mass (g), if recorded separately

Test duration or cut-off time for the timed extrusion segment (s)

Was the same test duration used for every repeat measurement?


Atmosphere around the instrument (if controlled or noted)

7. Sample preparation, conditioning and charging

How the sample is prepared and loaded can affect the result. Note drying, conditioning, sample mass charged and any pre-compaction steps actually carried out.


Was the sample dried or conditioned before testing?


Total sample mass charged into the barrel (g)

Number of charge increments used to fill the barrel

Method used to fill and settle the sample in the barrel


Pre-heat time after charging, before the load was applied (s or min – please state units in your answer)

Was the sample compacted to remove trapped air before the run?


Additional notes on sample preparation (for example particle size, pellet cutting, or blending of regrind)

8. Test procedure and sequence of events

Briefly outline the sequence actually followed during the test so that another operator could repeat the work from this record.


Step-by-step summary of the procedure followed

Which procedural steps were carried out during this test? (select all that apply)


Was any part of the standard sequence modified or adapted for this material?


Start time of the test run

End time of the test run


9. Measurement calculations

The melt flow rate is commonly reported as the mass of material extruded through the die in a ten-minute period under the stated conditions. The relationship below is shown for reference so the calculations in the results table can be checked. Different procedures may use different conventions; report values according to the procedure your laboratory follows.



In the expression above, m is the extruded mass in grams for the timed segment, t is the segment duration in seconds, and the factor 600 converts the value to a ten-minute basis. If a timed segment is shorter or longer than the usual interval, the same relationship can still be applied.


Timed segment duration used in the calculation, t (s)

Extruded mass for the primary result, m (g, 3 decimal places)

Melt flow rate calculated by the operator (g/10 min)

Number of decimal places used when reporting the result

10. Repeat measurements and results table

Enter each timed cut as a separate row. The MFR column is calculated automatically from the cut time and extruded mass; check the values against your own working. Add or remove rows as needed for the number of repeats performed.


Individual measurement record

Measurement number

Cut time t (s)

Extruded mass m (g)

Calculated MFR (g/10 min)

Extrudate appearance

Included in average?

1
300
2.54
5.08
Smooth, continuous strand
2
300
2.61
5.22
Smooth, slight die swell
3
300
2.57
5.14
Smooth, uniform colour
4
300
2.42
4.84
Traces of entrapped air
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Number of valid repeat measurements included

Average melt flow rate (g/10 min)

Lowest individual result (g/10 min)


Highest individual result (g/10 min)

Spread between highest and lowest result (g/10 min)

Standard deviation of the repeat results (g/10 min), if calculated

Which value is reported as the final result?


Did the repeat results agree within the spread your laboratory normally expects for this type of material?


Optional summary statement of the result

11. Extrudate observations and anomalies

Observations during extrusion can help interpret an unexpected result. Record anything notable about the strand, colour, odour or behaviour of the melt.


Which features were observed during extrusion? (select all that apply)


Was any measurement repeated because of an anomaly?


Free-text observations, including anything another operator should watch for next time

Optional photograph of the extrudate strands

Choose a file or drop it here

12. Environmental and ancillary conditions

Ambient conditions are usually of limited influence on this type of test, but recording them can help when results are compared between days, sites or instruments.


Ambient temperature in the test area (°C)

Relative humidity in the test area (%)


Was the instrument located away from draughts, direct sunlight or vibration sources?


Other instruments or equipment running nearby, if relevant

13. Result review and outcome

Compare the reported value with the specification or target recorded earlier, if one exists. Where no specification applies, record how the result is intended to be used.


Outcome against the recorded specification or target



Is further testing recommended (for example a re-test, additional temperatures or additional loads)?


Was the result compared with a previous result for the same material or grade?


Interpretation or comments (processing behaviour, consistency between lots, or suitability for a stated process – described in neutral terms)

14. Operator declaration and sign-off

By signing below, the operator confirms that the entries in this record reflect the work actually performed and the values actually observed. Any estimated or assumed values should be identified in the notes above.


Operator name

Operator ID, initials or role

Reviewer or approver name (if your process requires review)

Date of sign-off

I confirm the information recorded in this form is complete and accurate to the best of my knowledge

Operator signature

Reviewer or approver signature (if applicable)

15. Optional feedback on this form

Your feedback helps improve the layout and wording of this worksheet. It is optional and does not affect the test record.


How easy was this form to complete?

How well did the fields cover the information you needed to record?

Suggestions for improvement, or fields you would like added

Analysis for Melt Flow Index (MFR) Testing Form – Thermoplastic Material Characterization

Important Note:

This analysis provides strategic insights to help you get the most from your form's submission data for powerful follow-up actions and better outcomes.

AI-Generated Content: This template and its accompanying guidance are AI-generated to provide a practical starting point for your form-building needs. Please review and customise the content to ensure it is accurate, appropriate and suitable for your intended use.

This guide is provided for general informational and planning purposes only. It does not constitute professional, legal, financial, medical, employment, privacy, regulatory, or advice of any other kind, nor does it certify that this template is suitable or compliant for any particular jurisdiction or purpose.

Laws, regulations, industry practices and business requirements vary. You are responsible for reviewing and customising the template to suit your intended use and obtaining advice from appropriately qualified professionals where necessary.

Please delete this section before publishing your form. See our Terms of Service for further information.



This melt flow index (MFR) testing worksheet is a comprehensive laboratory record designed to capture the conditions, measurements and observations associated with characterising the flow behaviour of a thermoplastic material under heat and a defined load. The form is structured in a logical sequence that mirrors the real-world order of laboratory work: administrative identification first, then material and specification context, equipment and die configuration, test conditions, sample preparation, procedure, calculations, repeat measurements, observations, environmental context, outcome review and finally operator sign-off. This walkthrough reviews the design of the form section by section, highlighting what each question contributes to the record and where the structure supports reliable data capture.


Purpose and Administrative Details

The introductory text sets expectations clearly: the form is described as a general-purpose record template rather than a substitute for any specific internal procedure or customer document, and the guidance on required fields, calculated values and the “Not applicable” option helps the operator understand what is expected before they begin.


Date this record was started establishes the chronological anchor for the worksheet. In a laboratory context where tests may span several sessions or be reviewed at a later date, recording the start date supports sequencing, retention and any future reconciliation with other records.


Laboratory, department or site name identifies where the work was performed. This is a practical attribution field that helps distinguish records created in different locations, which is useful when results are later compared across sites or compiled for a multi-site review.


Record or worksheet reference number is offered as an optional field with a helpful placeholder. Leaving it optional is a sensible design choice, because not every laboratory uses a formal worksheet numbering scheme, while those that do can still capture their reference.


Sample Identification and Material Details

This section is one of the strongest parts of the form, because the identity of the sample determines whether the entire record remains useful later on.


Sample ID/sample number is the primary traceability key. Capturing the identifier exactly as it appears on the label reduces the risk of ambiguity when the record is compared against the original submission.


Batch, lot or production number, Material grade, product code or trade designation and Supplier or material source add the context needed for meaningful batch-to-batch comparison. Their optional status is reasonable, since this information is not always supplied with a sample.


Polymer family (base resin type) is a well-designed branching question. The option list covers commonly encountered thermoplastic families, and the follow-ups for polyethylene, PVC, PET, polyamide and the catch-all “Other” option collect material-specific context (such as variant, drying history or moisture state) only when it is relevant. This keeps the form compact for common materials while still capturing detail where it matters.


Sample form as received similarly branches into a follow-up for regrind and a free-text description for unusual sample forms. The physical form of a sample can affect how easily it can be charged into the barrel, so this is a useful contextual field.


Is the material filled or reinforced (for example with glass fibre, mineral filler or carbon)? is a particularly important question because fillers and reinforcements can change how a polymer flows, and the follow-up multiple-choice list identifies the filler types present. The confirmation checkbox in the no-branch provides a clean affirmative record of a neat resin.


Which additives or modifiers are declared for this material? captures formulation context without over-specifying. The inclusion of options such as “No additives declared” and “Not known” is a practical touch, because the operator often only has the declared composition to work from.


The optional photograph of the sample and its label and material datasheet, certificate of analysis or submission form attachment fields add useful visual and documentary evidence without imposing an extra burden on the user.


Material Specification and Acceptance Expectations

Placing the specification questions before the test conditions is a good structural decision, because it prompts the operator to consider the acceptance context before running the test.


Is there a material specification, datasheet value or customer requirement for the melt flow rate of this sample? is a sensible gating question. The follow-up for a specification reference and the subsequent optional fields for the specified value, tolerance and stated conditions give the form everything needed for a later comparison against the recorded result.


Does the specification require a particular conditioning or drying step before testing? prompts the operator to consider preparation requirements that might otherwise be overlooked, and the free-text follow-up lets them summarise the steps in their own words.


Reference method or procedure used for this test records the procedural basis for the work. The branching follow-ups for internal procedures and cited method documents capture reference detail only where it exists.


Test Equipment and Instrument Details

This section demonstrates an emphasis on traceability and measurement confidence.


Type of melt flow test apparatus used distinguishes between manual, semi-automatic and automatic arrangements, which is relevant because the way extrudate is cut and weighed differs between them. The follow-up questions for automatic mass measurement and non-standard arrangements collect useful specifics.


Instrument make and model, Instrument asset/serial number and Balance or scale identification and readability together provide the equipment trail needed to relate a result to a particular instrument and weighing device at a later date.


Was the balance checked with a reference weight on the day of testing? and Was the temperature indication of the apparatus verified before the test? both invite an honest record of what was and was not verified, and both have follow-ups that capture either the verification details or the reason and any known risk. This is a balanced, non-judgemental design that encourages accurate reporting rather than optimistic answers.


The optional Most recent calibration or service date of the melt flow apparatus and Any known limitations, faults or notes about the equipment on the day fields round out the equipment context nicely.


Die, Cylinder and Piston Configuration

Because die geometry directly influences the reported flow value, this section is well placed.


Die identification or reference number, Die bore diameter (mm) and Die land length (mm) capture the core geometry. The optional cylinder bore and piston diameter fields extend the description for laboratories that record them.


Condition of the die bore and land with its follow-up for damage, and Was the die cleaned before this test? with its cleaning-method follow-up, capture maintenance context that can help explain an outlier result.


Was any release agent or lubricant used on the die, cylinder or piston? is a thoughtful inclusion, since such substances can influence flow behaviour, and the no-branch confirmation checkbox provides a clean negative record.


Test Conditions: Temperature, Load and Timing

This is the operational heart of the form and it is laid out clearly.


Set test temperature (°C) and Actual temperature observed during the test (°C) are distinguished from each other, which is good practice, because the difference between set-point and observed value is often where interpretive value lies. The optional Allowed temperature variation from set-point (± °C) field supports tolerance discussion.


Temperature units and scale used for reporting removes ambiguity in reporting, even though degrees Celsius is offered first and is a common convention in this context.


Was the barrel allowed to stabilise at the set temperature before charging the sample? addresses a common source of variability, and its follow-ups capture either the stabilisation time or an explanation of how temperature was managed.


Nominal applied load (kg) is the core load variable, and the optional Applied load expressed in newtons (N) and Piston mass (g), if recorded separately fields accommodate different procedural conventions. Load composition on the piston clarifies how the total load is assembled, with a follow-up to list individual weights where relevant.


Test duration or cut-off time for the timed extrusion segment (s) records the interval used, and Was the same test duration used for every repeat measurement? captures whether intervals were uniform, with a follow-up for varied intervals. The optional Atmosphere around the instrument field is a light-touch environmental note.


Sample Preparation, Conditioning and Charging

Preparation variability is a frequent contributor to inconsistent flow results, so this section adds real value.


Was the sample dried or conditioned before testing? is the gating question here, with follow-ups that either capture the conditioning parameters or the reason no conditioning was applied. This is operationally relevant for moisture-sensitive material families.


Total sample mass charged into the barrel (g), Number of charge increments used to fill the barrel and Method used to fill and settle the sample in the barrel describe the charging technique, which can affect how consistently the barrel is filled between runs.


Pre-heat time after charging, before the load was applied and Was the sample compacted to remove trapped air before the run? address two further common variability sources, with a useful follow-up asking whether air removal was considered effective.


Additional notes on sample preparation gives the operator room to describe anything unusual, such as pellet cutting or blending of regrind.


Test Procedure and Sequence of Events

Step-by-step summary of the procedure followed is a strong design element because it produces a narrative record that another operator could follow. Requiring this field is proportionate, since a results record without any description of what was actually done is difficult to interpret later.


Which procedural steps were carried out during this test? provides a structured checklist alongside the narrative, with follow-ups for warm-weighing corrections and second-operator verification. Was any part of the standard sequence modified or adapted for this material? captures deviations honestly, with a confirmation checkbox when no deviations occurred.


The optional Start time of the test run and End time of the test run fields support duration tracking where it is useful.


Measurement Calculations

The inclusion of the reference relationship in rendered notation is a helpful touch, and the accompanying explanation of the terms (mass, time and the ten-minute conversion factor) makes the calculation transparent. The note that different procedures may use different conventions is appropriately cautious.


Timed segment duration used in the calculation, t (s), Extruded mass for the primary result, m (g, 3 decimal places) and Melt flow rate calculated by the operator (g/10 min) capture the inputs and the reported outcome, while Number of decimal places used when reporting the result standardises the presentation of the value.


Repeat Measurements and Results Table

The results table is the centrepiece of the data collection. Its columns cover measurement number, cut time, extruded mass, a calculated MFR column with an explicit formula, extrudate appearance and an include-in-average checkbox. The formula column removes manual arithmetic effort, and the instruction to check calculated values against the operator's own working is a sensible safeguard.


Number of valid repeat measurements included and Average melt flow rate (g/10 min) record the headline outcome, while the optional Lowest individual result, Highest individual result, Spread between highest and lowest result and Standard deviation of the repeat results fields describe the dispersion of the repeats.


Which value is reported as the final result? makes the reporting basis explicit rather than assumed, with a follow-up for unusual bases. Did the repeat results agree within the spread your laboratory normally expects for this type of material? invites an honest consistency assessment with either a rating or a free-text explanation of the variation.


Extrudate Observations and Anomalies

Which features were observed during extrusion? offers a broad checklist of qualitative observations (surface texture, swelling, break-up, bubbles, discoloration, gels, volatiles, odour and drooling) with follow-ups for how break-up affected the measurement and a description of any colour change. Qualitative observations are often what explain an unexpected number, so this section complements the quantitative results well.


Was any measurement repeated because of an anomaly?, the free-text observations field and the optional photograph of the extrudate strands provide the context needed to interpret unusual runs.


Environmental and Ancillary Conditions

Ambient temperature in the test area (°C) and Relative humidity in the test area (%) are modest but useful context fields. Was the instrument located away from draughts, direct sunlight or vibration sources? and Other instruments or equipment running nearby capture situational factors that can help when results are compared across days or sites. The section introduction correctly notes that ambient conditions usually have limited influence on this type of test, which sets proportionate expectations.


Result Review and Outcome

Outcome against the recorded specification or target closes the loop opened in the specification section, with conditional follow-ups for high results, low results and results near a limit. Is further testing recommended (for example a re-test, additional temperatures or additional loads)? supports a practical next-step decision, and Was the result compared with a previous result for the same material or grade? encourages trend thinking. The closing Interpretation or comments field invites neutral, contextual commentary.


Operator Declaration and Sign-off

The declaration text is clear about what signing means, and the request to identify estimated or assumed values elsewhere in the record is a good accountability prompt. Operator name, Date of sign-off, the confirmation checkbox and the Operator signature form a conventional and proportionate sign-off block. The optional reviewer fields accommodate organisations that operate a review step without imposing one on those that do not.


Optional Feedback on this Form

Ending with an optional, clearly non-impacting feedback block is a user-friendly choice. The emotion rating, coverage rating and suggestion field give the form owner a route to iterative improvement without burdening the test record itself.


Data Collection Implications

Taken together, the fields in this form produce a record that combines quantitative measurements (temperature, load, time, mass and calculated flow rate) with qualitative observations and procedural narrative. This mix is well suited to later comparison between batches, instruments or sites, because the conditions under which each number was obtained are described alongside the number itself. The repeated emphasis on traceability (sample identifier, instrument identification, die reference, balance identification and operator name) means each record can be related back to its physical and human origins.


From a data quality perspective, the use of numeric field types for dimensional and measurement values, structured choice lists for categorical attributes and conditional follow-ups for material-specific detail all reduce the chance of ambiguous or free-form entries in critical fields. The automatic calculation column in the results table further reduces arithmetic transcription errors.


From a basic privacy perspective, the form collects a limited amount of personal information (operator name, and optionally a reviewer name and signatures). The remainder of the record is technical data. Organisations using this form may wish to consider how operator names and signatures are stored and retained in line with their own internal handling practices for laboratory records.


User Experience Considerations

The form is long, but its length is broadly proportionate to the subject matter: a melt flow test genuinely involves equipment, geometry, conditioning, procedure and calculation detail. The use of clearly titled sections and short introductory paragraphs at the start of each section helps the operator understand why a block of questions is being asked and reduces the feeling of a wall of fields.


The conditional follow-ups are the form's strongest usability feature from the respondent's perspective, because they keep irrelevant detail out of view. A respondent testing unfilled polyethylene granules, for example, will not be asked about glass fibre types or PET drying conditions.


The main friction point to be aware of is the number of required fields (thirty in total) distributed across the full length of the form. In practice, an operator may not be able to answer every required question until the test is complete (for example the extruded mass and average flow rate), so the form may need to be completed in stages or saved and revisited. Placeholders and example values throughout the form are excellent and noticeably reduce the effort of interpreting what is wanted.


Minor points worth noting: the sample appearance column in the results table expects free text, which is flexible but could vary in detail between operators; and the calculation relationship is shown for reference rather than applied automatically to the primary result field, so the operator is expected to compute that value themselves. Both are reasonable design choices but worth keeping in mind when comparing records across operators.


Overall Summary

This is a well-structured and thorough laboratory worksheet that mirrors the real sequence of a melt flow index test and captures the full context needed to interpret a reported flow rate. Its principal strengths are the logical section order, the careful distinction between set and observed values, the conditional follow-ups that tailor the form to the material being tested, the transparent presentation of the calculation relationship and the built-in results table with automatic calculation. The traceability chain from sample identifier through instrument and die identification to operator sign-off is complete and clearly articulated. Areas worth considering for refinement include the volume of mandatory fields relative to the points in the workflow at which the information becomes available, and the possibility of pre-populating or auto-calculating the primary result field from the table values to reduce duplicate entry. Overall, the form balances depth of technical record against clarity of layout effectively, and should produce records that are considerably easier to interpret and compare than unstructured notes.


Mandatory Question Analysis for Melt Flow Index (MFR) Testing Form – Thermoplastic Material Characterization

Important Note:

This section explains why certain fields in this form are marked as required and provides general guidance on how these requirements may support the collection of complete, accurate and relevant information.

Required fields and information-collection obligations may vary depending on your industry, jurisdiction, business operations and intended use of the form. A field marked as required in this template does not necessarily mean that collecting the information is legally mandatory.

Please review each required field to determine whether it is necessary, appropriate and lawful for your particular purpose. Consider applicable privacy, data protection, consent and industry-specific requirements, and consult an appropriately qualified legal, privacy or compliance professional where necessary.

Please delete this section before publishing your form. See our Terms of Service for further information.


Analysis of Currently Mandatory Questions

Date this record was started
Recommendation: Requiring the start date anchors the record in time and supports later sequencing, retention and reconciliation with other laboratory documentation. It is a low-effort field to complete at the outset and its necessity is broadly consistent with how technical records are typically organised. Form administrators should confirm whether a date alone is sufficient or whether a combined date-and-time entry better suits their record retrieval practices.


Laboratory, department or site name
Recommendation: Requiring the site or department name supports attribution of the work and helps distinguish records created in different locations, which is useful when results are later compared across sites. The requirement is proportionate for a record intended to travel between teams. If the form is only ever used within a single location, this field could reasonably be pre-filled or made optional to reduce input effort.


Sample ID/sample number
Recommendation: Requiring the sample identifier maintains the essential link between this record and the physical material tested. Without it, the technical data in the remainder of the form cannot reliably be associated with a particular submission. This is one of the most clearly justified mandatory fields in the form and its placement early in the sequence is appropriate.


Polymer family (base resin type)
Recommendation: Requiring the polymer family ensures that the result is interpreted in the correct material context, since flow behaviour varies considerably between families and certain follow-up questions only apply to specific types. Making this field required supports the conditional logic that follows. The list includes an “Other or not listed” option with a free-text follow-up, so respondents with uncommon materials are not blocked.


Is the material filled or reinforced (for example with glass fibre, mineral filler or carbon)?
Recommendation: Requiring this question captures whether the sample is a neat resin or a compounded material, which is operationally relevant to how the flow result is interpreted and compared. It also gates the filler-type follow-up list. The requirement is reasonable for a general material characterisation record; if the form is used exclusively for unfilled resins, the field could be simplified or pre-answered.


Is there a material specification, datasheet value or customer requirement for the melt flow rate of this sample?
Recommendation: Requiring this gating question makes explicit whether the result will be judged against a defined target or reported without comparison. It supports downstream decision-making and prevents assumptions being made later about acceptance status. Because the field accepts a “No” answer and does not force the entry of specification details, it does not create an unreasonable barrier.


Type of melt flow test apparatus used
Recommendation: Requiring the apparatus type establishes how the extrudate was cut and weighed, which varies between manual, semi-automatic and automatic arrangements. This contextual detail helps anyone reviewing the record to understand the measurement approach taken. The multi-option list with an “Other” follow-up covers a wide range of setups.


Instrument make and model
Recommendation: Requiring the instrument make and model supports traceability of the result to a specific piece of equipment, which is useful when investigating variation or reviewing historical data. It is a short text field and the effort to complete it is minimal. Organisations with a fixed instrument fleet could consider pre-populating this value.


Instrument asset/serial number
Recommendation: Requiring the asset or serial number provides a finer level of equipment identification than make and model alone, supporting internal equipment register matching. Together with the make and model field it forms a clear equipment trail. The requirement is proportionate where asset tracking is in place; where it is not, a short note in the form guidance could clarify what to enter.


Balance or scale identification and readability
Recommendation: Requiring the balance identification and readability captures the weighing capability used for the extruded mass, which directly affects the reported flow value. Recording readability alongside the identifier gives reviewers an immediate sense of measurement resolution. This field supports consistent interpretation of the mass figures entered later in the form.


Was the temperature indication of the apparatus verified before the test?
Recommendation: Requiring this question records whether a temperature check was performed, which supports an honest account of the conditions under which the result was obtained. The conditional follow-ups capture either the verification method or the reason a check was not carried out. The requirement supports data completeness for a measurement strongly dependent on temperature, while allowing respondents to answer “No” without being blocked.


Die identification or reference number
Recommendation: Requiring the die reference links the result to the specific die fitted during the test, which is operationally relevant because die geometry influences the reported flow value. It is a short, low-effort field that meaningfully improves record traceability.


Die bore diameter (mm)
Recommendation: Requiring the die bore diameter captures a core geometric parameter that affects the reported result. The numeric field type reduces ambiguity in units and format. Its necessity depends on the level of dimensional detail the form creator wishes to record; where die dimensions are fixed by a standard arrangement, this could be pre-filled.


Die land length (mm)
Recommendation: Requiring the die land length complements the bore diameter and completes the primary die geometry description. Together these two fields support comparability between records produced with different dies. As with the bore diameter, the requirement is most valuable where multiple die configurations are in use.


Set test temperature (°C)
Recommendation: Requiring the set-point temperature records one of the two principal test variables alongside load. It is essential context for interpreting the reported flow rate and comparing results between runs. The numeric field type and explicit unit in the label make the expected entry clear.


Actual temperature observed during the test (°C)
Recommendation: Requiring the observed temperature, in addition to the set-point, captures the difference between intended and actual conditions, which is often where useful interpretive value lies. Requiring both fields is a reasonable design choice for a technical record, though form administrators should consider whether occasional circumstances make an observed value difficult to record and whether a short explanatory note field would help in those cases.


Was the barrel allowed to stabilise at the set temperature before charging the sample?
Recommendation: Requiring this question captures a preparatory step that can influence result consistency. The follow-ups record either the stabilisation time or an explanation of how temperature was managed, giving reviewers useful context. Because a “No” answer is accepted and explained, the requirement does not assume a particular procedure was followed.


Nominal applied load (kg)
Recommendation: Requiring the applied load captures the second principal test variable and is necessary for the result to be meaningfully interpreted or compared. The numeric field type and unit in the label support consistent entry. This is among the most clearly justified mandatory fields in the form.


Test duration or cut-off time for the timed extrusion segment (s)
Recommendation: Requiring the timed segment duration captures the interval over which extruded mass was collected, which forms part of the flow rate calculation. Recording it here as a general test condition supports completeness even before the calculation section is reached.


Was the sample dried or conditioned before testing?
Recommendation: Requiring this question records whether a conditioning step was applied, which is operationally relevant for materials sensitive to moisture or thermal history. The conditional follow-ups either capture the conditioning parameters or the reason none were applied. The requirement supports a complete preparation record without assuming that conditioning is always necessary.


Step-by-step summary of the procedure followed
Recommendation: Requiring a procedural narrative ensures the record describes what was actually done, not only what was measured. This is valuable for anyone reviewing or repeating the work at a later date. The free-text format is appropriate here because procedures vary between laboratories, though a longer mandatory narrative field can add completion time; a structured checklist earlier in the same section partly offsets this.


Timed segment duration used in the calculation, t (s)
Recommendation: Requiring the calculation segment duration makes the basis of the reported value explicit and allows the arithmetic to be checked independently. Although this duplicates information recorded in the test conditions section, it anchors the calculation inputs directly alongside the result, which supports verification.


Extruded mass for the primary result, m (g, 3 decimal places)
Recommendation: Requiring the extruded mass captures the direct measurement from which the flow rate is derived. Specifying three decimal places in the label sets a clear expectation for recording resolution. This field is central to the quantitative output of the form.


Melt flow rate calculated by the operator (g/10 min)
Recommendation: Requiring the operator-calculated flow rate captures the value as computed and checked by the person performing the test. Keeping this alongside the automatically calculated table values supports cross-checking between manual and formula-derived results. Form administrators may wish to consider whether this value could be derived automatically from the inputs to reduce duplicate entry.


Number of valid repeat measurements included
Recommendation: Requiring the count of valid repeats makes explicit how many measurements contribute to the reported outcome, which is important when results are later compared or reviewed. It is a short numeric field and its requirement is proportionate.


Average melt flow rate (g/10 min)
Recommendation: Requiring the average flow rate captures the headline reported outcome of the test in one place, supporting quick retrieval of the result. It forms the natural conclusion of the results table. As with the primary calculation field, pre-population from the table values could reduce manual re-entry.


Operator name
Recommendation: Requiring the operator name supports accountability and traceability of who performed the work, which is standard practice for laboratory records of this type. It is a brief text field. Organisations should consider how names and any associated signatures are stored and retained in line with their own internal record-handling practices.


Date of sign-off
Recommendation: Requiring the sign-off date records when the record was reviewed and confirmed as complete, supporting the chronological integrity of the file. It is a low-effort field and its placement at the end of the form is appropriate.


I confirm the information recorded in this form is complete and accurate to the best of my knowledge
Recommendation: Requiring this confirmation checkbox creates an explicit acknowledgement step that the entries reflect the work actually performed. It supports a clear audit trail and encourages careful review before submission. The wording appropriately frames the confirmation as a statement of the operator's knowledge rather than a guarantee of objective accuracy.


Operator signature
Recommendation: Requiring the operator signature provides a formal sign-off that the record has been reviewed and accepted by the person who performed the test. It complements the printed name and sign-off date fields. Form administrators should confirm that a signature capture method consistent with their documentation practices is available in the intended deployment environment.


Overall Mandatory Field Strategy

The form currently contains thirty mandatory fields distributed across nearly every section, from administrative identification through equipment, test conditions, calculation and sign-off. The selection is broadly coherent: required fields concentrate on traceability (date, site, sample identifier, instrument and die identification, operator name), the principal test variables (temperature, load, duration), the measurement inputs and outputs (extruded mass, calculated and average flow rate) and the sign-off block. Optional fields are generally reserved for supplementary context, environmental notes and comparison statistics, which is a sensible division.


Balance between data depth and completion effort. The volume of required fields is substantial but proportionate to the technical subject matter. The main consideration is when each piece of information becomes available during the workflow: several required fields (extruded mass, average flow rate, operator sign-off) cannot be answered until the test is complete, while others are known at the outset. Where practical, supporting a save-and-resume workflow, or clearly signalling which fields belong to the pre-test, during-test and post-test phases, would reduce the risk of an operator reaching the end of a long form and discovering they cannot submit without information they have not yet generated.


Use of conditional logic. The form already makes effective use of branching follow-ups (polymer family variants, filler types, drying history, apparatus type, load composition and outcome status). This is the right approach to keep mandatory fields from becoming excessive: only relevant follow-ups appear, and several of the required gating questions (filled/reinforced status, specification availability, drying or conditioning, barrel stabilisation) work precisely because they unlock context-specific detail. Extending this pattern to fields such as the specification tolerance and conditioning steps, which currently appear unconditionally, could further streamline the experience for tests where no formal specification applies.


Placement and general best practices. The placement of required fields follows the natural order of the work, which is helpful: the operator is not asked for end-of-test data at the beginning. Keeping mandatory markers visually consistent and, where possible, grouping required fields at the start of each section rather than scattering them, can help respondents plan their effort. The use of clear placeholders and worked examples next to required fields is a notable strength and should be retained. Finally, it may be worth reviewing the calculation inputs (segment duration and extruded mass) against the results table, since some values are entered more than once; if the form platform allows it, deriving one from the other would reduce both effort and the chance of transcription mismatch.


Think we can add some secret agent vibes to this form template? Edit this Melt Flow Index Testing Form | MFR and MVR Test Record
Need a form that automatically calculates totals or other values? Zapof allows you to create tables with built-in calculations, just like a spreadsheet.
This form is protected by Google reCAPTCHA. Privacy - Terms.
 
Powered by Zapof