Project Name
Project Location / Area
General Contractor / Employer
Lifting Subcontractor
Permit Date
Permit Valid Time Period
Start
End
Specific Location of Lift
Description of Load / Work
Select all conditions that trigger this critical lift permit
Load exceeds 75% of crane rated capacity at maximum radius.
Multi-crane / Tandem lift (2 or more cranes lifting a single load).
Lifting personnel in a hoist platform / basket.
Operation within minimum approach distance of energized power lines.
Lifting over occupied buildings, active roadways, or critical processing units.
Non-standard or custom rigging arrangement / complex balance points.
Subsurface / Ground condition concerns (e.g., underground vaults, poor soil capacity).
High-value, unique, or long-lead time equipment item.
Role | Name | Phone Number | Certification # | Certification Exp | ||
|---|---|---|---|---|---|---|
A | B | C | D | E | ||
1 | Lift Director | |||||
2 | Crane Operator | |||||
3 | Primary Signal Person | |||||
4 | Lead Rigger | |||||
5 | Site Safety Manager |
Crane Make & Model
Crane Type
Mobile Hydraulic (Rough Terrain / All Terrain)
Lattice Boom Crawler
Tower Crane
Crane Serial / Equipment ID
Third-Party Annual Inspection Date
Counterweight Installed (lbs)
Main Boom Length (ft)
Jib Length (ft)
Jib Angle (°)
Outrigger Extension
100% Fully Extended
50% Intermediate
On Rubber (N/A)
Weight of Load / Object (lbs)
Source of weight
Scale Ticket
Manufacturer Drawing
Calculated
Weight of Main Hook Block & Ball (lbs)
Weight of Rigging Hardware (slings, shackles, spreader bars) (lbs)
Weight of Jib / Boom Attachments (effective weight) (lbs)
Weight of Hoist Cable below Boom Tip (lbs)
Total Gross Load Weight (lbs)
Maximum Planned Operating Radius (ft)
Crane Rated Capacity at Max Radius (from Chart) (lbs)
Percentage of Rated Capacity (%)
Critical Threshold Policy: Lifts exceeding 85% capacity require written concurrence from a certified Professional Engineer (PE). Lifts exceeding 100% capacity are strictly prohibited.
Check Pass, Fail, or N/A for each requirement:
Safety Requirement | Pass | Fail | N/A | ||
|---|---|---|---|---|---|
A | B | C | D | ||
1 | Ground & Soil Conditions: Ground compaction tested or matting installed per engineered bearing capacity calculations. | ||||
2 | Outrigger Cribbing/Pads: Steel plates or engineered timber mats properly sized and placed under outrigger floats. | ||||
3 | Underground Hazards: Location of underground utilities, vaults, pipes, or voids verified and clear of outriggers. | ||||
4 | Power Line Distances: Minimum approach distance maintained per OSHA Table T-1 (e.g., 20 ft for up to 350 kV). | ||||
5 | Weather & Wind Limits: Sustained wind speed is below maximum manufacturer limit | ||||
6 | Rigging Inspection: All slings, shackles, spreader beams, and eye bolts inspected and tagged with safe working load (SWL). | ||||
7 | Tag Lines: Minimum of two tag lines available and assigned to control load rotation. | ||||
8 | Exclusion Zone: Drop zone barricaded with warning tape; unauthorized personnel cleared from area. | ||||
9 | Communications: Two-way radios tested on dedicated channel, or visual signals agreed upon by Operator and Signal Person. | ||||
10 | Safety Devices: Anti-Two Block (A2B) device, boom angle indicator, and LMI (Load Moment Indicator) operational and calibrated. |
Current Site Wind Speed (mph)
Manufacturer Maximum Wind Speed Threshold (mph)
Before lifting, the Lift Director must conduct a mandatory toolbox talk with all involved personnel.
Reviewed sequence of operation and load path.
Clarified line-of-sight limits and designated signal personnel.
Emergency stop command reviewed (Anyone on site can call STOP if a safety issue arises).
Emergency action plan and evacuation routes confirmed.
PPE inspected (hard hats, high-vis vests, steel-toe boots, fall protection if applicable).
By signing below, all parties confirm that the pre-lift checks are complete, calculations are verified, and conditions are safe to perform the critical lift.
I certify that I have inspected the lift site, reviewed the critical lift plan, verified all load calculations, and conducted the pre-lift briefing.
Lift Director Signature
I confirm that I have reviewed the crane capacity chart, inspected the crane safety devices, and agree that the lift can be performed safely under current site conditions.
Crane Operator Signature
This Critical Crane Lift Permit is approved based on the verified safety measures and conditions noted above.
Site Safety Manager / Authority Having Jurisdiction Signature
To be completed immediately following the conclusion of the lifting operation.
Lift completed safely with no incidents or near-misses.
Equipment lowered and secured.
Exclusion zones and barricades removed.
Incident / Near-Miss occurred (If checked, attach Incident Investigation Report).
Lift Director Post-Lift Signature
Form Template Insights
Important Note:
This analysis provides strategic insights to help you get the most from your form's submission data for powerful follow-up actions and better outcomes.
AI-Generated Content: This template and its accompanying guidance are AI-generated to provide a practical starting point for your form-building needs. Please review and customise the content to ensure it is accurate, appropriate and suitable for your intended use.
This guide is provided for general informational and planning purposes only. It does not constitute professional, legal, financial, medical, employment, privacy, regulatory, or advice of any other kind, nor does it certify that this template is suitable or compliant for any particular jurisdiction or purpose.
Laws, regulations, industry practices and business requirements vary. You are responsible for reviewing and customising the template to suit your intended use and obtaining advice from appropriately qualified professionals where necessary.
Please delete this section before publishing your form. See our Terms of Service for further information.
A Critical Crane Lift High-Risk Clearance Permit Form is not administrative red tape—it is a live control document engineered to prevent catastrophic mechanical failure, structural collapse, and loss of life. When a crane operates near its limit, lifts over active infrastructure, or coordinates with other machinery, the margin for error disappears.
Every section and field within the template addresses specific failure modes identified across decades of industrial accident investigations. Here is a section-by-section breakdown of why each question exists and what goes wrong when it is omitted.
Mandatory Questions Recommendation
Important Note:
This section explains why certain fields in this form are marked as required and provides general guidance on how these requirements may support the collection of complete, accurate and relevant information.
Required fields and information-collection obligations may vary depending on your industry, jurisdiction, business operations and intended use of the form. A field marked as required in this template does not necessarily mean that collecting the information is legally mandatory.
Please review each required field to determine whether it is necessary, appropriate and lawful for your particular purpose. Consider applicable privacy, data protection, consent and industry-specific requirements, and consult an appropriately qualified legal, privacy or compliance professional where necessary.
Please delete this section before publishing your form. See our Terms of Service for further information.
Making specific questions mandatory on a Critical Crane Lift Permit form ensures that no critical verification step can be skipped, bypassed, or left to memory. In high-risk lifting operations, missing data points directly correlate with structural overloads, rigging failures, and workplace incidents.
Here are the essential mandatory fields on this permit form, along with the operational reasons why each must be enforced as required input fields.
To configure an element, select it on the form.