Brake Pad Maintenance & Reliable Stopping Power Check

1. Purpose, Scope & Working Notes

This form helps you record what you observe while checking brake pads and related stopping components on bicycles and strollers. It is a practical record-keeping and planning tool only. It does not replace a qualified mechanic's judgement, a manufacturer's instructions, or any local rules that may apply where you live. If anything feels unsafe or unclear, stop using the vehicle and seek hands-on help from a person experienced with that type of brake system.

Tip: work on one vehicle at a time, keep the vehicle stable and supported, and write down what you actually see rather than what you expect to see. Small pad wear differences can change how a brake feels, so it is worth measuring rather than guessing.

 

I understand this form is for record-keeping and planning, and that observations should be confirmed by a person competent with the relevant brake system before relying on the vehicle.

Is the vehicle currently unsafe to push, ride or push while loaded?

 

Please describe what makes it unsafe and how it is currently secured or stored:

 

Where is the vehicle parked for this inspection?

Have you inspected this vehicle with this form before?

 

Approximate date of the previous check:

 

No problem. Take your time, measure each pad where you can reach it, and use the notes fields freely. Photos are especially useful for a first record.

2. Inspector & Session Details

Inspector name

Your role for this inspection

 

Please describe your role:

Contact email or preferred contact method

Inspection date

Inspection start time

Inspection location or setting

Conditions during the check

Approximate distance or use counter reading on the vehicle (if available)

Unit used for the reading above

3. Vehicle Profile & Typical Use

Vehicle nickname or identifier

Vehicle description

 

Typical commute distance and terrain:

 

Approximate combined weight of children and carried items:

 

Rider age range and approximate rider weight:

 

Typical cargo load and how it is carried:

 

Please describe the vehicle:

Make and model (if known)

Year of manufacture or year acquired

Wheel size or rim diameter

How is the vehicle mainly used?

How often is the vehicle used?

Where is the vehicle usually stored?

 

Please describe exposure to rain, damp, salt or dust, and anything you do to protect the brakes:

Has the vehicle been dropped, crashed or involved in any impact recently?

 

Please describe what happened and any damage you noticed near the wheels, levers or brakes:

4. Brake System Identification

Identify the brake system before judging the pads. Different systems wear differently and need different checks, so recording the system first makes the rest of the form much more useful.

 

Primary brake system on this vehicle

 

Fluid type used in the hydraulic system (from the reservoir cap or documentation):

 

Does the cable move freely inside its housing when the lever is squeezed?

 

Do both brake arms return away from the rim when the lever is released?

 

Please describe the brake setup, including any mix of different brake types on the same vehicle:

Does the vehicle have brakes on more than one wheel or more than one track?

 

How many separate brake units are fitted, and do they feel similar to each other?

Pad material currently fitted (mark any that apply)

 

Unknown pads are common on older or second-hand vehicles. Record the wear and feel carefully, and consider replacing with a clearly labelled set so future checks are easier to compare.

Disc rotor diameter (if a disc system), in millimetres

Caliper piston count (if known)

Date the pads were last replaced (if known)

Any previous brake work, upgrades or part changes worth remembering?

5. Brake Pad & Noise Inspection Table

Complete one row per brake unit or per vehicle you are checking. Use the option wording shown in each column heading so records stay consistent over time. Pad wear is easiest to judge with the pad removed or with a clear side-on view and a small ruler or feeler gauge; if you cannot measure it, choose the closest description and note the uncertainty.

 

Brake Pad Condition Overview

Vehicle Description (Commuter Bike/Double Baby Stroller/Kid's Pedal Bike/Cargo Bike)

Brake System (Hydraulic Disc/Mechanical Disc/Rim V-Brake)

Lever Travel Squeeze (Firm/Short Travel, Soft/Touches Handlebar, Spongy)

Pad Wear Remaining (🟢 Thick (>3mm), 🟡 Moderate (1-2mm), 🔴 Critical (<1mm/Metal))

Brake Noise (Silent, High-Pitch Squeal, Grinding Metal)

A
B
C
D
E
1
Commuter Bike
Hydraulic Disc
Firm/Short Travel
🟢 Thick (>3mm)
Silent
2
Double Baby Stroller
Mechanical Disc
Soft/Touches Handlebar
🟡 Moderate (1-2mm)
High-Pitch Squeal
3
Kid's Pedal Bike
Rim V-Brake
Firm/Short Travel
🟡 Moderate (1-2mm)
Silent
4
Cargo Bike
Hydraulic Disc
Spongy
🔴 Critical (<1mm/Metal)
Grinding Metal
5
 
 
 
 
 
6
 
 
 
 
 
7
 
 
 
 
 
8
 
 
 
 
 
9
 
 
 
 
 
10
 
 
 
 
 

Thinnest pad measurement you recorded, in millimetres

How was the pad thickness judged?

 

What prevented access to the pad?

Are the pads wearing evenly across their surface?

 

Even wear usually suggests the caliper or brake arms are sitting square to the rotor or rim. Keep a note of this so future uneven wear stands out.

 

What kind of uneven wear did you notice?

Is any pad worn down to a metal backing plate or metal contact point?

 

Metal-on-metal contact can damage the rotor or rim surface and usually changes stopping performance noticeably. Consider taking the vehicle out of use until the pads and any damaged surface are inspected and addressed by a competent person.

6. Lever Feel, Travel & Modulation

Lever feel is one of the quickest ways to notice a change in a brake system. Compare both levers if the vehicle has two, and squeeze gently as well as firmly so you can feel where the pad first contacts the rotor or rim.

 

Please rate each statement about lever feel

Strongly disagree

Disagree

Neutral

Agree

Strongly agree

Not applicable

The lever feels firm and predictable when squeezed slowly

The stopping point is consistent squeeze after squeeze

The lever returns fully and promptly when released

Lever reach is comfortable for the main user's hand size

The two levers on this vehicle feel similar to each other

Overall lever travel before the brake begins to hold

 

Please describe how close the lever gets to the handlebar or grip, and whether it still slows the vehicle before touching:

 

Please describe the spongy feeling and when you notice it most:

How would you rate the overall firmness of the lever feel?

Does the lever feel change after several repeated squeezes?

 

Please describe the change and how many squeezes it takes to appear:

Do you notice any air-like softness or a slow sink in the lever on a hydraulic system?

 

A soft or slowly sinking lever can have several causes, including pad wear, air in the line, a seal issue or fluid that needs attention. Note the symptom carefully and have the system checked by someone familiar with hydraulic brakes before relying on it.

Is there any visible fluid weeping or residue around the lever body, hose or caliper?

 

Where is the residue, and what does it look like?

Approximate free play before the pads contact, in millimetres (if you measured it)

7. Brake Noise, Vibration & Feel Under Load

Predominant brake noise

 

When does the squeal appear?

 

A grinding sound can come from worn pads, a damaged rotor or rim surface, or trapped grit. It is worth treating this as a priority item and inspecting the surfaces as well as the pads.

 

Please describe the sound as accurately as you can:

Any of these sensations while braking? (mark any that apply)

 

At what speed or in what situation does the pulsing show up most?

 

Please describe how the weakness feels and how much effort is needed:

How confident do you feel about the braking performance right now?

Any other sounds, smells or observations during braking?

8. Rotor, Rim & Caliper Condition Checks

Pads only work well when the surface they press against is clean, true and not deeply worn. These checks help you tell a pad problem from a surface or alignment problem.

 

Is the disc rotor or rim braking surface clean and free of obvious oil or polish residue?

 

What contamination did you notice?

Does the rotor or rim run true without visible wobble?

 

Where does it rub or wobble, and how noticeable is it?

Are there deep grooves, scoring or a noticeable lip on the braking surface?

 

Please describe the depth and location of the grooves or lip as best you can:

Is the caliper or brake arm positioned squarely over the rotor or rim?

 

What looks misaligned?

Do the pads sit flat against the surface rather than at an angle?

 

How would you rate the overall pad seating and alignment?

Are all mounting bolts, retaining pins and clips present and looking secure?

 

Which fasteners or clips are missing, loose or damaged?

Condition of hoses, cables and housings (mark any that apply)

9. Cleaning, Adjustment & Bedding-In Work Performed

Which actions did you carry out during this session? (mark any that apply)

 

Approximately how many controlled stops did you perform during bedding-in?

 

Which pads were replaced, and with what compound if known?

Did you use any cleaning product on the braking surfaces?

 

What product or method did you use?

 

If you plan to clean surfaces later, avoid introducing oils, greases or sprays near pads and braking surfaces, and check the product guidance before use.

Were any parts replaced during this session?

 

Please list the parts replaced and where they came from:

Describe any adjustments you made and how the brake felt afterwards:

Simple pad wear rate reference: wear per unit of use = (starting thickness minus remaining thickness) divided by distance travelled

wear rate=tstart−tremainingd\text{wear rate} = \frac{t_{start} - t_{remaining}}{d}

 

The wear rate above is only a rough comparison aid between checks on the same vehicle. It is not a prediction of pad life, because terrain, load, weather, riding style and pad compound all affect how quickly material is used.

10. Replacement Parts & Consumables Log

Record the parts and materials used or quoted for this vehicle. Line totals are calculated automatically from quantity and unit cost. Enter costs in your own currency; the form does not convert between currencies.

 

Parts and Materials

Part or Material Description

Fitted or Just Quoted

Quantity

Unit Cost

Line Total

A
B
C
D
E
1
Disc brake pad pair
Fitted
1
$24.50
$24.50
2
Rim brake pad set
Quoted
2
$9.75
$19.50
3
Brake cable and housing
Fitted
1
$12.00
$12.00
4
 
 
 
 
$0.00
5
 
 
 
 
$0.00
6
 
 
 
 
$0.00
7
 
 
 
 
$0.00
8
 
 
 
 
$0.00
9
 
 
 
 
$0.00
10
 
 
 
 
$0.00

Estimated total cost of outstanding work not yet performed

Are any required parts currently unavailable or on order?

 

Which parts are outstanding, and what is the expected wait?

11. Stopping Performance Check

If it is safe to do so, check how the vehicle slows in a controlled, open area with no traffic and a smooth surface. Keep speeds low, avoid sudden swerving, and never test with a passenger or child on board until you are confident in the result. If a test is not practical or safe, skip this section and note why.

 

Was a controlled stopping check carried out?

 

What kind of surface and area was used for the check?

 

Please explain why a stopping check was not carried out:

How confident were you in the stopping performance during the check?

How predictable was the braking response during the check?

Approximate distance travelled from first squeeze to a full stop, in metres (estimate is fine)

Approximate speed at the start of the check (in your preferred unit)

Unit used for the speed estimate above

Did the vehicle stop in a straight line without pulling to one side?

 

Which side did it pull toward, and how strongly?

Would you be comfortable using this vehicle in normal conditions right now?

 

Thank you. Continue with the routine schedule below and re-check sooner if the lever feel or noise changes.

 

Please describe the main concern and what you plan to do about it before the vehicle is used again:

12. Follow-Up Actions & Maintenance Schedule

What follow-up actions are needed? (mark any that apply)

Please rank these follow-up priorities for this vehicle, most urgent first

Restore confident stopping power

Silence brake noise

Even out pad wear

Improve lever feel and reach

Reduce long-term running cost

Keep a tidy maintenance record

Suggested interval until the next pad check

Planned date for the next inspection

Planned time for the next inspection (optional)

Would you like a reminder before the next check?

 

How should the reminder be sent?

Will anyone else use this vehicle before the next check?

 

Who will use it, and what will you tell them about its current braking performance?

Please rate the current condition of each area below

Pad material remaining

Lever feel and reach

Noise level during braking

Rotor or rim surface condition

Cable, hose and fastener condition

Overall confidence in stopping power

13. Photos, Notes & Record Confirmation

Photos and short notes make future comparisons far easier. A side-on photo of the pad and a photo of the whole brake assembly are usually the most useful.

 

Please upload a photo of the brake pad and braking surface

Choose a file or drop it here

Please upload a photo of the lever and cable or hose routing

Choose a file or drop it here

Please upload any supporting documents, such as a parts receipt or a previous inspection sheet

Choose a file or drop it here
 

Additional observations, measurements or context worth remembering

I confirm that the observations recorded here reflect what I saw during this session

I understand that brake performance can change with load, weather, surface and wear, and that regular re-checks are sensible

Name of the person completing this record

Please sign to confirm this record

Date the record was completed

Name of a second person who reviewed this record (optional)

How useful was this form for planning your brake maintenance?

Any suggestions for improving this form?

To configure an element, select it on the form.

To add a new question or element, click the Question & Element button in the vertical toolbar on the left.