Identify Polymer Types and Assess Plastic Material Composition

1. Sample Identification and Submission Details

Please complete every field that applies to the sample. Clear sample identification and traceable submission details make the assessment easier to review, repeat and compare with future results.


Sample ID or laboratory reference number

Additional batch, lot or order codes

Submitted by or requester name

Organisation, department or site

Contact email address

Date sample received

Date analysis started


Number of specimens submitted

Sample form as received



Product description

Intended use or function of the product

Manufacturer, supplier or source (if known)

Colour as received

Opacity of the sample

Is the sample a multi-material assembly or does it contain non-plastic components?


2. Sample History, Processing and Service Context

Background information about how the material was made and used helps interpret the analytical data. Fill in what is known and mark the remainder as unknown rather than guessing.


Primary processing method (if known)


Has the material been previously processed or reprocessed, for example using regrind or recycled content?


Estimated service life before sampling (months)

Date or period of manufacture (if known)

Known exposure history (select all that apply)


Was the sample cleaned or washed before submission?


Do you have the original material data sheet or supplier specification for this sample?


3. Preliminary Non-Destructive Observations

These informal observations are useful screening clues only. They can suggest a likely material family, but they should be confirmed by instrumental analysis before any firm conclusion is drawn.


Surface and visual observations (select all that apply)



Colour of the sample core or cross-section

Surface hardness impression (informal scratch or feel test)

Flexibility or rigidity impression

Does the sample emit a characteristic odour when gently warmed?


Was a simple flame or burn test performed on a small specimen?



Water immersion observation (float or sink)

Any other physical observations

4. Density and Physical Measurements

Density is one of the most useful screening properties for plastics, although fillers, reinforcement, foaming and crystallinity can shift the value considerably. Record the measurement method and temperature alongside the result.


Density and specific gravity relationships

ρ=mVSG=ρsampleρreferenceρwater≈0.997 g⋅cm−3 at 25∘C\rho = \frac{m}{V} \qquad SG = \frac{\rho_{sample}}{\rho_{reference}} \qquad \rho_{water} \approx 0.997 \ \mathrm{g \cdot cm^{-3}} \ \text{at} \ 25^{\circ}\mathrm{C}


Was density or specific gravity measured on this sample?


Measured density (g/cm3)

Test temperature (degrees Celsius)


Melt mass-flow rate (g/10 min)

Test conditions used for the melt flow measurement

Moisture content as received (%)

Was the sample dried before testing?


Physical property measurement log

Property measured

Method used

Test temperature (degrees Celsius)

Measured value

Units

Expected value

Deviation

Within expected range?

Density
Hydrostatic balance
23.0
0.9520
g/cm3
0.9500
0.0020
Melt mass-flow rate
Extrusion plastometer
190.0
4.2000
g/10 min
4.0000
0.2000
Moisture content
Loss on drying
105.0
0.0800
%
0.1000
-0.0200
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

5. Identification Methods and Instrumental Analysis

Recording which methods were applied, and how they were applied, allows the identification to be reviewed and repeated. Where possible, combine methods that provide different kinds of evidence rather than relying on a single measurement.


Methods applied to this sample (select all that apply)



Instrument make and model

Operator or analyst who performed the measurements

Date of instrumental analysis

Reference library or comparison dataset used for matching

Highest match score obtained (%)

Was a reference standard or control material analysed alongside the unknown sample?


Were repeat measurements taken on the same specimen?


Please upload spectra, thermograms or instrument reports supporting this assessment

Choose a file or drop it here
 

6. Characteristic Peaks and Spectral Data Log

List the bands or peaks that carry the most diagnostic value for the identification. Focus on well-resolved features and record what each one is thought to represent, together with any feature that conflicts with the working hypothesis.


Characteristic peak log

Peak position (cm-1)

Relative intensity (1 = very weak, 5 = very strong)

Bond or vibration assignment

Functional group or species

Diagnostic feature?

Notes and interpretation

2920.0
 
C-H stretching vibration
Alkyl group
Strong, sharp band typical of hydrocarbon backbone
1740.0
 
C=O stretching vibration
Carbonyl or ester
Strong sharp band used as a key marker
1240.0
 
C-O stretching vibration
Ester group
Medium intensity, supports the ester assignment
3350.0
 
O-H or N-H stretching
Hydroxyl or amine
Broad band, may also reflect absorbed moisture
720.0
 
CH2 rocking vibration
Long methylene sequence
Weak band, consistent with a linear chain segment
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Peaks or bands that were absent but would have been expected

Peaks that could not be assigned with confidence

7. Melting and Thermal Behaviour

Melting behaviour, glass transition and decomposition profile provide complementary evidence to spectroscopy. Record both the raw values and how they were interpreted, since additives and recycled content can broaden or shift thermal transitions.


Observed melting behaviour during heating



Melting peak temperature (degrees Celsius)

Melting onset temperature (degrees Celsius)

Crystallisation temperature on cooling (degrees Celsius)

Glass transition temperature (degrees Celsius)

Estimated enthalpy of fusion (J/g)

Estimated degree of crystallinity (%)


Onset of thermal decomposition (degrees Celsius)

Residual mass at the end of the test (%)

Did the sample show evidence of more than one polymer phase?


Did the thermal data show any unexpected or anomalous features?


Please rate how strongly each thermal observation supports the final identification

Strongly contradicts

Somewhat contradicts

Neutral or unclear

Somewhat supports

Strongly supports

Melting peak position

Melting peak shape and width

Crystallisation behaviour on cooling

Glass transition measurement

Decomposition profile

Residual ash or filler content

Overall consistency of the thermal data

Thermal analysis data log

Technique and run

Sample mass (mg)

Onset temperature (degrees Celsius)

Peak temperature (degrees Celsius)

Enthalpy (J/g)

Observed transition

Interpretation notes

Heating run 1
8.40
122.5
131.8
142.6
Melting endotherm
Single sharp peak, consistent with a semi-crystalline material
Cooling run
8.40
115.0
112.3
0.0
Crystallisation exotherm
Narrow exotherm on cooling, indicating a regular structure
Thermogravimetric run 1
12.10
385.0
445.2
0.0
Single-step decomposition
Residual mass 1.2 percent at the end of the run
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

8. Material Identification Result

This section records the expected material, the material identified from the evidence gathered, and how confident the assessment is. Where the evidence is incomplete, state this plainly rather than forcing a conclusion.


Expected polymer as stated on the request or specification


Material identification result



Polymer grade, sub-type or designation resolved

Does the identified material match the expected polymer?


Is the material believed to be a blend, alloy or multi-layer structure?


Confidence level in the identification result

Overall match confidence (%)

Estimated filler or reinforcement content (% by mass)

Basis for the identification conclusion

Alternative hypotheses considered and why they were set aside

Recommended confirmatory testing, if any

9. Suspected Additives, Fillers and Contaminants

Additives are present in most practical plastic materials and can strongly influence the analytical response. Record what is suspected and the evidence for the suspicion, keeping observation separate from interpretation.


Suspected additives (select all that apply)




Was elemental screening performed to support the additive assessment?


Ash or inorganic residue after ignition (% by mass)

Appearance of the residue after ignition

Are any substances of concern suspected to be present in the material?


Please note: this form records observations and analytical results only. It does not determine the regulatory status of any substance or product. Where a substance of concern is suspected, arrange appropriate specialist testing and review the requirements that apply to your product and market.


Additional comments on additives or formulation

10. Contamination, Degradation and Foreign Material

Degradation and contamination can shift both spectral and thermal results. Recording them helps explain unexpected values and supports decisions about re-testing or rejection.


Signs of degradation or contamination observed (select all that apply)


Is the sample suspected to be out of specification?


Was the sample surface cleaned or abraded before analysis to remove surface contamination?


Any additional observations on contamination or degradation

11. Consistency Checks, Uncertainty and Limitations

A transparent statement of what supports the result and what limits it makes the assessment far more useful to anyone who reads it later.


Please indicate how consistent each data source is with the final identification

Not applicable

Inconsistent

Weakly consistent

Consistent

Strongly consistent

Visual and physical observations

Density measurement

Spectroscopic data

Thermal data

Elemental screening

Supplier documentation

Sample history and processing information

Are the results reproducible across repeat measurements?


Limitations affecting this assessment (select all that apply)


Additional comments on uncertainty or limitations

12. Recommended Follow-Up Actions

Use this section to record what should happen next, so that the assessment can be completed or confirmed in a planned way.


Please rank the following follow-up actions in order of priority

Repeat spectroscopic analysis on a freshly cleaned or cut surface

Run complementary thermal analysis

Perform elemental screening

Request supplier material documentation

Analyse a second, independent specimen

Compare against a known reference material

Refer to an external specialist laboratory

No further action required

Is further testing recommended?


Target completion date for follow-up work

Estimated additional testing cost (in your local currency)

Who should receive the final outcome?


13. Declaration and Sign-Off

Please review the entries above before signing. The identification reflects the methods listed and the condition of the sample at the time of testing.


Analyst name

Reviewer or approver name

Laboratory, team or organisation

Date of report

I confirm that the observations and data recorded in this form reflect the work performed and the results obtained.

I understand that the identification result is based on the methods listed and may require confirmatory testing before it is relied upon for any decision.

Analyst signature

Reviewer signature

Final remarks

Analysis for Polymer & Plastic Identification Form — Sample Composition and Material Assessment Worksheet

Important Note:

This analysis provides strategic insights to help you get the most from your form's submission data for powerful follow-up actions and better outcomes.

AI-Generated Content: This template and its accompanying guidance are AI-generated to provide a practical starting point for your form-building needs. Please review and customise the content to ensure it is accurate, appropriate and suitable for your intended use.

This guide is provided for general informational and planning purposes only. It does not constitute professional, legal, financial, medical, employment, privacy, regulatory, or advice of any other kind, nor does it certify that this template is suitable or compliant for any particular jurisdiction or purpose.

Laws, regulations, industry practices and business requirements vary. You are responsible for reviewing and customising the template to suit your intended use and obtaining advice from appropriately qualified professionals where necessary.

Please delete this section before publishing your form. See our Terms of Service for further information.



Overall Form Analysis

This Polymer & Plastic Identification Form is a comprehensive and well-structured worksheet designed to capture sample details, analytical observations, instrumental data and identification conclusions for plastic raw materials and finished products. The form is organised into thirteen logically sequenced sections that follow the natural workflow of a material identification exercise — from initial sample receipt and descriptive observations through instrumental analysis, data interpretation and final sign-off. The overall design demonstrates a strong emphasis on traceability, method documentation and transparent reporting of uncertainty, which are key operational strengths for any material assessment workflow.


Section: Sample Identification and Submission Details

This opening section establishes the administrative foundation of the assessment. It captures who submitted the sample, what the sample is, and how it was received — all essential for maintaining a clear chain of custody and enabling future reference or comparison.


Sample ID or laboratory reference number — This field serves as the primary unique identifier for the sample throughout the assessment process. A clear, consistent reference number is operationally important for linking this form to laboratory records, storage locations and any subsequent reports. The placeholder example provides helpful formatting guidance.


Additional batch, lot or order codes — Capturing supplementary traceability codes supports supply-chain linking and allows the assessment to be connected to specific production runs or purchase orders. The option to leave this blank when not applicable is a sensible usability choice.


Submitted by or requester name — Recording the requester ensures that the assessment can be attributed and that follow-up communication can be directed to the correct person.


Organisation, department or site — This contextualises the request and helps the analyst understand the operational setting in which the sample originates.


Contact email address — A contact channel enables the analyst to seek clarification or share results. The placeholder example is clear and helpful.


Date sample received and Date analysis started — These date fields support turnaround tracking and help establish whether any time-dependent changes (such as moisture uptake or surface contamination) may have occurred between receipt and testing.


Number of specimens submitted — Knowing the quantity of specimens available informs whether repeat or confirmatory testing is feasible.


Sample form as received — This single-choice field with thirteen options (plus follow-up text fields for specific selections) is an effective way to capture the physical form of the sample. The conditional follow-ups for moulded parts, adhesives and other forms demonstrate thoughtful design that collects detail only when relevant.


Product description — A free-text description provides the analyst with essential context about the material's appearance, intended processing route and any notable features. The placeholder example is practical and instructive.


Intended use or function of the product — Understanding the application helps the analyst interpret results in context and identify any performance-relevant considerations.


Manufacturer, supplier or source (if known) — When available, this information can narrow the likely material family and support comparison against supplier specifications.


Colour as received and Opacity of the sample — These basic visual descriptors are inexpensive to record and can provide useful screening clues, particularly for distinguishing between common polymer families.


Is the sample a multi-material assembly or does it contain non-plastic components? — This yes/no question with a conditional multiple-choice follow-up is well designed to flag samples that may require special handling or disassembly before analysis. The list of non-plastic component types is comprehensive and practical.


Section: Sample History, Processing and Service Context

Background information about processing and service conditions helps interpret analytical data correctly. The section's introductory paragraph wisely encourages users to mark unknowns rather than guess, promoting data quality.


Primary processing method (if known) — This single-choice field with twelve options and conditional follow-ups for additive manufacturing and other methods is well structured. Knowing the processing route can inform expectations about crystallinity, orientation and residual stress.


Has the material been previously processed or reprocessed? — This question with a detailed multiple-choice follow-up is important for understanding whether recycled content or regrind may be present, which can affect both spectral and thermal data.


Estimated service life before sampling (months) — Service duration helps contextualise any degradation observations.


Date or period of manufacture (if known) — When available, this supports comparison against known formulation changes or specification revisions.


Known exposure history — The comprehensive multiple-choice list covering ultraviolet, temperature, chemical, mechanical and other exposures is a strong feature. The conditional follow-ups for chemical contact and food contact add useful specificity.


Was the sample cleaned or washed before submission? — This question with a conditional follow-up helps the analyst understand whether surface contamination may have been removed or introduced.


Do you have the original material data sheet or supplier specification? — The conditional file upload is an effective way to collect supporting documentation when available.


Section: Preliminary Non-Destructive Observations

This section captures informal screening observations that can suggest likely material families. The introductory paragraph appropriately notes that these observations should be confirmed by instrumental analysis — a responsible framing that avoids over-reliance on informal tests.


Surface and visual observations — The fourteen-option multiple-choice list with conditional follow-ups for discolouration, reinforcement type and layered structures is thorough and well designed. It captures a wide range of visual features relevant to polymer assessment.


Colour of the sample core or cross-section — Comparing core and surface colour can reveal surface treatments, coatings or degradation gradients.


Surface hardness impression and Flexibility or rigidity impression — These informal tactile assessments provide quick screening clues and are appropriately labelled as informal.


Does the sample emit a characteristic odour when gently warmed? — The yes/no structure with a nine-option odour description follow-up is a well-designed way to capture this traditional screening observation. The note about handling with care is appropriate.


Was a simple flame or burn test performed? — The detailed multiple-choice follow-up for burning characteristics is comprehensive. The informative paragraph about green-edged flames and halogen-containing species is a helpful, balanced note that avoids overstating the reliability of informal tests. The no-follow-up paragraph encouraging careful handling is also a positive safety touch.


Water immersion observation — A simple density screening observation that can quickly narrow the likely material family.


Any other physical observations — An open-ended field for miscellaneous notes is a practical catch-all.


Section: Density and Physical Measurements

Density is one of the most useful screening properties for plastics, and this section captures it well alongside related physical measurements.


The equation block displaying density and specific gravity relationships with the reference density of water is a helpful visual aid that reinforces the measurement context.


Was density or specific gravity measured on this sample? — The yes/no structure with a method selection follow-up and a no-follow-up paragraph encouraging later addition is well designed.


Measured density, Test temperature, Melt mass-flow rate, Moisture content — These numeric fields with appropriate decimal precision settings are well specified. Capturing test conditions alongside results is good analytical practice.


Was the sample dried before testing? — This conditional question with a drying parameters follow-up is important for moisture-sensitive materials.


The Physical property measurement log table is a well-structured data collection tool with columns for property, method, temperature, measured value, expected value, calculated deviation (using a formula) and a checkbox for within-range confirmation. The pre-populated example rows are instructive and demonstrate the intended use clearly.


Section: Identification Methods and Instrumental Analysis

This section documents which analytical methods were applied and how, enabling the identification to be reviewed and repeated — a key operational strength.


Methods applied to this sample — The comprehensive nineteen-option multiple-choice list with conditional follow-ups for infrared sampling mode, solubility reagents, ash residue and other methods is exceptionally thorough. It covers spectroscopic, thermal, elemental, microscopic and physical methods.


Instrument make and model — Recording instrument details supports method reproducibility.


Operator or analyst who performed the measurements — Attribution of analytical work is important for accountability and follow-up.


Date of instrumental analysis — Supports timeline documentation.


Reference library or comparison dataset used for matching — Documenting the reference source is good practice for spectral matching work.


Highest match score obtained — A quantitative confidence indicator for spectral matching.


Was a reference standard or control material analysed alongside the unknown sample? — This question with a conditional follow-up promotes good analytical practice.


Were repeat measurements taken on the same specimen? — Assessing repeatability strengthens the reliability of the identification.


The file upload for spectra, thermograms and instrument reports is an effective way to collect supporting evidence.


Section: Characteristic Peaks and Spectral Data Log

This section focuses on recording the most diagnostically valuable spectral features.


The Characteristic peak log table is well designed with columns for peak position, relative intensity (using a 1–5 digit rating), bond or vibration assignment, functional group, diagnostic feature checkbox and interpretation notes. The pre-populated example rows are clear and instructive.


Peaks or bands that were absent but would have been expected — Recording expected-but-absent features is a thoughtful addition that supports thorough interpretation.


Peaks that could not be assigned with confidence — This field promotes honest reporting of uncertainty.


Section: Melting and Thermal Behaviour

Thermal data provides complementary evidence to spectroscopy, and this section captures it comprehensively.


Observed melting behaviour during heating — The seven-option single-choice field with conditional follow-ups for multiple peaks, amorphous behaviour and overlapping decomposition is well designed.


The series of numeric thermal property fields (melting peak, melting onset, crystallisation temperature, glass transition, enthalpy of fusion, degree of crystallinity, decomposition onset, residual mass) covers the key thermal parameters with appropriate decimal precision.


Did the sample show evidence of more than one polymer phase? and Did the thermal data show any unexpected or anomalous features? — These yes/no questions with conditional text follow-ups are valuable for capturing interpretive nuances.


The matrix rating for how strongly each thermal observation supports the final identification is an excellent feature that captures the analyst's assessment of evidential weight.


The Thermal analysis data log table with columns for technique, sample mass, onset temperature, peak temperature, enthalpy, observed transition and interpretation notes is well structured with helpful example rows.


Section: Material Identification Result

This is the core output section of the form, and it is well designed to capture the identification conclusion with appropriate nuance.


Expected polymer as stated on the request or specification — The twenty-three-option single-choice list with a conditional follow-up for other materials is comprehensive. Capturing the expected material alongside the identified material supports discrepancy analysis.


Material identification result — The twenty-five-option single-choice list with conditional follow-ups for blends, filler-loaded materials and inconclusive results is thorough. The inclusion of an inconclusive option is a positive design choice that avoids forcing unsupported conclusions.


Polymer grade, sub-type or designation resolved — Capturing sub-type information adds useful specificity when the evidence supports it.


Does the identified material match the expected polymer? — The conditional no-follow-up prompting for discrepancy description is well designed.


Is the material believed to be a blend, alloy or multi-layer structure? — This question with a conditional follow-up is important for complex materials.


Confidence level in the identification result — The five-option scale from very high to not determined is a clear and honest way to communicate assessment certainty.


Overall match confidence (%) — A quantitative confidence measure complements the qualitative scale.


Estimated filler or reinforcement content — Useful when the evidence supports an estimate.


Basis for the identification conclusion and Alternative hypotheses considered and why they were set aside — These fields promote transparent, evidence-based reasoning.


Recommended confirmatory testing, if any — A practical field that connects the assessment to next steps.


Section: Suspected Additives, Fillers and Contaminants

Additives are present in most practical plastic materials and can influence analytical response. This section captures suspected additives comprehensively.


Suspected additives — The twenty-four-option multiple-choice list with conditional follow-ups for plasticiser type, flame retardant class, colourant description, mineral filler content, recycled fraction and other additives is exceptionally thorough.


Was elemental screening performed to support the additive assessment? — The conditional multiple-choice follow-up listing detected elements is well designed.


Ash or inorganic residue after ignition and Appearance of the residue — These fields capture practical data about inorganic content.


Are any substances of concern suspected to be present? — The conditional follow-up is appropriately framed, and the accompanying paragraph correctly notes that the form does not determine regulatory status — a responsible and important disclaimer.


Section: Contamination, Degradation and Foreign Material

This section addresses factors that can affect analytical results.


Signs of degradation or contamination observed — The thirteen-option multiple-choice list with conditional follow-ups for discolouration and foreign polymer contamination is well designed.


Is the sample suspected to be out of specification? — The conditional follow-up for describing the unmet requirement is practical.


Was the sample surface cleaned or abraded before analysis? — Surface preparation documentation supports result interpretation.


Section: Consistency Checks, Uncertainty and Limitations

This section is a notable strength of the form, promoting transparent and honest reporting.


The matrix rating for consistency of each data source with the final identification is an excellent feature that captures the evidential basis of the conclusion.


Are the results reproducible across repeat measurements? — The conditional follow-ups for both yes and no responses are well designed.


Limitations affecting this assessment — The twelve-option multiple-choice list with a conditional follow-up for other limitations is comprehensive and encourages honest assessment of constraints.


Section: Recommended Follow-Up Actions

This section provides a clear mechanism for planning next steps.


The ranking field for follow-up action priorities is a practical tool for resource planning.


Is further testing recommended? — The conditional follow-up for describing recommended tests is useful.


Target completion date and Estimated additional testing cost — These fields support practical planning and budgeting.


Who should receive the final outcome? — The six-option single-choice list with a conditional follow-up for additional recipients is well designed for distribution management.


Section: Declaration and Sign-Off

The sign-off section provides appropriate closure and accountability.


Analyst name and Date of report — Essential attribution fields.


Reviewer or approver name — Supports quality review workflows.


The two checkbox declarations are well worded — the first confirms data accuracy, and the second appropriately acknowledges that the identification is based on the methods listed and may require confirmatory testing. This is a balanced and responsible framing.


The signature fields for analyst and reviewer provide formal sign-off capability.


Final remarks — An open-ended field for any closing observations.


Overall Summary

This form is a well-designed and comprehensive material identification worksheet that covers the full workflow from sample receipt to final sign-off. Its key strengths include: logical section sequencing that mirrors the analytical process; extensive use of conditional follow-ups that collect detail only when relevant; detailed data tables with example rows and calculated fields; strong emphasis on traceability, method documentation and transparent reporting of uncertainty; responsible framing of informal screening observations as preliminary rather than definitive; and clear disclaimers about the scope and limitations of the assessment. The form also demonstrates good usability practices through helpful placeholder examples, clear option lists and informative introductory paragraphs for each section. Potential areas for consideration include the overall length of the form, which may present a significant completion burden — particularly for routine or high-volume assessments — and the possibility of using conditional logic or section-level visibility to streamline completion for simpler cases. Additionally, some sections (such as the preliminary observations and thermal behaviour sections) contain many optional fields that could potentially be grouped or collapsed to reduce visual complexity. Despite these considerations, the form represents a thorough and professionally designed instrument for polymer and plastic material assessment.


Mandatory Question Analysis for Polymer & Plastic Identification Form — Sample Composition and Material Assessment Worksheet

Important Note:

This section explains why certain fields in this form are marked as required and provides general guidance on how these requirements may support the collection of complete, accurate and relevant information.

Required fields and information-collection obligations may vary depending on your industry, jurisdiction, business operations and intended use of the form. A field marked as required in this template does not necessarily mean that collecting the information is legally mandatory.

Please review each required field to determine whether it is necessary, appropriate and lawful for your particular purpose. Consider applicable privacy, data protection, consent and industry-specific requirements, and consult an appropriately qualified legal, privacy or compliance professional where necessary.

Please delete this section before publishing your form. See our Terms of Service for further information.


Mandatory Questions Analysis

Sample ID or laboratory reference number
Recommendation: Requiring this field supports traceability and record-keeping by ensuring every assessment can be uniquely linked to a specific sample. A consistent reference number enables the form to be connected to laboratory records, storage locations and any subsequent reports. The necessity of this field depends on the form creator's record management system, but in most operational contexts a unique identifier is a practical prerequisite for organising assessment data.


Submitted by or requester name
Recommendation: Requiring the requester name ensures that each submission can be attributed to a responsible contact, supporting follow-up communication and accountability. It also helps the analyst understand who to contact if clarification is needed. Form administrators should consider whether capturing a full name or a contact identifier better suits their internal communication and record-keeping practices.


Sample form as received
Recommendation: Requiring this field ensures the physical form of the sample is recorded at the outset, which is operationally important for planning the appropriate analytical approach and for interpreting results in context. The physical form (e.g. pellet, film, moulded part) can influence which methods are applicable and how data should be interpreted. Making this mandatory supports data completeness for the assessment workflow.


Product description
Recommendation: Requiring a product description ensures that the analyst has essential context about the sample's appearance, processing route and any notable features. This descriptive information supports interpretation of analytical data and helps distinguish between samples in a busy laboratory environment. The practical necessity of this field may vary depending on the form creator's workflow, but it generally supports more informed and efficient assessment.


Operator or analyst who performed the measurements
Recommendation: Requiring attribution of the analyst supports accountability and enables follow-up if questions arise about the methodology or results. It also supports quality review workflows where a second person may need to discuss the findings with the original operator. This field is operationally important for maintaining a clear record of who performed the analytical work.


Material identification result
Recommendation: Requiring this field ensures that every completed form includes a stated identification outcome, which is the primary purpose of the assessment. Even an inconclusive result is a valid and useful outcome when the evidence is insufficient. Requiring this field supports data completeness and ensures that the form records a clear conclusion or status. The importance of this field depends on the form creator's intended use, but it is generally central to the form's operational purpose.


Confidence level in the identification result
Recommendation: Requiring a confidence level ensures that the identification result is accompanied by an honest assessment of its certainty. This supports downstream decision-making by helping readers understand how much weight to place on the conclusion. The five-option scale from very high to not determined provides a clear and proportionate way to communicate this. Making this field mandatory promotes transparent and responsible reporting.


Analyst name
Recommendation: Requiring the analyst name in the sign-off section ensures formal attribution of the completed assessment. This supports record-keeping, quality review and accountability. It complements the earlier operator field by confirming who is signing off on the final form. The practical necessity depends on the form creator's sign-off and review processes.


Date of report
Recommendation: Requiring the report date ensures that each completed assessment has a clear timestamp, supporting record-keeping, version tracking and chronological organisation of results. It also helps establish when the identification was concluded, which can be relevant if material specifications or supplier information change over time. This is a practical and generally useful field for maintaining orderly records.


Overall Mandatory Field Strategy Recommendation

The form currently marks nine fields as mandatory, distributed across the sample identification section (four fields), the instrumental analysis section (one field), the material identification result section (two fields) and the declaration section (two fields). This distribution is well balanced — the mandatory fields are concentrated at the beginning of the form (establishing sample identity and context), at the analytical output stage (capturing the result and its confidence) and at the sign-off stage (providing formal attribution and dating).


  • Balancing data depth against completion rates: The form contains a large number of optional fields across thirteen sections. While this breadth supports thorough assessment, it may present a significant completion burden for routine or high-volume cases. Consider whether some sections could be made optional at the section level or collapsed by default to reduce perceived length. The current mandatory field count is proportionate and unlikely to be a barrier to completion on its own.

  • Conditional logic: The form already makes extensive use of conditional follow-ups, which is a strong design choice. Consider extending this principle to entire sections — for example, the thermal behaviour section could be shown only when thermal analysis methods are selected, and the spectral data log could be shown only when spectroscopic methods are applied. This would streamline completion for simpler assessments.

  • Mandatory field selection and placement: The current mandatory fields are sensibly chosen — they capture essential identity, output and accountability information. Placing the first four mandatory fields in the opening section ensures that minimum viable information is collected early. The remaining mandatory fields at the analytical output and sign-off stages are appropriate for their role. Form administrators should periodically review whether any currently optional fields (such as contact email or date of analysis) should be made mandatory based on their specific workflow needs.

  • Overarching observations: The number of mandatory fields (nine out of a very large total field count) is relatively low, which is appropriate for a detailed technical worksheet where many fields are conditionally relevant. This approach supports completion rates while ensuring that core information is always captured. Form creators may wish to consider whether a reduced or streamlined version of the form (with fewer sections and fields) would be useful for routine or preliminary assessments, reserving the full form for complex or high-stakes cases.


This form works plus with Zapof, you get the turbo button! 🏎️ Auto-zooming tables? Vroom. Spreadsheet nitrous? Just say when.
This form is protected by Google reCAPTCHA. Privacy - Terms.
 
Powered by Zapof