Use this form to document an accelerated corrosion or salt spray exposure of coated metals, automotive components and protective finishes. Please complete every field as accurately as possible. Where a value is unknown, state "unknown" or "not measured" rather than leaving the field blank. The wording used here is neutral and general; always follow the specific method and acceptance criteria agreed for the test.
Test/project title
Internal test reference number
What is the primary purpose of this test?
Qualification of a new coating or finish
Incoming material or part quality check
Validation of a process change
Failure analysis or troubleshooting
Comparative evaluation of two or more options
Research and development study
Periodic surveillance or routine monitoring
Other purpose
Please list the variants being compared and the basis for comparison:
Please describe the purpose:
At which stage is this test being performed?
Material or product development
Pre-production/pilot
Routine production monitoring
Post-production verification
Analysis of a part returned from service
Please briefly describe the service environment and time in service:
Is this test being carried out to satisfy an agreed customer, contractual or internal specification?
Please state the specification, drawing or requirement reference:
What is driving the decision to test?
Internal quality initiative
Suspected performance issue in service
Supplier or material change
Curiosity/background knowledge building
Requested test start date
Requesting department or contact person
Background, known history or specific questions this test should answer:
Testing laboratory/facility name
Facility location (city/region)
Lead test engineer/technician
Contact e-mail
Contact telephone
Date and time this form was opened
Has the assigned operator been trained or briefed on the chamber and the selected method?
Please record the training or briefing reference and date:
Please describe the supervision arrangements and who is responsible for the test:
Will more than one person be involved in inspections and recording?
Please name the additional personnel and their roles:
A single named person remains responsible for consistency of ratings across all inspection intervals.
Identify every specimen placed in the chamber. A traceable sample identifier should be applied in a way that survives the exposure (for example, engraved, stamped or applied with a resistant marker in a non-evaluated area).
Specimen list
Include in exposure | Sample ID/marking | Part description | Substrate material/grade | Substrate thickness (mm) | Coating thickness (micrometre) | Batch/lot number | Date received | ||
|---|---|---|---|---|---|---|---|---|---|
A | B | C | D | E | F | G | H | ||
1 | SS-001 | Flat test panel, 100 x 150 mm | Cold rolled carbon steel | 1.5 | 62 | L-2291 | 2/10/2027 | ||
2 | SS-002 | Coated fastener, M8 | Case hardened steel | 8 | 18 | L-2291 | 2/10/2027 | ||
3 | SS-003 | Retained reference panel (not exposed) | Cold rolled carbon steel | 1.5 | 62 | L-2291 | 2/10/2027 | ||
4 | |||||||||
5 | |||||||||
6 | |||||||||
7 | |||||||||
8 | |||||||||
9 | |||||||||
10 |
Total number of specimens placed in the chamber
Which substrate families are represented in this test?
Carbon steel/low alloy steel
Stainless steel
Cast iron
Aluminium or aluminium alloy
Zinc or zinc alloy (including die cast)
Copper, brass or bronze
Magnesium alloy
Other metallic substrate
Non-metallic with a metallized or coated surface
What is the general specimen geometry?
Flat panels
Fasteners or small hardware
Formed or curved parts
Assembled components with joints
Tubular or hollow sections
Mixed geometry
Please describe the joint, crevice or contact configuration and how it is oriented in the chamber:
Please list the geometries included and their quantities:
Were the specimens subjected to any pre-test preparation (cleaning, degreasing, abrasion, conditioning)?
Which pre-test preparation steps were applied?
Solvent wipe or degreasing
Aqueous cleaning/alkaline wash
Abrasion or light sanding
Solvent wipe or vapour degreasing with a drying hold
Conditioning at controlled temperature and humidity
Chemical pre-treatment or activation
Other step
Please describe the additional preparation step:
Specimens are tested in the as-received condition. Note any surface contamination or handling marks observed before exposure.
Was a scribe line, scratch or deliberate defect introduced to any specimen to assess undercutting or creepage?
Please describe the scribe tool, geometry, width and position on each specimen type:
No deliberate defect was introduced. Evaluation will focus on intact coating surfaces, edges and any natural features such as recesses or holes.
Cut edges, back faces and non-evaluated areas have been sealed or masked as required by the agreed method
How are specimens positioned in the chamber?
Vertical, facing the spray in a rack
Vertical, back-to-back in pairs
Inclined at a defined angle to the vertical
Laid flat on supports
Mounted on a purpose-built fixture
Please state the angle used:
Please describe the fixture and how it avoids contact marks or shadowing:
Are any reference or control specimens being exposed alongside the test specimens?
Please describe the reference specimens and their expected behaviour:
Without a reference specimen, results are interpreted comparatively between the specimens included in this exposure only.
Record the coating system as precisely as possible. For multi-layer systems, list the layers in order from the substrate outward and include nominal thicknesses.
Which coating or finish types are being evaluated?
Liquid-applied paint/lacquer
Powder coating
Electrodeposited coating (e-coat)
Hot-dip metallic coating
Electroplated metallic coating
Conversion or passivation layer
Anodic or chemical oxide layer
Thermal spray or metallized layer
Organic-inorganic hybrid or sol-gel layer
Temporary preservative/corrosion preventive
Other type of finish
Please record the powder coating type, thickness and cure schedule applied:
Please record the plated metal or alloy, thickness and any sealers or topcoats applied:
Please describe the finish:
Coating product designation or trade description (as supplied to you)
Nominal dry film thickness (micrometre)
Measured dry film thickness, minimum reported value (micrometre)
Measured dry film thickness, maximum reported value (micrometre)
How was coating thickness determined?
Magnetic induction gauge
Eddy current gauge
X-ray fluorescence
Cross-section microscopy
Gravimetric/mass difference
Step height measurement
Not measured
Other method
Is the coating system made up of multiple layers?
Layer build-up from substrate outward
Layer number | Layer/material description | Nominal thickness (micrometre) | Application method | Cure/drying condition | ||
|---|---|---|---|---|---|---|
A | B | C | D | E | ||
1 | 1 | Pretreatment/conversion layer | 0.5 | Immersion | Air dried 20 min | |
2 | 2 | Primer coat | 35 | Spray | 30 min at 140 C | |
3 | 3 | Topcoat | 45 | Spray | 25 min at 80 C | |
4 | ||||||
5 | ||||||
6 | ||||||
7 | ||||||
8 | ||||||
9 | ||||||
10 |
A single-layer coating system is recorded. Note any sealers, waxes or temporary protectives applied after coating.
Number of coats applied (excluding pretreatment)
Date the coating was applied
Coating applicator/supplier and batch reference
Was the specified cure or drying schedule reported as fully achieved?
Yes, reported as fully achieved
Partially achieved (deviation noted)
No, deviation occurred
No cure schedule was specified
Unknown
Please describe the deviation and its likely effect on the coating:
Please describe what occurred and how it was handled:
Please rate the general condition of the coating before exposure
Poor | Below expectation | Acceptable | Good | Very good | Not assessed | |
|---|---|---|---|---|---|---|
Surface appearance is uniform across the evaluated area | ||||||
Coating is free from visible craters, runs or inclusions | ||||||
Coating is free from visible cracking or crazing | ||||||
Adhesion appears sound at edges and scribes | ||||||
Colour and gloss appear consistent between specimens |
Any pre-exposure defects, handling damage or features that could influence the results:
Select the method agreed for this exposure and record the edition or revision used. Names of published methods are listed only for identification; the responsible party should confirm which method and acceptance criteria apply to the product being tested.
Which salt spray/accelerated corrosion method is being followed?
Neutral salt spray (continuous)
Acetic acid salt spray
Copper-accelerated acetic acid salt spray
Acidified synthetic seawater spray
Cyclic corrosion exposure with salt spray steps
Prohesion-type cyclic exposure
Company or internal method
Customer-specified method
Other method
Please describe the cycle: spray, dry and humidity steps with their durations and transitions:
Please summarise the internal method, its conditions and where it is documented:
Please describe the method and its source:
Method designation, edition or revision year used
Is the test method prescribed by an external party (customer, drawing, supply agreement)?
Please state the document reference and clause or section:
On what basis was the method selected?
Commonly used for this coating family
Matches expected service exposure
Chosen to accelerate comparison between options
Availability of the chamber and equipment
Recommendation of the coating supplier
Are additional or complementary exposures planned alongside this test?
None at this time
Neutral humidity exposure
Cyclic temperature and humidity
Ultraviolet light and condensation exposure
Immersion or splash testing
Cabinet-free natural weathering
Mechanical testing after exposure (impact, bend, adhesion)
Chemical or electrochemical analysis
Other complementary test
The chamber is dedicated to this test method for the duration of the exposure (no mixed-method use)
Are acceptance criteria defined for this test?
Please state the acceptance criteria (for example maximum allowed rust, blistering, creepage or time to first appearance):
No formal acceptance criteria are defined. Results will be reported descriptively and, where relevant, compared with previous exposures of similar products.
Record the actual set points and measured conditions at the start of the exposure. Small differences in temperature, solution concentration, pH or collection rate can noticeably affect how quickly corrosion develops, so note the values measured rather than only the intended ones.
Chamber identifier/asset number
Chamber type and approximate internal volume
Chamber temperature set point (degrees Celsius)
Chamber temperature, measured at start (degrees Celsius)
Permitted temperature variation (plus/minus degrees Celsius)
Salt solution concentration (% by mass)
Which salt or salt blend is used in the solution?
Sodium chloride (single salt)
Sodium chloride with additions specified by the method
Synthetic seawater formulation
Ammonium chloride/ammonium sulphate based solution
Other salt system
Please list the additions and their concentrations:
Please describe the salt system and preparation procedure:
Water quality used to prepare the solution
Deionised water
Distilled water
Reverse osmosis water
Low-mineral potable water
Other water type
Please describe the water type and its conductivity if known:
Measured solution pH at start of test
Was the solution pH adjusted before the test began?
Please record the substance used for adjustment, the amount added and the resulting pH:
The solution was used as prepared, without pH adjustment. Record any drift in pH observed at later inspections.
Atomising air pressure recorded at the spray nozzle
Solution collection rate, average (millilitre per hour per 80 square centimetre)
Number of collectors placed inside the chamber
Planned test start date and time
Was the salt solution prepared fresh for this exposure?
Date and time the solution was prepared
Please describe the age, storage and condition of the solution used:
Solution preparation calculation
Solution component | Target concentration (gram per litre) | Solution volume prepared (litre) | Required mass (gram) | Mass actually weighed (gram) | ||
|---|---|---|---|---|---|---|
A | B | C | D | E | ||
1 | Sodium chloride | 50 | 20 | 1000 | 1000.2 | |
2 | pH adjustment substance (if used) | 0 | 20 | 0 | 0 | |
3 | ||||||
4 | ||||||
5 | ||||||
6 | ||||||
7 | ||||||
8 | ||||||
9 | ||||||
10 |
Was the chamber pre-conditioned or run empty before loading the specimens?
Please state the pre-conditioning period and any observations:
Specimens were loaded directly. Note any delay between solution preparation, loading and stable conditions.
Plan the inspection intervals in advance so that ratings remain comparable across the exposure. Record planned and actual times; where an inspection is missed, note the reason in the log below.
Planned total exposure duration (hours)
Planned total exposure duration (days)
Planned end date of exposure
Which inspection intervals are planned? (select all that apply)
24 hours
48 hours
72 hours
96 hours
168 hours (1 week)
240 hours
336 hours (2 weeks)
500 hours
672 hours (4 weeks)
720 hours
1000 hours
End of exposure only
May specimens be temporarily removed from the chamber for inspection and photography?
Please state the maximum permitted removal period and any drying or rinsing step agreed before inspection:
How will condition be assessed if specimens remain in the chamber?
Visual check through the chamber viewing window
Photography through the viewing window
Assessment at the end of exposure only
Other approach
Photographs will be taken at every scheduled inspection interval
The same lighting, background and camera position will be used for all photographs
Planned inspection schedule
Inspection number | Planned date | Actual date | Cumulative exposure at inspection (hour) | Responsible person | Photos captured | Focus of this inspection | ||
|---|---|---|---|---|---|---|---|---|
A | B | C | D | E | F | G | ||
1 | 1 | 3/2/2027 | 3/2/2027 | 24 | Lead engineer | Initial appearance check, scribe condition | ||
2 | 2 | 3/4/2027 | 3/4/2027 | 96 | Lead engineer | First signs of white rust or blistering | ||
3 | 3 | 3/9/2027 | 3/9/2027 | 336 | Lead engineer | Mid-test rating and creepage measurement | ||
4 | 4 | 3/23/2027 | 3/23/2027 | 672 | Lead engineer | Mid-test rating and creepage measurement | ||
5 | 5 | 4/13/2027 | 4/13/2027 | 1000 | Lead engineer | Final rating, photographic record and summary | ||
6 | ||||||||
7 | ||||||||
8 | ||||||||
9 | ||||||||
10 |
Is the exposure likely to be extended beyond the planned duration?
Please describe the conditions under which the test would be extended and the maximum additional duration:
The exposure is planned to end at the stated duration. Any change should be documented in the deviations section.
Is there a defined stopping criterion (for example a specific failure appearance) rather than a fixed duration?
Please describe the stopping criterion:
The test will run for the planned duration regardless of the appearance of the specimens.
Rate the corrosion appearance using the scale defined in the agreed method where one exists. If no scale is defined, use the descriptive options below consistently for every inspection and every specimen so that results remain comparable.
Is a formal rating scale defined in the method or specification being used?
Please state the rating scale or classification system used:
The descriptive scales in this section will be used instead. Record the same descriptors at every interval.
Inspection being recorded (interval number and cumulative hours)
Overall corrosion appearance of the evaluated area
No visible change
Trace change, fraction of area below 0.1%
Very slight change, 0.1% to 0.5% of area
Slight change, 0.5% to 1% of area
Moderate change, 1% to 5% of area
Severe change, more than 5% of area
Not assessable
Please rate each observed corrosion feature
None | Trace | Slight | Moderate | Severe | Complete failure | Not applicable | |
|---|---|---|---|---|---|---|---|
Red or brown rust on ferrous areas | |||||||
White corrosion products on zinc or aluminium based coatings | |||||||
Dark staining or discoloration of the surface | |||||||
Filiform or thread-like corrosion under the coating | |||||||
Creepage or undercutting from the scribe line or defect | |||||||
Corrosion at edges, holes or recessed features | |||||||
Loss of gloss, chalking or erosion of the topcoat | |||||||
Cracking, peeling or lifting of the coating |
Was the scribe line or deliberate defect evaluated for creepage or undercutting?
Maximum creepage or undercutting measured from the scribe (millimetre)
No scribe evaluation was performed at this inspection.
How was creepage or undercutting measured?
Direct measurement with a graduated scale or loupe
Measurement from calibrated photographs
Optical microscope measurement
Visual comparison with reference images
Not measured
Overall condition rating for the specimen set at this inspection (1 = very poor, 10 = as new)
Subjective overall appearance score for reporting purposes
Where on the specimen is corrosion most pronounced?
Centre of the flat face
Along edges and corners
Around holes, threads or recesses
Along the scribe line or defect
Under contact points or supports
Areas of lower coating thickness
Uniformly distributed
None observed
Approximate percentage of evaluated area affected by visible corrosion
Free-text observations for this inspection (any unusual patterns, asymmetry, chamber-related effects):
Blistering is recorded separately from general corrosion because it often indicates a coating adhesion or osmotic mechanism rather than simple substrate corrosion. Note the density and approximate size of blisters, and describe their distribution across the evaluated surfaces.
Has any blistering been observed at this inspection?
How would you describe the blister density in the affected area?
Few blisters, widely scattered
Medium density, several blisters per area
Dense, most of the area affected
Very dense, blisters merging into large areas
No blistering observed at this inspection. Continue to monitor at later intervals, since blistering can appear after extended exposure.
Which blister sizes are present? (select all that apply)
Very small, pinpoint size (below about 1 mm)
Small (roughly 1 mm)
Medium (roughly 1 to 3 mm)
Large (roughly 3 to 5 mm)
Very large (greater than about 5 mm)
Not applicable, no blistering
Blistering by area of the specimen
None | Few | Medium density | Dense | Very dense | |
|---|---|---|---|---|---|
Main flat or exposed face | |||||
Reverse face or protected face | |||||
Edges and corners | |||||
Around the scribe line or defect | |||||
Around holes, threads or recessed features | |||||
Under contact points or supports |
Have any blisters ruptured or lifted to expose the underlying surface?
Please describe the exposed underlayer and the approximate extent of rupture:
Blisters remain intact. Avoid handling the blistered area and photograph before any further handling.
Does the blistering appear to be concentrated in a particular way?
Uniformly across the surface
Localized near edges or defects
Localized around contact or support points
Localized in areas of lower film thickness
Localized in areas of higher film thickness
Not possible to determine
Blistering has been rated using the classification defined in the referenced method
Description of blister distribution, appearance and any suspected cause:
Photographs are the primary visual record of the exposure. Include a consistent background, even lighting and, where possible, a scale or reference marker in the frame. Capture the same views at each inspection so that changes can be compared over time.
Overall view of specimen set before exposure (each specimen marked with its identifier)
Overall view of each specimen at this inspection
Close-up of the scribe line, defect or worst-affected area
Close-up of blistering, if present
View of the chamber interior, specimen arrangement and collectors during the exposure
What equipment was used to capture the images?
Digital camera
Mobile device camera
Microscope or borescope camera
Fixed imaging station in the laboratory
Other equipment
Image file references or naming convention used
Was a scale, ruler or reference marker included in the close-up photographs?
Please state the scale used and its calibration status:
Photographs without a scale can still support the record; note the approximate field of view instead.
Were any non-photographic measurements taken (film thickness, gloss, colour, mass)?
Please list the measurements, instruments used and the results:
Evaluation at this inspection is based on visual assessment and photography only.
Attach the inspection log, raw data sheet or measurement export for this test
Attach chamber verification, calibration or maintenance records used to support the test
Attach any relevant specifications, drawings or requirement documents
All photographic and documentary evidence has been stored in the agreed location for this test record
Chamber conditions should be checked at regular intervals during the exposure. Log the readings below and flag any value outside the intended range so that the effect on the results can be considered.
Chamber condition log
Log date | Chamber temperature (degrees Celsius) | Measured solution pH | Collection rate (millilitre per hour) | Within intended range | Notes and action taken | ||
|---|---|---|---|---|---|---|---|
A | B | C | D | E | F | ||
1 | 3/2/2027 | 35 | 6.9 | 1.6 | Start of exposure, conditions stable | ||
2 | 3/4/2027 | 35 | 6.8 | 1.5 | Top-up of reservoir with prepared solution | ||
3 | 3/9/2027 | 34.5 | 7.1 | 1.7 | Nozzle cleaned before reading | ||
4 | |||||||
5 | |||||||
6 | |||||||
7 | |||||||
8 | |||||||
9 | |||||||
10 |
Were any deviations from the intended test conditions recorded during the exposure?
Please describe each deviation: what happened, when it was noticed, how long it lasted and what corrective action was taken:
No deviations were recorded. Continue routine monitoring until the exposure ends.
In your judgement, how might any deviation affect the interpretation of the results?
No expected effect
Minor effect, results remain broadly comparable
Possible effect, interpret with caution
Significant effect, results may not be comparable
Not possible to determine
Was the chamber interrupted at any point (power loss, extended door opening, equipment fault)?
Please describe the interruption, its duration and how the exposure was resumed:
The exposure ran continuously without interruption.
What is the current verification/calibration status of the measuring equipment used?
Valid and current at the time of the test
Valid but due for verification soon
Overdue for verification
Not verified
Unknown
Please describe the situation and any risk this may introduce to the results:
Please describe what is known about the equipment history:
Date of the most recent chamber verification or check
Where the evaluation includes mass loss measurements, record the masses and exposed area below. The corrosion rate column is calculated automatically from mass loss, exposed area and exposure time and is intended only as a convenient summary of the recorded numbers.
Where CR is the corrosion rate in milligram per square centimetre per day, delta m is the mass loss in gram, A is the exposed area in square centimetre and t is the exposure time in hour.
Mass loss measurements
Sample ID | Initial mass (gram) | Final mass after cleaning (gram) | Mass loss (gram) | Exposed area (square centimetre) | Exposure time (hour) | Corrosion rate (milligram per square centimetre per day) | ||
|---|---|---|---|---|---|---|---|---|
A | B | C | D | E | F | G | ||
1 | SS-001 | 125.432 | 125.318 | 0.114 | 45.2 | 1000 | 6.101 | |
2 | SS-002 | 12.184 | 12.171 | 0.013 | 9.8 | 1000 | 3.184 | |
3 | ||||||||
4 | ||||||||
5 | ||||||||
6 | ||||||||
7 | ||||||||
8 | ||||||||
9 | ||||||||
10 |
How were corrosion products removed before final weighing?
Mechanical cleaning only (brushing, wiping)
Chemical cleaning with a specified solution
Combined mechanical and chemical cleaning
Ultrasonic cleaning
Not applicable, mass loss not measured
Please describe the cleaning solution, concentration, temperature and duration used:
Unexposed reference coupons were weighed and cleaned in the same way to account for cleaning losses
This section records the handling and disposal arrangements applied during the test. It does not replace the safety procedures, instructions or risk assessments that apply at your site; always follow the local requirements and the safety information supplied with the materials used.
Which protective items were used while handling specimens and solution?
Eye protection
Protective gloves
Protective clothing/laboratory coat
Face shield
Respiratory protection
Heat-resistant gloves for hot surfaces
Other protective item
Which hazards were identified for this test?
Corrosive or irritant salt solution
Compressed air/pressurised equipment
Hot surfaces and hot solution
Electrical equipment
Heavy or sharp specimens
Atomised mist or aerosol
No significant hazard identified
Other hazard
Please describe the additional hazard and how it is controlled:
Safety information for the salts, cleaning agents and coating materials used has been reviewed before starting
Was the spent salt solution disposed of in accordance with local site practice?
Please state the disposal route or arrangement used:
Please describe how the solution was handled and who has been informed:
Are there any environmental or handling concerns arising from this exposure that should be recorded?
Please describe the concern and any action taken or recommended:
No additional concerns are noted for this exposure.
Summarise what the exposure showed and how it relates to the purpose stated at the start of the form. Keep observations separate from interpretation so that readers can reach their own conclusions from the recorded data.
Summary of observations across the full exposure (in chronological order)
Comparison with the acceptance criteria stated earlier, if any
Overall outcome recorded for this test
Meets the stated requirements
Meets requirements with observations to note
Does not meet the stated requirements
Inconclusive
Outcome not yet determined, exposure continues
Please describe which requirements were not met, with reference to the recorded observations:
Please describe why the result cannot be concluded and what additional information would help:
Please state the planned end date or next decision point:
Which factors do you consider most relevant to the observed behaviour?
Coating type or formulation
Coating thickness or uniformity
Pretreatment or surface preparation
Cure or drying conditions
Substrate material or condition
Specimen geometry, edges or joints
Test conditions or chamber performance
Specimen handling or preparation for test
Not possible to determine from this exposure
Is a repeat or extended test recommended?
Please describe the proposed repeat or extension, its purpose and the specimens involved:
No repeat exposure is recommended on the basis of the current results.
Recommended follow-up activities (select all that apply)
Review coating formulation or product selection
Review pretreatment and cleaning process
Review cure schedule or film thickness targets
Extend exposure duration
Additional analysis (microscopy, film thickness mapping, adhesion testing)
Supplier or process review
Update internal guidance or work instructions
No follow-up required
Limitations of this test and cautions for anyone reusing the results:
Recorded cost of this test (if tracked)
Please review the completed record before signing. By signing, the named person confirms that the entries reflect the observations and measurements recorded during the test as understood at the time of signing.
Name of person completing the form
Role or job title
Signature of person completing the form
Date of completion
Name of reviewer/approver
Role or job title of reviewer
Signature of reviewer/approver
Date of review
I have checked that the sample identifiers, test conditions, inspection entries and photographic references in this record are complete and internally consistent
Do you approve release of these results to the requesting party?
Please state the report or release reference under which the results are issued:
Please describe what needs to be resolved before the results can be released:
Would you like the results to be retained for future comparative work?
Please state the retention period and archive location:
The record will be handled in line with the normal record-keeping practice for this type of test.
Any final comments, caveats or acknowledgements:
Analysis for Salt Spray & Accelerated Corrosion Test Record Form
Important Note:
This analysis provides strategic insights to help you get the most from your form's submission data for powerful follow-up actions and better outcomes.
AI-Generated Content: This template and its accompanying guidance are AI-generated to provide a practical starting point for your form-building needs. Please review and customise the content to ensure it is accurate, appropriate and suitable for your intended use.
This guide is provided for general informational and planning purposes only. It does not constitute professional, legal, financial, medical, employment, privacy, regulatory, or advice of any other kind, nor does it certify that this template is suitable or compliant for any particular jurisdiction or purpose.
Laws, regulations, industry practices and business requirements vary. You are responsible for reviewing and customising the template to suit your intended use and obtaining advice from appropriately qualified professionals where necessary.
Please delete this section before publishing your form. See our Terms of Service for further information.
This form provides a comprehensive, structured record for documenting accelerated corrosion and salt spray testing of coated metals, automotive parts and protective finishes. Its greatest strength is the logical progression from test planning through specimen identification, method selection, chamber setup, exposure monitoring, visual rating, photographic evidence and final sign-off. The form separates observation from interpretation, includes conditional follow-up logic that collects detail only when relevant, and incorporates automated calculation fields for mass loss and corrosion rate. This design supports traceable, internally consistent test records and reduces ambiguity in how results should be read by others.
The opening section establishes the administrative and contextual foundation for the test. The instructional paragraph sets clear expectations about completing fields accurately and referencing the agreed method. Test/project title provides a human-readable label for quick reference across documents and archives. Internal test reference number creates a unique identifier for traceability. What is the primary purpose of this test? uses a well-structured single-choice list covering qualification, quality checking, process validation, failure analysis, comparison, research and surveillance, with intelligent follow-up prompts for the comparative and 'Other' options. At which stage is this test being performed? contextualises the results within a product lifecycle. Is this test being carried out to satisfy an agreed customer, contractual or internal specification? uses a yes/no gate with branching follow-ups to capture either the specification reference or the driving reason. Requested test start date and Requesting department or contact person support scheduling and ownership. The free-text field Background, known history or specific questions this test should answer is optional, which is appropriate since not every test has a detailed background narrative.
This section documents who is conducting the test and where. Testing laboratory/facility name and Lead test engineer/technician establish accountability. The form wisely includes a yes/no question about operator training (Has the assigned operator been trained or briefed on the chamber and the selected method?) with branching to record either training details or supervision arrangements. The optional multi-person inspection question with its follow-up for naming additional personnel supports consistency of ratings.
The specimen list table is well-designed with columns for sample ID, part description, substrate, thicknesses, batch and date received. The Include in exposure checkbox column allows retained reference specimens to be listed but excluded. Total number of specimens placed in the chamber provides a quick cross-check. Substrate family and geometry questions use multi-choice and single-choice formats with contextual follow-ups for joints and mixed geometries. Pre-test preparation, scribe line introduction and masking questions all use the yes/no pattern with appropriate branching. The checkbox confirming that cut edges and non-evaluated areas have been sealed ensures a critical preparation step is acknowledged.
The coating section captures multi-layer systems through a dedicated table with layer descriptions, nominal thicknesses, application methods and cure conditions. Nominal dry film thickness (micrometre) is separated from measured minimum and maximum values, which is good data hygiene practice. The pre-exposure condition matrix rating across five sub-questions provides a valuable baseline for later comparison. The cure schedule question includes a five-option scale with follow-ups for partial or non-achieved cure, capturing deviations that may affect results.
The method selection question offers nine common accelerated corrosion method types with branching detail for cyclic, internal and other methods. The inclusion of Method designation, edition or revision year used ensures the specific revision is documented. The question about whether the method is prescribed externally distinguishes between mandated and self-selected approaches. The checkbox about chamber dedication during the exposure supports method integrity.
This section records both set points and measured values, which is critical given how small condition variations can affect corrosion development. Temperature, concentration, pH, collection rate and collector count are all captured numerically. The solution preparation calculation table is particularly effective, with a formula column computing required mass from concentration and volume. The fresh-solution question with branching for preparation date or solution age adds practical traceability.
Planned duration in hours with an automatically calculated days value supports straightforward scheduling. The multi-choice inspection interval selector covers common intervals from 24 hours to 1000 hours. The planned inspection schedule table with columns for planned and actual dates, cumulative hours, responsible person, photo capture and inspection focus is an excellent tool for ensuring consistent, comparable ratings. Checkboxes for photographing at every interval and using consistent lighting demonstrate attention to evidence quality.
The overall corrosion appearance rating uses a descriptive seven-point scale with percentage-of-area ranges, which is practical when a formal rating scale is not specified. The matrix rating of eight corrosion features across six severity levels captures nuance. Creepage measurement from the scribe is collected with a numeric field and a measurement method question. Additional fields for overall condition rating (1–10 digit scale), subjective appearance score (star rating), location of most pronounced corrosion and estimated area affected provide complementary quantitative and qualitative data.
Blistering is correctly separated from general corrosion due to its different mechanisms. The density, size distribution, area-based matrix rating, rupture status and concentration pattern fields provide a thorough picture. The follow-up for ruptured blisters includes a practical instruction to photograph before further handling. The checkbox referencing the classification in the method maintains consistency with the selected standard.
The image upload fields cover pre-exposure, per-specimen, scribe close-up, blister close-up and chamber interior views. The naming convention field, scale inclusion question and equipment identification support image management and interpretability. File upload fields for inspection logs, calibration records and specification documents consolidate the supporting documentation.
The chamber condition log table with date, temperature, pH, collection rate, range compliance and notes is a practical monitoring tool. The deviations question with a detailed description prompt ensures any interruptions are documented. The judgement question about how deviations affect interpretation adds an important interpretive layer. Calibration status with follow-ups for overdue or unverified equipment supports data reliability awareness.
The corrosion rate equation is displayed in a readable format and the calculation table includes automated mass loss and corrosion rate columns. The cleaning method question captures how corrosion products were removed, which affects comparability. The checkbox for unexposed reference coupons accounts for cleaning losses.
This section documents protective equipment, identified hazards, safety information review and solution disposal. The introductory paragraph correctly notes that the form does not replace site safety procedures. The disposal question uses yes/no branching to capture either the disposal route or a description of how the solution was handled.
The chronological observation summary, comparison with acceptance criteria, overall outcome with five options and branching follow-ups for failures or inconclusive results support clear reporting. The factors-considered multi-choice, repeat test recommendation, follow-up activities and limitations fields provide actionable next steps.
The sign-off section includes dual signatures (completer and reviewer), a consistency check checkbox, result release approval with branching and an optional retention question. This ensures quality review before results are shared.
The form collects a broad set of structured and unstructured data: identifiers, numeric conditions, categorical ratings, photographic evidence and narrative observations. The tabular formats and numeric fields support comparison across tests and over time. Photographic evidence with consistent naming conventions provides a visual record that complements numeric data. Basic privacy considerations apply to personnel names and contact details, which are collected for accountability purposes; these should be handled in line with the organisation's normal data practices.
The form is logically ordered and uses consistent question patterns (yes/no with branching, single-choice with follow-ups) that reduce cognitive load. Conditional follow-ups mean users are not asked for irrelevant detail. The instructional paragraphs at the start of key sections provide context without overwhelming the user. However, the form is extensive, covering 13 sections; users may benefit from the ability to save and return to complete it over time, particularly since inspection entries are made at multiple intervals. Numeric fields with units in their labels reduce ambiguity. Placeholder text provides helpful examples throughout.
Key strengths include the comprehensive coverage of the test lifecycle, intelligent conditional logic, automated calculations, separation of observation from interpretation, and dual sign-off with a consistency check. The form's tabular structures (specimen list, layer build-up, inspection schedule, chamber log, mass loss) are well-suited to the structured nature of laboratory testing. Areas for potential improvement include: the form could clarify whether it is intended to be completed in a single session or progressively updated as the exposure proceeds (the inspection sections suggest the latter, but this is not stated explicitly); the optional cost field at the end could be paired with a note about what costs are tracked; and a brief glossary or reference appendix listing the descriptive rating scales in one place might assist users who complete only the rating sections. Overall, this is a well-designed, operationally thorough form that supports reliable recording of accelerated corrosion testing.
Mandatory Question Analysis for Salt Spray & Accelerated Corrosion Test Record Form
Important Note:
This section explains why certain fields in this form are marked as required and provides general guidance on how these requirements may support the collection of complete, accurate and relevant information.
Required fields and information-collection obligations may vary depending on your industry, jurisdiction, business operations and intended use of the form. A field marked as required in this template does not necessarily mean that collecting the information is legally mandatory.
Please review each required field to determine whether it is necessary, appropriate and lawful for your particular purpose. Consider applicable privacy, data protection, consent and industry-specific requirements, and consult an appropriately qualified legal, privacy or compliance professional where necessary.
Please delete this section before publishing your form. See our Terms of Service for further information.
Test/project title
Recommendation: Requiring a project title ensures that each test record can be quickly identified and distinguished from other records in an archive or database. This is a practical requirement for record-keeping and retrieval. Whether a formal or informal title is needed depends on the organisation's naming conventions.
Internal test reference number
Recommendation: A reference number creates a unique, traceable link between this form and related documents such as specifications, correspondence or subsequent reports. It supports data management and reduces the risk of records being confused or duplicated. Form administrators should confirm whether the numbering follows a specific internal convention.
What is the primary purpose of this test?
Recommendation: Capturing the test purpose at the outset helps anyone reviewing the record understand the context and interpret the results appropriately. It also supports reporting and prioritisation. Requiring this field is consistent with the form's goal of producing a self-explanatory test record.
Is this test being carried out to satisfy an agreed customer, contractual or internal specification?
Recommendation: This question determines whether formal acceptance criteria apply and triggers appropriate follow-up questions. Requiring it ensures that the record captures whether the test is driven by an external requirement or an internal decision, which affects how results should be interpreted and reported.
Requested test start date
Recommendation: A planned start date supports scheduling, resource allocation and timeline tracking. Requiring it helps ensure the test is planned before execution begins. Its necessity may vary depending on whether scheduling is managed elsewhere.
Requesting department or contact person
Recommendation: Identifying the requester establishes ownership and a point of contact for follow-up questions. It supports administrative processing and accountability. The level of detail needed (department vs. named individual) depends on the organisation's practices.
Testing laboratory/facility name
Recommendation: Recording the facility name supports traceability of where the test was performed, particularly if multiple locations are involved. It is a practical element of a complete test record.
Lead test engineer/technician
Recommendation: Naming the lead engineer or technician establishes clear accountability for the test execution and data recording. This supports consistency of ratings and provides a contact for questions about the record. Its importance depends on the organisation's quality management practices.
Has the assigned operator been trained or briefed on the chamber and the selected method?
Recommendation: This question supports operational readiness and helps ensure consistent test execution. The branching follow-up captures either training details or supervision arrangements, which is proportionate for a technical test record. It is an internal quality measure rather than a universally mandated requirement.
Total number of specimens placed in the chamber
Recommendation: Recording the specimen count provides a quick cross-check against the specimen list table and helps verify that the test record is complete. It supports data completeness and inventory tracking of items in the chamber.
Were the specimens subjected to any pre-test preparation (cleaning, degreasing, abrasion, conditioning)?
Recommendation: Pre-test preparation can significantly influence corrosion behaviour, so documenting whether any was performed supports accurate interpretation of results. The yes/no gate with branching detail collects the right level of information for each scenario.
Was a scribe line, scratch or deliberate defect introduced to any specimen to assess undercutting or creepage?
Recommendation: This question determines whether creepage evaluation will be relevant and triggers related follow-ups in the inspection section. Requiring it ensures the defect status is documented before exposure begins, which is operationally important for consistent rating later.
Cut edges, back faces and non-evaluated areas have been sealed or masked as required by the agreed method
Recommendation: This checkbox acknowledges a preparation step that affects how results should be interpreted. Requiring confirmation ensures the preparer has considered and addressed edge and back-face exposure. Its strictness should be aligned with the agreed method's requirements.
Nominal dry film thickness (micrometre)
Recommendation: Coating thickness is a key variable in corrosion performance. Capturing the nominal value establishes the expected condition and supports comparison with measured values. This is a practical data point for evaluating whether observed performance is consistent with the intended coating specification.
Is the coating system made up of multiple layers?
Recommendation: This question determines whether a detailed layer table is needed or whether a single-layer description suffices. Requiring the answer ensures the coating system is documented at the appropriate level of detail.
Which salt spray/accelerated corrosion method is being followed?
Recommendation: The test method determines the conditions, duration and rating approach. Recording it is fundamental to producing a meaningful, interpretable test record. The branching follow-ups capture additional detail for less standardised methods.
Method designation, edition or revision year used
Recommendation: Method editions and revisions can affect test conditions and acceptance criteria. Recording the specific edition supports traceability and ensures results can be compared with tests performed to the same revision.
Are acceptance criteria defined for this test?
Recommendation: Knowing whether acceptance criteria exist determines how the results will be evaluated and reported. The branching follow-up either captures the criteria or notes that results will be descriptive. Requiring this question supports clear outcome determination.
Chamber identifier/asset number
Recommendation: Recording the chamber identifier links the test record to specific equipment and its calibration history. This supports operational traceability and helps identify any chamber-specific effects on results.
Chamber temperature set point (degrees Celsius)
Recommendation: Temperature is a primary test condition that directly affects corrosion rate. Capturing the set point establishes the intended condition and supports comparison with measured values. This is essential for interpreting the results.
Salt solution concentration (% by mass)
Recommendation: Solution concentration is another key test parameter. Recording it supports reproducibility and helps identify any condition variations that may have affected results. Whether a specific concentration is required depends on the selected method.
Planned test start date and time
Recommendation: The start date and time anchor all exposure duration calculations and inspection scheduling. Requiring it ensures that cumulative exposure hours can be accurately tracked throughout the test.
Was the salt solution prepared fresh for this exposure?
Recommendation: Solution freshness and condition can affect the consistency of the test environment. This question with branching follow-ups captures either the preparation time or the age and storage conditions of reused solution. It is an operational quality measure.
Planned total exposure duration (hours)
Recommendation: The planned duration establishes the scope of the exposure and drives scheduling, inspection planning and the corrosion rate calculation. Requiring it ensures the test has a defined endpoint before it begins.
May specimens be temporarily removed from the chamber for inspection and photography?
Recommendation: This question determines the inspection approach and whether specimens may be disturbed during the exposure. Requiring the answer ensures the inspection method is agreed before testing begins and is documented for reference.
Is a formal rating scale defined in the method or specification being used?
Recommendation: This question determines which rating approach will be used for corrosion assessment. The branching follow-up either captures the scale reference or confirms that the descriptive scales in the form will be used. Requiring it ensures consistency in how results are recorded.
Inspection being recorded (interval number and cumulative hours)
Recommendation: Identifying the inspection interval ensures each rating entry can be associated with a specific point in the exposure timeline. This is essential for tracking progression of corrosion over time and for comparing results across inspections.
Overall corrosion appearance of the evaluated area
Recommendation: The overall corrosion rating is a primary output of each inspection. Requiring it ensures that every inspection produces at least one summary assessment of condition. The descriptive scale with percentage ranges supports consistent, comparable recording.
Has any blistering been observed at this inspection?
Recommendation: Blistering is tracked separately from general corrosion because it often indicates a different failure mechanism. Requiring this question at each inspection ensures blistering is systematically assessed and any changes are captured over time.
Overall view of specimen set before exposure (each specimen marked with its identifier)
Recommendation: A pre-exposure photograph provides the visual baseline against which all subsequent images are compared. Requiring this upload ensures a consistent starting point for the photographic record and supports interpretation of later visual changes.
Were any deviations from the intended test conditions recorded during the exposure?
Recommendation: Documenting deviations is important for evaluating how confidently the results can be interpreted. Requiring this question at the monitoring stage ensures that any condition variations are captured and can be considered when drawing conclusions.
Was the spent salt solution disposed of in accordance with local site practice?
Recommendation: This question documents the handling of spent test solution, which is an operational and environmental consideration. Requiring it ensures disposal arrangements are recorded. The specific requirements may vary by jurisdiction and site; this form does not determine what disposal practice is appropriate.
Summary of observations across the full exposure (in chronological order)
Recommendation: A chronological narrative summary consolidates the key observations from all inspections into a single reference. Requiring it ensures the record includes a readable account of how the test progressed, which supports any subsequent review or report writing.
Overall outcome recorded for this test
Recommendation: The overall outcome is the principal conclusion of the test record. Requiring a clear outcome selection ensures the record is decisive and actionable. The branching follow-ups capture detail for failures, inconclusive results or ongoing exposures.
Name of person completing the form
Recommendation: Naming the form completer establishes accountability for the record's contents. It is a standard element of quality documentation and supports follow-up if questions arise about the entries.
Signature of person completing the form
Recommendation: The completer's signature confirms that the entries reflect their observations and measurements. Requiring it supports the integrity of the test record. The form appropriately states that signing confirms accuracy as understood at the time.
Date of completion
Recommendation: The completion date establishes when the record was finalised and supports document management. Requiring it ensures the record has a clear endpoint.
Name of reviewer/approver
Recommendation: Naming the reviewer creates a second point of accountability and supports the review process. Requiring it ensures that a named individual has reviewed the record before it is considered complete.
Signature of reviewer/approver
Recommendation: The reviewer's signature confirms that a second person has examined the record. This supports quality assurance of the test documentation. Whether a formal two-signature process is needed depends on the organisation's quality system.
I have checked that the sample identifiers, test conditions, inspection entries and photographic references in this record are complete and internally consistent
Recommendation: This checkbox serves as a final completeness and consistency check before sign-off. Requiring it prompts the reviewer to actively verify key elements rather than passively sign. It is a practical quality gate within the record-keeping process.
Do you approve release of these results to the requesting party?
Recommendation: The release approval question ensures that results are reviewed before being shared externally or used for decisions. The branching follow-ups capture either the release reference or what needs to be resolved. Requiring this step supports appropriate control over how results are communicated.
Balancing data collection depth against completion rates: This form contains a substantial number of mandatory fields, reflecting the thorough documentation expected for laboratory corrosion testing. The mandatory selections are generally well-chosen, focusing on identification, method conditions, rating outputs and sign-off. For shorter or less formal test records, some facility and personnel details could potentially be made optional, though this depends on the organisation's traceability requirements. The long-form nature of the form suggests it may be completed progressively over the duration of the exposure rather than in a single session, which naturally distributes the data entry effort.
Conditional logic: The form makes excellent use of conditional follow-ups throughout. Questions about pre-test preparation, scribe lines, blistering, multi-layer coatings and acceptance criteria all branch to collect detail only when relevant. This reduces unnecessary fields and keeps the form focused. Future revisions could consider applying similar logic to some of the mandatory sign-off fields if the form is used in contexts where a single-signature process is sufficient.
Best practices for mandatory field selection and placement: The mandatory fields are distributed across all 13 sections, ensuring that no part of the record is left entirely optional. Key test parameters (temperature, concentration, duration) and key outputs (corrosion rating, blistering status, outcome) are correctly mandatory. The form avoids making purely descriptive or optional fields mandatory, which helps maintain completion efficiency. Consider grouping the sign-off section's mandatory fields clearly so the reviewer understands which confirmations are required before release.
Observations on number and placement: With 41 mandatory fields across a detailed form, the proportion is proportionate to the form's purpose as a formal laboratory record. Users should be aware that the inspection sections may need to be completed multiple times as the exposure proceeds, which amplifies the mandatory field workload at each interval. If the form is digitised, consider implementing save-and-resume functionality and clear progress indicators to support completion over multiple sessions.
To configure an element, select it on the form.