Metallographic Examination Record Form

1. Sample identification and submission details

Record the identity and origin of the specimen exactly as received. Accurate identification links every observation in this form to a specific piece of material and helps avoid mix-ups between samples examined on the same day.

 

Sample/specimen ID

Batch, heat, melt or lot number

Project, order or work reference

Submitted by/requesting party

Date sample received

Date of examination

Specimen source

 

Please describe the component, its function and the reason for examination:

 

Please describe the failure or degradation, service conditions and time in service:

 

Weld process and region examined (e.g. weld metal, heat-affected zone, base metal):

 

Coating or layer type and nominal thickness:

Specimen location and orientation reference

Condition of the sample on receipt

 

Please describe the corrosion, oxidation or contamination observed:

 

Please describe the deformation and its likely origin:

Has the sample already been examined by another technique?

 

Which techniques were used previously?

 

Please summarise the composition results available:

 

Please summarise the non-destructive testing findings:

Attach the submission form, drawing extract or request documentation

Choose a file or drop it here
 

The specimen identifiers match the accompanying documentation and are legible on the mounted specimen.

2. Material and alloy details

Describe the material as fully as the available information allows. Where the exact grade is unknown, record what is known and mark the rest as unverified so that later interpretation can be read in the right context.

 

Material designation or grade

Material family

 

Any information on ferrite content or delta-ferrite expectation:

 

Expected phase balance or ageing condition:

 

Form of graphite expected

Nominal chemical composition (weight percentages, if known)

Is a chemical composition report available?

 

How was the composition determined?

Product form

Supply or heat-treatment condition (as stated by the submitter)

 

Ageing temperature and duration, if known:

 

Surface treatment details, if known:

Nominal wall or section thickness (mm)

Was the material exposed to elevated temperature during service or testing?

 

Approximate temperature and duration of exposure

Any additional material background relevant to interpretation

3. Sectioning and mounting

Sectioning can easily introduce heat, deformation or smeared material that later looks like a microstructural feature. Record how the specimen was removed and mounted so that preparation artefacts can be recognised during examination.

 

Sectioning method

 

Was heat damage in the cut region checked before grinding?

 

Please note how much material was removed during grinding to clear the affected zone:

 

Was the recast or re-solidified layer removed before examination?

 

Estimated thickness removed and method used:

Cut-off wheel, blade or wire specification

Was a coolant or lubricant used during cutting?

 

Coolant or lubricant type

Is there any evidence of cutting-induced deformation, heating or contamination?

 

Please describe the affected region and the remedial action taken:

Mounting method

Was edge retention an important consideration for this specimen?

 

Which edge-retention approach was used?

Mount or specimen diameter (mm)

Was vacuum impregnation used to fill porosity or cracks?

 

Impregnating medium used

The specimen orientation in the mount is recorded and marked on the mount.

4. Grinding and polishing sequence

Enter the full surface-preparation sequence. Each step should remove the damage introduced by the previous step; the final surface must be free of scratches, smearing and pull-out before etching or examination.

 

Surface preparation sequence log

Step no.

Abrasive or polishing surface

Grit or particle size

Lubricant or coolant

Duration (seconds)

Force or pressure applied

Notes (rotation, direction, observations)

A
B
C
D
E
F
G
1
1
Silicon carbide paper
P240
Water
90
Light
Planar grinding, rotate specimen 90 degrees between steps
2
2
Silicon carbide paper
P600
Water
90
Light
Continue until previous scratches removed
3
3
Diamond suspension on woven cloth
6 µm
Water-based lubricant
300
Moderate
Final deformation removal before fine polishing
4
 
 
 
 
 
 
 
5
 
 
 
 
 
 
 
6
 
 
 
 
 
 
 
7
 
 
 
 
 
 
 
8
 
 
 
 
 
 
 
9
 
 
 
 
 
 
 
10
 
 
 
 
 
 
 

Final polishing method

Final polishing duration (minutes)

Was vibratory or extended mechanical polishing used to obtain a deformation-free surface?

 

Vibratory polishing duration (hours)

Was the polished surface inspected before etching to confirm it was free of preparation artefacts?

 

Result of that inspection

Cleaning performed after polishing

 

Cleaning medium and duration

Polishing continued until the surface appeared free of visible scratches under oblique illumination.

5. Etching conditions

Etching reveals microstructural contrast by preferentially attacking certain phases, grain boundaries or orientations. Record the etchant and timing precisely, since over-etching can mask fine features and under-etching can hide grain boundaries.

 

Was the specimen etched to reveal microstructural contrast?

 

Why was the specimen examined unetched?

Etchant(s) used

 

Nital concentration and etching time used:

 

Electrolytic parameters (voltage, current density, time):

Etchant concentration or composition

Etching time (seconds)

Was etching performed at ambient room temperature?

 

Solution temperature during etching

Etching technique

 

Please record electrode arrangement, voltage, current and duration:

Was the specimen re-polished and re-etched during the examination?

 

Please describe the reason and the sequence followed:

Etching was stopped as soon as the structure became clearly visible in order to limit over-etching.

6. Examination equipment and imaging setup

Microscope settings determine how reliably features can be resolved and measured. Record illumination mode, magnification and calibration so that any image produced from this examination can be interpreted consistently later.

 

Primary examination technique

 

Which electron imaging modes were used?

 

Elements or phases detected and representative locations analysed:

Instrument identifier

Magnification used during examination

Objective lens and numerical aperture used for the principal images

Calibration reference used

Date of the most recent instrument calibration or verification

Was an image calibration or scale reference applied before capturing images?

 

Calibration value recorded

Illumination or filter settings used

Number of fields of view examined in total

7. Microstructure observations

Describe what is actually visible before drawing conclusions. Distinguish clearly between directly observed features and interpretations, and note whether features are representative or confined to isolated fields.

 

Overall microstructure classification (as observed)

 

Predominant martensite morphology

 

Estimated phase balance and phase distribution:

 

Direction of grain elongation relative to the specimen

Estimated abundance of observed constituents

Absent

Trace (under 1%)

Minor (1 to 5%)

Moderate (5 to 20%)

Major (above 20%)

Not assessed

Ferrite

Pearlite or lamellar constituent

Bainite

Martensite

Retained austenite

Carbides or other precipitates

Graphite

Intermetallic or interdendritic phases

Predominant phase constituents in plain language

Presence and distribution of notable microstructural features

Not observed

Rare or trace

Present in localised areas

Present in most fields examined

Dominant feature

Not assessed

Grain boundaries clearly resolved

Prior-austenite grain boundaries visible

Annealing or deformation twins

Compositional banding or segregation

Grain boundary precipitate films or networks

Decarburised or depleted surface layer

Surface scale, oxide or reaction layer

Second-phase particles aligned with working direction

Was quantitative image analysis performed?

 

Which parameters were measured?

Detailed description of the microstructure observed

Uniformity of the structure across the fields examined

8. Grain size and morphology

Grain size affects strength, toughness and formability and can indicate whether the expected thermal or mechanical processing took place. Record both the measurement method and the result, since different methods can give different numbers on the same specimen.

 

Grain size determination method

 

Chart or comparison reference used (as named in the laboratory documentation):

 

Software, thresholding approach and number of fields measured:

Mean grain size (µm)

Grain size index or class number (if a chart or index scale was used)

Grain size range (minimum to maximum)

Predominant grain shape

Was grain size measured in more than one specimen orientation?

 

Please report the values obtained for each orientation:

Was abnormal or exaggerated grain growth observed?

 

Please describe the extent, location and any suspected contributing factor:

Is there evidence of partial recrystallisation or mixed grain structure?

 

Please describe the distribution of the fine and coarse grain populations:

9. Non-metallic inclusions and second-phase particles

Inclusions are usually assessed on the polished, unetched surface. Their type, shape, size and distribution influence machinability, fatigue behaviour and fracture path, so record both what was seen and how it was rated.

 

Were non-metallic inclusions observed?

 

On what basis was the inclusion assessment made?

Inclusion types observed

 

Please describe what additional technique is needed to identify these particles:

Inclusion distribution

 

Location and approximate size of the clusters:

Inclusion observation and rating log

Inclusion type or appearance

Rating method or chart used

Severity (1 = minimal, 5 = severe)

Observed size range

Field or location examined

Notes

A
B
C
D
E
F
1
Elongated stringers
Visual comparison chart
 
5 to 40 µm long
Central region, transverse section
Sparse, aligned with rolling direction
2
Fine globular particles
Visual comparison chart
 
2 to 8 µm diameter
Throughout
Fairly uniform distribution
3
 
 
 
 
 
 
4
 
 
 
 
 
 
5
 
 
 
 
 
 
6
 
 
 
 
 
 
7
 
 
 
 
 
 
8
 
 
 
 
 
 
9
 
 
 
 
 
 
10
 
 
 
 
 
 

Was an inclusion rating performed against a published or internal reference chart?

 

Reference chart or method designation as recorded in the laboratory documentation

Comments on inclusions and their possible effect on the material

10. Defects, anomalies and damage features

Record all anomalies even if they appear minor. Note whether each feature is intrinsic to the material, related to processing, or produced during preparation, and describe its location and dimensions where possible.

 

Features observed in the examined sections

 

Please describe the intergranular cracking: extent, branching and possible association with precipitates or attack:

 

Please describe the corrosion morphology, affected phases and depth of attack:

 

Measured thickness of the depleted or decarburised layer:

Do the observed defects appear related to material processing rather than service?

 

Which processing stage is most likely involved?

 

Please explain why service-related or environmental factors are suspected:

Were the dimensions of the defects measured?

 

Measured values

Could any observed feature be an artefact of specimen preparation?

 

Please identify the suspected artefact and the evidence supporting that interpretation:

Recommended additional examination

 

Proposed traverse position and spacing:

Narrative description of defects and anomalies

11. Micro-hardness and local mechanical response (optional)

Micro-hardness can help confirm whether the observed microstructure matches the stated condition and can reveal surface layers, softened zones or heat-affected regions. Complete this section only if hardness testing was carried out.

 

Was a hardness or micro-hardness test performed on the specimen?

 

Why was hardness testing not performed?

Hardness test type

 

Applied force and dwell time used for the micro-indentation measurements:

Hardness measurement record

Location or distance from surface

Applied force

Hardness value

Scale or unit used

Notes (indent quality, phase under indent, cracking)

A
B
C
D
E
1
Surface, approx. 0.05 mm
100
245
HV0.1
Indent well formed, small scatter
2
Sub-surface, approx. 0.5 mm
100
288
HV0.1
Indent placed in matrix
3
Core
100
292
HV0.1
Consistent with matrix value
4
 
 
 
 
 
5
 
 
 
 
 
6
 
 
 
 
 
7
 
 
 
 
 
8
 
 
 
 
 
9
 
 
 
 
 
10
 
 
 
 
 

Hardness trend or gradient observed

Do the hardness results appear consistent with the microstructure observed?

 

Please explain the observed consistency:

 

Please describe the discrepancy and any possible explanations:

12. Photomicrographs and image record

Images are the primary evidence supporting the written observations. Each image should be traceable to a location on the specimen and include a scale reference so that features can be re-measured later.

 

Image log

Image ID

Magnification used

Field or location on specimen

Etched surface?

Scale bar length (µm)

What the image shows

Image file

A
B
C
D
E
F
G
1
IMG-001
200×
Centre of section
Yes
100
Overview of the as-polished surface showing inclusion distribution
 
2
IMG-002
500×
Near surface region
Yes
50
Etched surface showing grain structure and surface layer
 
3
 
 
 
 
 
 
 
4
 
 
 
 
 
 
 
5
 
 
 
 
 
 
 
6
 
 
 
 
 
 
 
7
 
 
 
 
 
 
 
8
 
 
 
 
 
 
 
9
 
 
 
 
 
 
 
10
 
 
 
 
 
 
 

Upload the principal overview photomicrograph

Choose a file or drop it here

Upload a higher magnification detail photomicrograph

Choose a file or drop it here

Upload the complete image set, measurement export or supporting report

Choose a file or drop it here
 

Do all captured images include a scale bar or magnification reference?

 

Please explain how the magnification or feature size can still be determined from the images:

Image file names correspond to the image IDs listed in the image log.

13. Assessment against reference information

Use this section to compare the observations with whatever reference information is available. Where no reference exists, state that clearly. Any comparison reflects the analyst's judgement based on the material examined and the information provided at the time.

 

Basis used for the assessment

 

Reference document identifier and revision as supplied:

Is the observed microstructure consistent with the stated heat-treatment or supply condition?

 

Please explain the features that support this consistency:

 

Please describe the discrepancy and any suggested causes:

Analyst assessment of the examined characteristics

Poor

Fair

Good

Very good

Excellent

Not assessed

Microstructure type and constituent phases

Grain size and morphology

Inclusion content and distribution

Freedom from defects and anomalies

Surface layer condition

Uniformity between fields examined

Overall agreement between observations and the stated expectation

Limitations and uncertainties of this examination

14. Conclusion and recommendations

Summarise the findings and state the basis of the conclusion. Conclusions are limited to the specimen examined and to the information available at the time of the examination.

 

Overall examination outcome

 

Please state which aspects are questionable and what would resolve the question:

 

What additional work would make the examination conclusive?

Analyst conclusion

Recommended actions

Recommendations and, where relevant, suggested corrective actions

Is a follow-up examination or review required?

 

Target date for the follow-up activity

Analyst confidence in the conclusions drawn (self-assessment)

15. Review and record control

Complete this section to keep the examination record traceable. Signing indicates that the entry reflects the observations made on the specimen(s) examined; it does not guarantee results for other specimens, components or batches.

 

Analyst name

Analyst role or background (as stated by the analyst)

Examination date and time

Analyst signature

Was this record reviewed by a second person?

 

Reviewer name

Reviewer signature

Report or record reference number

Date the record was completed

Storage location of the specimen after examination

The observations recorded here relate only to the specimen(s) examined and may not represent the whole component, batch or delivery.

I have checked this record for completeness and internal consistency.

Analysis for Metallographic Examination Form – Microstructure, Inclusions and Defect Record

Important Note:

This analysis provides strategic insights to help you get the most from your form's submission data for powerful follow-up actions and better outcomes.

AI-Generated Content: This template and its accompanying guidance are AI-generated to provide a practical starting point for your form-building needs. Please review and customise the content to ensure it is accurate, appropriate and suitable for your intended use.

This guide is provided for general informational and planning purposes only. It does not constitute professional, legal, financial, medical, employment, privacy, regulatory, or advice of any other kind, nor does it certify that this template is suitable or compliant for any particular jurisdiction or purpose.

Laws, regulations, industry practices and business requirements vary. You are responsible for reviewing and customising the template to suit your intended use and obtaining advice from appropriately qualified professionals where necessary.

Please delete this section before publishing your form. See our Terms of Service for further information.


 

Form Overview and Purpose

This Metallographic Examination Form is a comprehensive, structured record designed to document the microscopic examination of metals and alloys. Its primary purpose is to capture every stage of the metallographic workflow—from sample receipt and material identification through sectioning, polishing, etching, microscopy, microstructural analysis, defect assessment, imaging and final conclusion—in a single, traceable record. The form is organised into thirteen clearly defined sections that mirror a logical laboratory sequence, which reduces the chance of omitting critical information and allows reviewers to follow the reasoning behind each finding.

 

Strengths and Effective Design Choices

One of the form's greatest strengths is its sequential organisation. Each section builds upon the previous one, moving from specimen identity to material description, then preparation details, equipment settings, observations, and finally assessment and conclusions. This mirrors the actual workflow of a metallographic examination and makes the form intuitive for the analyst to complete and for a reviewer to audit.

 

The form makes extensive use of conditional follow-up logic. For example, selecting Specimen source triggers context-specific follow-ups such as weld process details for weldments or failure descriptions for degraded parts. This branching approach collects relevant depth only when applicable, keeping the form efficient for routine examinations while capturing rich detail for complex cases.

 

The inclusion of tables for the surface preparation sequence, inclusion observation log, hardness measurements and image log allows structured, tabular data entry that is far more useful for trend analysis and comparison than free-text alone. The sample rows provided in the tables serve as helpful guidance for analysts unfamiliar with the expected format.

 

The form also incorporates checkboxes for verification—such as confirming specimen identifiers match documentation, that the polished surface was free of scratches, and that observations relate only to the specimen examined. These act as lightweight quality-control prompts embedded within the record.

 

Section-by-Section Insights

Sample identification and submission details

Sample/specimen ID serves as the primary identifier linking every observation in the record to a specific piece of material. It is the foundation of traceability and prevents mix-ups when multiple specimens are examined in a single session.

 

Batch, heat, melt or lot number connects the examination to a specific production batch, which is useful when correlating microstructural findings with processing history or when tracing issues back to a production run.

 

Project, order or work reference ties the examination to a broader administrative context—such as a work order or engineering project—helping with scheduling, reporting and retrieval of the record.

 

Submitted by/requesting party records who initiated the examination request, which supports communication, follow-up queries and accountability for the scope of work.

 

Date sample received and Date of examination establish the timeline of handling, which may be relevant when assessing storage effects or when interpreting sample condition on receipt.

 

Specimen source categorises the origin of the material (raw stock, production component, failed part, weldment, coating, coupon or additive part). This context is essential for interpreting microstructural observations—for instance, a failed part may require different scrutiny than a routine quality-control coupon. The follow-up prompts for specific sources are well-targeted, requesting descriptive details only for the relevant case.

 

Specimen location and orientation reference captures where on the component the section was taken and in what direction, which is important for understanding whether the observed structure is representative of a specific region (e.g. near-surface vs. centreline, transverse vs. longitudinal).

 

Condition of the sample on receipt documents any pre-existing damage, corrosion or deformation. This is operationally significant because surface contamination or prior sectioning can limit what can be observed and may introduce preparation challenges.

 

Has the sample already been examined by another technique? captures complementary data—such as chemical composition or non-destructive testing results—that may contextualise the microstructural findings and reduce redundant work.

 

The file upload field for submission documentation and the checkbox confirming identifier legibility support traceability and administrative completeness.

 

Material and alloy details

Material designation or grade provides the material context needed to interpret the microstructure—for example, the expected phases in an austenitic stainless steel differ fundamentally from those in a medium-carbon steel. Recording this early ensures all subsequent observations are read in the correct material context.

 

Material family groups the alloy into broad categories (carbon steel, stainless steel variants, aluminium alloy, cast iron, etc.), which facilitates categorised record-keeping and enables targeted follow-up questions such as expected graphite form for cast irons or phase balance for duplex structures.

 

Nominal chemical composition and Is a chemical composition report available? capture quantitative composition data when it exists, allowing the analyst to correlate microstructural observations with the actual alloy content and to assess whether the structure is consistent with expectations for that composition.

 

Product form (plate, bar, tube, forging, casting, etc.) influences the expected microstructural features—castings may show dendritic structures while rolled plate may exhibit banded or elongated grain features.

 

Supply or heat-treatment condition is critical for evaluating whether the observed microstructure matches the stated condition. Follow-ups for age-hardening parameters and surface treatment details show thoughtful, context-aware design.

 

Nominal wall or section thickness provides dimensional context relevant to sectioning feasibility and to the representativeness of the observed features.

 

Was the material exposed to elevated temperature? and Any additional material background capture service history and special circumstances that may explain unusual microstructural features such as creep damage, oxidation or prior repair effects.

 

Sectioning and mounting

Sectioning method records how the specimen was cut. This is operationally important because abrasive cutting can introduce heat damage or deformation, and electrical discharge machining can create a recast layer—both of which may be mistaken for genuine microstructural features if not properly identified and documented.

 

Cut-off wheel, blade or wire specification and Was a coolant or lubricant used? capture further detail about the cutting conditions, supporting traceability and helping to assess whether cutting damage is likely.

 

Is there any evidence of cutting-induced deformation? prompts the analyst to assess the sectioned surface for preparation artefacts and to note remedial action, which strengthens the reliability of later observations.

 

Mounting method (hot compression, cold epoxy, conductive mount, electroless plating, etc.) is relevant because mounting can affect edge retention, and hot mounting may alter heat-sensitive surface layers.

 

Was edge retention an important consideration? and its follow-up capture the approach taken to preserve the specimen edge—a common challenge in metallography, especially when evaluating surface coatings or decarburised layers.

 

Mount or specimen diameter provides dimensional reference, while Was vacuum impregnation used? documents whether porosity or cracks were filled to improve edge integrity during polishing.

 

The checkbox confirming that specimen orientation in the mount is recorded and marked is a good practice prompt that aids later re-examination or re-imaging.

 

Grinding and polishing sequence

The Surface preparation sequence log table captures the step-by-step grinding and polishing protocol with columns for step number, abrasive, grit size, lubricant, duration, force and notes. This structured approach ensures that the full preparation history is documented and that any question about surface artefacts can be traced back to specific preparation steps.

 

Final polishing method records the last surface-finish step, which is directly relevant to whether the polished surface will reveal inclusions and fine phases clearly.

 

Final polishing duration, Was vibratory or extended mechanical polishing used? and the pre-etching inspection prompt with its result options (free of scratches, smearing, pull-out, etc.) collectively provide strong quality-assurance evidence for the specimen surface quality.

 

Cleaning performed after polishing documents how residues were removed before etching or examination, which can affect etching behaviour and surface appearance.

 

The checkbox regarding polishing under oblique illumination reinforces best practice in surface preparation.

 

Etching conditions

Was the specimen etched to reveal microstructural contrast? is a key branching question—if the answer is no, the form captures the reason (e.g. inclusion assessment only, etching deferred), preserving context for readers who may wonder why grain boundaries are not visible.

 

Etchant(s) used offers a comprehensive list of common reagents (nital, picral, glyceregia-type, Kroll-type, electrolytic options, tint etchants, etc.) with targeted follow-ups for concentration and electrolytic parameters. This level of detail supports reproducibility.

 

Etchant concentration or composition, Etching time and Etching technique (immersion, electrolytic, thermal, plasma) collectively document the etching protocol precisely, since etching behaviour is highly sensitive to these parameters.

 

Was the specimen re-polished and re-etched? captures any iterative preparation, which is common when initial etching does not produce satisfactory contrast or when inclusions must be re-examined on a fresh surface.

 

The checkbox about stopping etching as soon as the structure becomes visible reinforces the practical guidance embedded in the form's introductory paragraph.

 

Examination equipment and imaging setup

Primary examination technique (bright-field, dark-field, differential interference contrast, polarised light, or scanning electron microscopy) documents the illumination or imaging mode, which affects what features are visible and how they should be interpreted.

 

Instrument identifier provides traceability to a specific microscope or imaging system, supporting audit and instrument-maintenance records.

 

Magnification used during examination is essential for correlating observations with images and for later measurement of feature sizes.

 

Objective lens and numerical aperture, Calibration reference used, Date of most recent calibration and Image calibration value collectively establish the measurement traceability of any dimensions reported in the record.

 

Illumination or filter settings and Number of fields of view examined provide additional context on the thoroughness and optical conditions of the examination.

 

Microstructure observations

Overall microstructure classification (as observed) categorises the dominant structure (ferrite, martensite, austenite, dendritic, etc.) and includes targeted follow-ups for martensite morphology, phase balance and grain elongation direction. This structured classification facilitates comparison across multiple examinations and records.

 

The two matrix rating tables—one for estimated abundance of constituents (ferrite, pearlite, martensite, carbides, graphite, etc.) and one for notable features (grain boundaries, banding, surface layers, second-phase alignment)—provide a semi-quantitative summary that is far easier to scan and compare than narrative text alone.

 

Predominant phase constituents in plain language captures an accessible description that complements the structured ratings.

 

Was quantitative image analysis performed? and its follow-up document any measured parameters (volume fractions, grain size, porosity, coating thickness), adding quantitative rigour where available.

 

Detailed description of the microstructure observed is the central narrative field, allowing the analyst to describe morphology, distribution, uniformity and field-to-field variation in their own words.

 

Uniformity of the structure across the fields examined provides a quick visual rating that helps readers assess the representativeness of the observations.

 

Grain size and morphology

Grain size determination method (visual comparison, planimetric, linear intercept, image analysis, previously reported, or not determined) documents the measurement approach, with follow-ups for chart references and software details.

 

Mean grain size, Grain size index or class number and Grain size range capture both a central value and spread, which is more informative than a single number.

 

Predominant grain shape (equiaxed, elongated, columnar, dendritic, bimodal, irregular) provides morphological context relevant to processing history and mechanical behaviour.

 

The questions on multiple orientations, abnormal grain growth and partial recrystallisation prompt the analyst to look for and record notable grain-size anomalies that may indicate processing issues.

 

Non-metallic inclusions and second-phase particles

Were non-metallic inclusions observed? is a foundational question—if none were seen, the form captures the basis for that assessment (limited fields examined, surface condition issues, etc.), ensuring transparency.

 

Inclusion types observed provides a morphological classification (globular, stringer, angular, glassy, exogenous, film-like) with a follow-up requesting identification of additional techniques needed when optical microscopy alone is insufficient.

 

Inclusion distribution (random, stringer, clustered, grain-boundary concentrated, surface concentrated) is important because distribution can differ significantly even when overall volume fraction is similar.

 

The Inclusion observation and rating log table with severity ratings, size ranges and locations provides a structured, repeatable record that can be compared across batches.

 

Was an inclusion rating performed against a reference chart? captures the standardisation basis, and Comments on inclusions and their possible effect allows the analyst to connect observations to practical implications.

 

Defects, anomalies and damage features

Features observed in the examined sections offers a broad checklist of potential defects—gas pores, shrinkage cavities, intergranular and transgranular cracks, corrosion attack, creep cavitation, weld-related features, surface layers, quench cracking and more—with targeted follow-ups for the most consequential types.

 

Do the observed defects appear related to material processing rather than service? and its follow-up prompt the analyst to categorise the likely origin, which is valuable for root-cause analysis.

 

Were the dimensions of the defects measured? captures quantitative data when available, and Could any observed feature be an artefact? is a critical quality prompt that helps distinguish genuine defects from preparation artefacts.

 

Recommended additional examination and Narrative description of defects and anomalies close the loop by documenting both the findings and suggested next steps.

 

Micro-hardness and local mechanical response (optional)

This optional section, clearly labelled as such, supports correlation between microstructure and mechanical properties. Was a hardness or micro-hardness test performed? gates the section, with a reason-prompt if testing was not done.

 

The Hardness measurement record table with location, applied force, hardness value, scale and notes is well-structured for recording traverse data.

 

Hardness trend or gradient observed and Do the hardness results appear consistent with the microstructure observed? encourage the analyst to cross-check mechanical data against structural findings.

 

Photomicrographs and image record

The Image log table (image ID, magnification, location, etched status, scale bar length, description, and image upload) provides a comprehensive, traceable record linking each image to its provenance. Separate upload fields for the principal overview photomicrograph and higher magnification detail ensure key images are readily accessible.

 

Do all captured images include a scale bar? and the checkbox confirming file-name-to-log correspondence are excellent quality-control prompts for image management.

 

Assessment against reference information

Basis used for the assessment records whether the comparison is against an internal specification, customer requirement, published charts or general good practice—with a follow-up for document identifiers. This transparency is important because the reliability of the assessment depends heavily on the reference used.

 

Is the observed microstructure consistent with the stated condition? prompts explicit comparison with expectations, and the matrix rating table for assessed characteristics (microstructure type, grain size, inclusions, defects, surface layers, uniformity) provides a structured scorecard.

 

Overall agreement rating and Limitations and uncertainties field encourage honest, transparent reporting of the boundaries of the examination.

 

Conclusion and recommendations

Overall examination outcome provides a clear, categorical verdict with follow-ups for questionable or inconclusive cases that request the specific aspects needing resolution and recommended additional work.

 

Analyst conclusion is the narrative summary tying all observations together, and Recommended actions offers a structured list of possible follow-up measures.

 

Analyst confidence in the conclusions (star rating) adds a useful self-assessment dimension.

 

Review and record control

Analyst name, Examination date and time and Analyst signature establish accountability and traceability. The review by a second person question with reviewer name and signature fields supports a two-person review workflow where appropriate.

 

Storage location of the specimen after examination ensures the physical specimen can be retrieved for re-examination.

 

The final checkboxes reminding the analyst that observations relate only to the specimen examined and that the record has been checked for completeness are well-placed closing reminders.

 

Data Collection Implications

This form will produce a rich, multi-dimensional dataset suitable for quality records, batch comparison and trend analysis. The structured fields (tables, ratings, checkboxes) support quantitative aggregation, while the narrative fields capture contextual nuance. Because the form collects detailed preparation parameters, equipment settings and analyst identity, the records are suitable for internal traceability and for reproducing the examination if needed. From a privacy standpoint, the form captures analyst names and signatures—identifiable personal data—which should be handled in accordance with the organisation's data-handling practices. The data collected is primarily technical rather than sensitive.

 

User Experience Considerations

The form's logical sequencing and clear introductory paragraphs for each section help guide the analyst. The use of placeholder text with concrete examples (e.g. "SP-2025-0148-A", "Heat 4471B/Lot 22C") is excellent for reducing ambiguity. However, the form is lengthy—thirteen sections with numerous questions—so completion in a single sitting may be demanding. The conditional follow-ups help reduce unnecessary fields, but users unfamiliar with metallography may still feel overwhelmed. The table-based log sections are well-designed but require careful entry. Overall, the form strikes a good balance between thoroughness and structure, and the checkboxes serve as helpful quality gates without adding significant friction.

 

Overall Summary

This Metallographic Examination Form is a well-engineered, comprehensive instrument that captures the full scope of a metallographic examination with appropriate granularity at each stage. Its strengths include logical workflow-aligned structure, intelligent conditional logic, structured table-based logs for preparation and observations, embedded quality-control prompts, and transparent treatment of limitations and uncertainties. The form collects data in a way that supports both narrative reporting and structured comparison across examinations. Areas for consideration include the overall form length, which may benefit from collapsible or expandable sections in a digital format to reduce perceived effort, and the potential addition of a brief completion-time estimate or progress indicator for analysts completing the form on screen. The comprehensive approach ensures that the resulting records are detailed, traceable and suitable for a wide range of metallographic evaluation purposes, from routine quality control to failure investigation.

 

Mandatory Question Analysis for Metallographic Examination Form – Microstructure, Inclusions and Defect Record

Important Note:

This section explains why certain fields in this form are marked as required and provides general guidance on how these requirements may support the collection of complete, accurate and relevant information.

Required fields and information-collection obligations may vary depending on your industry, jurisdiction, business operations and intended use of the form. A field marked as required in this template does not necessarily mean that collecting the information is legally mandatory.

Please review each required field to determine whether it is necessary, appropriate and lawful for your particular purpose. Consider applicable privacy, data protection, consent and industry-specific requirements, and consult an appropriately qualified legal, privacy or compliance professional where necessary.

Please delete this section before publishing your form. See our Terms of Service for further information.

 

Mandatory Question Justifications

Sample/specimen ID
Recommendation: Requiring this field ensures every observation recorded in the form is linked to a specific specimen, which is foundational for traceability and record-keeping. Without a unique identifier, it would be extremely difficult to retrieve, compare or audit the examination record at a later stage. The form creator should confirm that the ID format used aligns with their laboratory's existing specimen-tracking conventions.

 

Specimen source
Recommendation: Requiring this field establishes the material context early in the record, which directly influences how subsequent microstructural observations should be interpreted. For example, a failed component may warrant different scrutiny than a routine coupon. Making this mandatory ensures the reader understands the examination scope before reading the findings. Its necessity depends on the form creator's operational workflow, but it broadly supports clearer, more contextualised documentation.

 

Material designation or grade
Recommendation: Requiring this field ensures the analyst and any reviewer can evaluate the microstructure in the context of the material being examined. Expected phases, grain structures and defect types vary substantially by alloy family, so recording the designation supports meaningful interpretation and comparison. If the exact grade is unknown, the form's guidance to record what is known and mark the rest as unverified is helpful and should be retained.

 

Sectioning method
Recommendation: Requiring this field supports the identification of potential preparation artefacts. Different cutting methods can introduce heat damage, deformation or recast layers that may be mistaken for microstructural features. Documenting the method used allows later readers to distinguish genuine features from preparation effects. The form creator should confirm whether this level of detail aligns with their quality-assurance expectations.

 

Final polishing method
Recommendation: Requiring this field documents the last surface-preparation step, which directly influences whether inclusions, fine phases and grain boundaries are clearly visible. Different polishing methods can produce different levels of surface finish and may introduce or remove features. Recording the final method supports reproducibility and quality traceability of the specimen surface.

 

Was the specimen etched to reveal microstructural contrast?
Recommendation: Requiring this field is important because etching status fundamentally changes how the microstructure observations should be read. If the specimen was examined unetched, certain features (grain boundaries, phase contrast) will not be visible and the absence of such observations is expected rather than anomalous. Making this mandatory ensures the reader knows the examination conditions and prevents misinterpretation of missing observations. The follow-up capturing the reason for unetched examination further supports record completeness.

 

Primary examination technique
Recommendation: Requiring this field records the imaging or illumination mode used, which affects what features are visible and how images should be interpreted. Bright-field, dark-field, polarised light and electron imaging each reveal different aspects of microstructure. Capturing this mandatory ensures the observations and images can be properly contextualised and supports reproducibility if the examination is repeated.

 

Magnification used during examination
Recommendation: Requiring this field establishes the scale at which observations were made and images captured. Without magnification data, dimensions of features cannot be reliably interpreted and images lose much of their evidential value. This field broadly supports data completeness and the practical utility of the image record. The form creator should consider whether a multi-select approach (the field already supports multiple magnifications) aligns with their documentation style.

 

Overall microstructure classification (as observed)
Recommendation: Requiring this field provides a structured, categorical summary of the dominant microstructure, which facilitates quick review and comparison across examinations. It anchors the detailed narrative description that follows and supports operational processing of records—for example, filtering records by microstructure type during batch reviews. The necessity of this requirement depends on the form creator's need for structured, searchable records.

 

Detailed description of the microstructure observed
Recommendation: Requiring this narrative field ensures the analyst records their detailed observations in their own words, capturing nuance that structured fields alone cannot convey. It supports data completeness by ensuring that no examination record is left without a substantive description of what was seen. This field is particularly valuable for later reviews, audits or comparisons where the reasoning behind the conclusion needs to be understood.

 

Were non-metallic inclusions observed?
Recommendation: Requiring this field ensures that inclusion assessment is explicitly addressed—either by recording inclusions observed or by noting their absence along with the basis for that determination. This supports data completeness by preventing the section from being silently skipped. If the form creator's examination scope does not always include inclusion assessment, they may wish to consider whether a mandatory gate question or an optional field better suits their workflow.

 

Narrative description of defects and anomalies
Recommendation: Requiring this field ensures that any defects or anomalies observed during the examination are described in detail, including location, morphology and possible origin. Even when no significant defects are found, a brief statement confirming this supports record completeness and prevents ambiguity. This field is central to the practical value of the examination record for quality tracking and potential root-cause analysis.

 

Overall examination outcome
Recommendation: Requiring this field provides a clear, categorical conclusion that serves as the primary takeaway from the examination. It supports operational processing by enabling quick assessment of whether the microstructure is consistent with expectations and whether further action is needed. The follow-up prompts for questionable or inconclusive outcomes further strengthen the record. The form creator should confirm that the five available outcome categories adequately cover their examination scenarios.

 

Analyst conclusion
Recommendation: Requiring this field ensures the analyst documents their reasoning, not just their observations. It captures the significance of the findings and the basis for the overall outcome. This supports record-keeping completeness and helps reviewers understand the thought process behind the conclusions, which is valuable when the record is revisited months or years later.

 

Analyst name
Recommendation: Requiring this field establishes accountability and traceability—who performed the examination. It is a standard record-control practice that supports internal quality processes and enables follow-up queries. The form creator should consider their data-handling practices for personal information when storing these records.

 

Examination date and time
Recommendation: Requiring this field provides a timestamp for the examination, supporting chronological record-keeping and traceability. It helps establish when observations were made, which can be relevant when correlating with other records or when assessing sample condition over time. Accurate date-time recording broadly supports orderly documentation practices.

 

Analyst signature
Recommendation: Requiring this signature serves as a formal confirmation by the analyst that the recorded entries reflect their observations. It supports record integrity and accountability within the form creator's documentation workflow. The form's introductory paragraph appropriately notes that signing does not guarantee results for other specimens or batches, which is a helpful and transparent caveat.

 

Overall Mandatory Field Strategy Recommendation

The form currently designates approximately seventeen fields as mandatory across its thirteen sections, which is a reasonable proportion given the form's overall length and complexity. The mandatory fields are well-distributed and tend to focus on core identification (specimen ID, material grade), critical preparation and examination parameters (sectioning method, polishing method, etching status, technique, magnification), key observations (microstructure classification, description, inclusions, defects), conclusions (overall outcome, analyst conclusion) and record control (name, date, signature). This distribution ensures that no section is left entirely without required data, supporting record completeness.

 

Balancing data depth against completion rates: Given the form's considerable length, care should be taken to ensure that the mandatory set does not create excessive friction, particularly for routine examinations. The current selection appears well-judged—requiring only fields that are practically essential for a meaningful examination record—while leaving many descriptive and supplementary fields optional. Form creators may wish to monitor completion times and user feedback to confirm that the mandatory set does not discourage thoroughness.

 

Conditional logic considerations: The form already makes effective use of conditional follow-ups (e.g. for specimen source, etching, hardness testing). Additional conditional logic could potentially be applied to sections like micro-hardness, which is already marked as optional in the section heading. Where a mandatory question has a "no" branch with further questions (e.g. etching status, inclusions), the design ensures the record is complete regardless of the path taken—this is an effective pattern that should be maintained.

 

Mandatory field placement: The mandatory fields are logically placed within their respective sections rather than clustered at the beginning or end, which encourages the analyst to complete the form in workflow order. The record-control fields (name, date, signature) appearing at the end is appropriate, as these serve as a final confirmation step.

 

Observations on scope: The form creator may wish to periodically review whether all currently mandatory fields are truly necessary for every examination type. For instance, if the form is sometimes used for preliminary or partial examinations, the strict requirement for fields like Overall examination outcome or Analyst conclusion may occasionally create difficulty. A practical approach is to retain these as mandatory but include clear placeholder guidance (e.g. "preliminary observations—final conclusion pending further examination") in the field descriptions. Overall, the current mandatory field strategy supports robust, traceable record-keeping without overburdening the analyst.

 

To configure an element, select it on the form.

To add a new question or element, click the Question & Element button in the vertical toolbar on the left.